Powerline Adapters

The Powerline Adapters are mainly designed to extend your network to any room via existing power line. They are quite easy to setup while the transmission is stable and fast. In this section you can say hello to other members, ask, answer or discuss technical topics regarding Powerline Adapters.
Powerline Adapters

Tags

Label

 
This Article Applies to: TL-WPA7510, TL-WPA9610, TL-WPA8730/8630(P) V2, WPA4220 V3, etc. Problem Description/ Phenomenon: What is Smart DHCP, and How does Smart DHCP work? Visit TP-Link Smart DHCP Mak
Highlighted ThreadOfficial
By Solla-topee · Latest post 2023-05-26 19:51:04 by Nor7on
112Helpful
66924Views
200Replies
I recently added a TL-WPA8631P Extender to my TL-PA9033P powerline network. I used the WPS method to configure the WiFi settings to match the Plusnet Hub Two router, but this only worked for 2.4GHz, d
InstallationWi-Fi Clone
By David-B99 · Latest post 3 hours ago by woozle
0Helpful
27Views
3Replies
I have recently added a TL-WPA8631P to a powerline network based on a TL-PA8033P Kit. This was to add a WiFi boost for my EV Charger, which has been dropping off. The main router is a Plusnet Smart Hu
Wi-Fi Clone
By David-B99 · Latest post 13 hours ago by David-B99
1Helpful
59Views
4Replies
I have now had 4 of these devices fail with the "no lights" problem - i.e. not even the power light shows when you plug them in and the reset/link button doesn't do anything to change this. I have qui
By Finnkai · Latest post Wednesday by Kevin_Z
0Helpful
1257Views
2Replies
I have a TL-WPA4220 kit with Powerline 600Mps extenders (2). When operating the powerline LED on the adapter is blinking - but steady ON on the extender. What exactly does the Powerline LED tell you?
By Erky32 · Latest post a week ago by Joseph-TP
0Helpful
76Views
1Replies
Hi,I was trying to upgrade the firmware of my PG2400P Powerline adapters. I successfully updated the unit with Wi-Fi, but the other unit always gives me the error message “Invalid file type.” when I s
By PLCUser · Latest post a week ago by woozle
0Helpful
103Views
2Replies
I am considering to buy a Deco mesh router. I have 3 WPA8631P powerline adaptors. Does it make sense to connect the mesh routers to the adaptors to get a more stable network?
By libo1949 · Latest post a week ago by woozle
1Helpful
61Views
1Replies
Problems since day one.. My speeds are terrible on all devices cannot to my tp link extender. I tried all methods to set it up but the only that worked was pairing the devices (I need to replicate my
Network Connectivity
By withnail69 · Latest post 2 weeks ago by withnail69
2Helpful
683Views
13Replies
I have a TL-PA4020P near router and TL-WPA4220 in salon room. Last 10 years works very good. The last 6 months have intermittent breaks of signal (Pixel and screen not updated but song is good). The T
Network Connectivity
By Angel_Camacho · Latest post 2 weeks ago by Joseph-TP
0Helpful
999Views
1Replies
I set this up and my internet speed is worse than connecting to the main router. I set the adapter half way up the house but it's very poor (0.29 mbps)
Network Connectivity
By Seinan · Latest post 2 weeks ago by Joseph-TP
0Helpful
256Views
1Replies
123...
123...