Switches
TP-Link Business Switches are comprised of JetStream series and LiteWave series, which are designed to offer reliable and professional choices to businesses of all sizes. Anything related to TP-Link's JetStream or LiteWave Switches, welcome to ask questions, join discussions and share your experience/ knowledge here.
Switches
Hi, I am new to the forum. I had trouble finding the correct version of the Easy Smart Configuration Utility using my model number TL-SG1024DE v6.0 It only went as high as v4.26. So thanks to another
ConfigurationSG1024DE
1Helpful
96Views
Good morning, I have a problem with a TL-SG1024DE switch which was not recognized despite a reset, still nothing on the OMADA interface. I connected an AP's to it which was recognized and configured.
Controller Related
3Helpful
152Views
Hi, I need some assistance with setting up VLANs on a OC200 cloud controller and a SG2428P switch. All firmware is up to date. I have a Cisco router. It is set up with 3 VLANs: 10 192.168.1.x Main Sta
VLAN & Multi-NetworksConfiguration
By
dbdan22
0Helpful
102Views
I created multiple VLANs on the switch. Then I enabled DHCP server and created pools. What I want that client personal computers get IP address from DHCP server depending on VLAN (ie: PCs connected to
DHCP ServiceVLAN & Multi-Networks
2Helpful
263Views
Been looking at the TP-Link TL-SG3428 managed switch and need to know if this unit will be suitable to run dante audio devices, our seup is 4x macs with virtual sound card and ferrofish verto 64 dante
By
GBNorwich
0Helpful
66Views
Hallo Commits, maybe there is somebody who can help me with my trouble. Task: sending PC screen via HDMI-signal via LAN IP to TV HDMI port. The problem is how to send the signal over the switch TL-SG2
DHCP ServiceNetwork ConnectivityConfigurationVLAN & Multi-Networks
3Helpful
227Views
We utilize various POE switches, including 8-port, 24-port, and 48-port models, all sourced from TP-Link. We implement a PD device with a power rating of up to 10W, employing the LM5071 as our POE PD
PoE
By
SUNDARAMOORTHI
· Latest post 2024-04-07 02:43:42
by Clive_A
1Helpful
79Views
Hi all, I'm redoing my network and I had some questions about the best practices for employing multiple trunks (without a LAGG) from my router (OPNSense) to my TL-SG3428X-M2 switch. Currently my setup
VLAN & Multi-NetworksSwitch ACLConfigurationStatic Routing
1Helpful
122Views
Configuration GuideHow to Set Up Switch as DHCP Server on Omada SDN Controller
Background: This post provides a configuration guide to set up the DHCP server on the Omada switch in Controller mode. This Article Applies to: All Omada switches that support DHCP servers. Applicatio
VLAN & Multi-NetworksConfigurationDHCP Service
4Helpful
248Views
Hello. With the setup below, I'm trying to have multiple VLANs going through a single network cable between my tplink switch and my pfsense. I had no problem doing so between my cisco switch and my pf
VLAN & Multi-NetworksConfigurationDHCP ServiceNetwork Connectivity
1Helpful
153Views