Feature Request (Routers)
219
VotesUpdated on Sep 2, 2024: We're thrilled to announce the rollout of new official firmware rolling out for multiple routers, including the BE, AX, and AC series, which introduces EasyMesh in AP Mode as a
OnemeshEasyMesh
59745Views
16
VotesWill the Archer C6 v3.20 router be updated to easymesh? Satellite device, update mode
EasyMeshOnemesh
By
Kacper772
· Latest post 2 weeks ago
by TanvirKhan
2756Views
0
VotesHope to add onemesh or Easymesh to this router
EasyMeshOnemesh
By
Qing14Tpro
· Latest post 2025-10-17 21:29:00
by Vendex
111Views
1
VotesHello, I have two routers Archer AX23 both V2. I use one as a standard router and the second as a satellite router to create mesh. I have noticed that when I had only main router runing my SSID was hi
EasyMeshOnemeshhidden SSID
1089Views
1
VotesI have several of these routers, and was originally planning to use some as mesh satellites before discovering that functionality wasn't supported. There have been no feature updates since its release
EasyMeshOnemeshEasyMesh Ethernet Backhaul
By
MeshHunter
· Latest post 2025-08-30 16:16:10
by TheMikeT
450Views
0
VotesAn Outdoor Mesh device would be very useful, preferably with compatibility with the AX11000 router and RE700X. Not sure if this is even possible as currently external hardware are all wired devices? T
OnemeshEasyMeshAX11000
315Views
0
VotesHello, Will any future firmware updates enable OneMesh compatibility on the Archer C20 V4 for seamless Wi-Fi network integration? Is OneMesh support a feature that can be enabled through software upda
Onemesh
1186Views
0
VotesAfter buying this router for just 2 years and has gone out of date, recommended by a friend said it has OneMesh or EasyMesh feature or what so ever. Now as I need to setup a Mesh in home and bought a
EasyMeshOnemesh
By
AntiSocialer
· Latest post 2024-11-25 16:47:38
by AntiSocialer
4265Views
0
VotesHi There, I'm using MR600 and XC220-G3v. XC220-G3v supports EasyMesh but not detecting MR600 since it is OneMesh. Need firmware update that enables MR600 EasyMesh compatability, ideally with Ethernet
EasyMeshOnemeshEasyMesh Ethernet Backhaul
544Views
3
VotesI hope someone from TP-Link will actually bother to get back to me because twice now, no response...
The Ax11000 has recieved TWO firmware updates in quick succession for various reasons (I think 1.3.3 was security patches and the latest 1.3.4 is a homecare/qos bug fix). Why can't TP-Link combine the
EasyMeshOnemeshAX11000
2461Views