Pharos Wireless Bridges Forums - Business Community

With a high transmit power and antenna gain, TP-Link Pharos Products are perfect for long-distance wireless connections. The communication distance ranges from several kilometers to dozens of kilomete

By

Jocelyn

0Helpful

4857Views

1Replies

CPE220 V3 Limited Channel Width

Hello Folks I have CPE220 that (planned to be) used for replacing my old bridge which is competitor model (T*nda O3) I choose the CPE220 since it's advertised as 300Mbps optimum throughput compared to

Pharos ControlNetwork Connectivity

By dmrwck

0Helpful

37Views

0Replies

Access point

Hi guys I'm after some help if possible I've factory reset my aP and now can't reconfigure it when I try to go to the setup my computer won't allow access please help and many thanks

By Sd1414 · Latest post Tuesday by Sd1414

0Helpful

119Views

7Replies

Port Being Stuck in 10Mbps - FD Mode

I have two CPE610 antennas. On the AP side, Port0 shows 100Mbps - FD, but on the client side, Port0 shows 10Mbps - FD. I checked with different PoE adapters and LAN cables, but the result is the same.

By MRDMR · Latest post a week ago by Nathan-TP

0Helpful

199Views

5Replies

Tp-Link CPE 220

I configure everything absolutely correctly and when I want to connect to WI-FI it tells me it cannot connect. Why, and if anyone can help me?

Outdoor Wi-Fi SolutionPharos ControlNetwork Connectivity

By Edi1231 · Latest post a week ago by Nathan-TP

0Helpful

142Views

1Replies

CPE710 SSH Reboot command returns "operation not permitted"

SSH is enabled. SSH to device. Login with admin Try to issue reboot command Get "operation not permitted" Try with sudo, get sudo not found

By wifipete · Latest post 3 weeks ago by wifipete

1Helpful

153Views

2Replies

2 CPE510s in AP/Client modes - client keeps connecting/disconnecting in a loop

Hi all, Hoping for some assistance. I have 2 CPE510s set in a AP/Client mode. On the AP side, it is connected to an MR550 4G router, which also holds the DHCP and the whole network. They are only play

Outdoor Wi-Fi Solution

By smunisto · Latest post 2026-05-19 01:06:54 by Gabriel-TP

0Helpful

190Views

1Replies

How many 4mp camera can a CPE510 using PTMP

As the subject said, how many 4MP cameras can a CPE510 using PTMP connection? The farthest one would be around 1km 1 CPE510 = ? 4mp camera

Outdoor Wi-Fi SolutionRepeater/Bridge ModeNetwork Connectivitycctv

By Jkyong · Latest post 2026-05-14 06:53:30 by Gabriel-TP

0Helpful

194Views

1Replies

CPE710 AP Side gets Stuck every 12 to 48 hours randomely.

So, I have CPE710 as AP and Client. Client Side there are 50+ users and 4 NVRs. And AP Side there is DHCP Controller - Fortinet Fortigate. This is AP This is Client. Can you guys help me solve the iss

Network Connectivity

By SagarThummar · Latest post 2026-05-01 07:08:42 by Gabriel-TP

0Helpful

287Views

1Replies

CPE710 client

Today I tried to set up CPE710 as client. At Survey I couldn't finde any SSID. I tried my home router and hot spot S23 Ultra. No SSID found. Setting are on both 5Mhz. The Status page shows N/A for sig

By ddarjo · Latest post 2026-04-28 02:31:10 by Vincent-TP

2Helpful

439Views

3Replies

Wireless audio communucation

I would like to connect microphone at one end and speaker at the other end at a distance of four kms . Can we achieve this using cpe210 at both ends. If possible how to do it. The problem is to transm

Presales

By Nagaendra · Latest post 2026-04-20 10:05:26 by Nathan-TP

0Helpful

318Views

1Replies

CPE710 Web UI bug

I found a bug on WEB UI of the CPE710 with lastest UN firmware. Signal strength of stations are shown buggy, all stations have same values if you choose to show it separately (chain0/chain1). If you s

Firmware UpdateOutdoor Wi-Fi Solution

By phongtom · Latest post 2026-04-20 08:59:46 by Vincent-TP

0Helpful

223Views

1Replies