First time 1Gbps now just 100Mbps
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
First time 1Gbps now just 100Mbps
Model :
Hardware Version :
Firmware Version :
ISP :
Hello , first i want to apologize if i post in a wrong thread , secondly my english isn't that good so i'll do some mistakes
I'm a owner of a Archer C2 ( Firmware Version:0.9.1 5.0 v0032.0 Build 170207 Rel.49213n [B]Hardware Version:Archer C2 v1 00000002 ) ,[/B]and i have ethernet from local network supplier with a 1000Mbps on fiber .
About a mounth ago , my speed test fall to 100mbps each time but only on my PC . Other gigabyte devices in my home work perfectly at full speed . I assume that it's because of upgrading my OS version from windows 7 to windows 10 , because in that time my network speed lose horsepowers . After some research i found that ethernet driver for my board isn't supporting windows 10 at all , and they did a conversion of a windows 8 driver for 10 , anyway , i'm back to windows 7 , back to my driver , but isn't working the same .
When i check my network adapters properties it say 1 Gbps but when i go to Advance / Speed & Duplex it only show from 10 to 100 Mbps Half or Full Duplex , but not 1000 Mbps .
I tried a lot of things like unninstaling / installing , reinstalling , remove any version and kind of software ; i re-re-re-reconfigure my modem ; i tried to change energy saving settings to disable for not limit my speed but no chance .
Please , if you could suggest another thing to try , i'll do .
Best regards , Mike
P.S I will let my network - pc configuration
OS : WINDOWS 7 Enterprise Service Pack 1
Motherboard : Asrock FM2A88x Extreme4+ with Lan Qualcomm Atheros AR8171
CPU : AMD A10 7700 3.4 Ghz
RAM : 8 GB
STORAGE : Intel SSD SC2BW 120A4 *primary
Western Digital WD5003AZEX-00MK2A0
Hardware Version :
Firmware Version :
ISP :
Hello , first i want to apologize if i post in a wrong thread , secondly my english isn't that good so i'll do some mistakes
I'm a owner of a Archer C2 ( Firmware Version:0.9.1 5.0 v0032.0 Build 170207 Rel.49213n [B]Hardware Version:Archer C2 v1 00000002 ) ,[/B]and i have ethernet from local network supplier with a 1000Mbps on fiber .
About a mounth ago , my speed test fall to 100mbps each time but only on my PC . Other gigabyte devices in my home work perfectly at full speed . I assume that it's because of upgrading my OS version from windows 7 to windows 10 , because in that time my network speed lose horsepowers . After some research i found that ethernet driver for my board isn't supporting windows 10 at all , and they did a conversion of a windows 8 driver for 10 , anyway , i'm back to windows 7 , back to my driver , but isn't working the same .
When i check my network adapters properties it say 1 Gbps but when i go to Advance / Speed & Duplex it only show from 10 to 100 Mbps Half or Full Duplex , but not 1000 Mbps .
I tried a lot of things like unninstaling / installing , reinstalling , remove any version and kind of software ; i re-re-re-reconfigure my modem ; i tried to change energy saving settings to disable for not limit my speed but no chance .
Please , if you could suggest another thing to try , i'll do .
Best regards , Mike
P.S I will let my network - pc configuration
OS : WINDOWS 7 Enterprise Service Pack 1
Motherboard : Asrock FM2A88x Extreme4+ with Lan Qualcomm Atheros AR8171
CPU : AMD A10 7700 3.4 Ghz
RAM : 8 GB
STORAGE : Intel SSD SC2BW 120A4 *primary
Western Digital WD5003AZEX-00MK2A0