In the official website, T2U only support 2.6~3.16. The chip is MT7610U

Current Ubuntu 16.04 is using kernel 4.4. Kindly please provide support on it. Thank you.

Hi all.
Please find in this repository updated driver, ready for 4.13 kernel and newer : https://github.com/BZHDeveloper/mt7610u_wifi_sta_v3002_dpo_20130916

Hi BZHDeveloper,

Thanks for the new driver. I can compile the codes successfully, but it cannot run.

Here are the outputs:

Result on Ubuntu 16.04:

[CODE]# uname -rv
4.4.0-98-generic #121-Ubuntu SMP Tue Oct 10 14:24:03 UTC 2017

# ifconfig ra0 up
# dmesg
...
...
[ 162.941023] rtusb init rt2870 --->
[ 162.941042] usbcore: registered new interface driver rt2870
[ 175.173892] usb 1-5.4: new high-speed USB device number 4 using xhci_hcd
[ 175.289802] usb 1-5.4: New USB device found, idVendor=148f, idProduct=761a
[ 175.289810] usb 1-5.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 175.289815] usb 1-5.4: Product: WiFi
[ 175.289819] usb 1-5.4: Manufacturer: MediaTek
[ 175.289822] usb 1-5.4: SerialNumber: 1.0
[ 175.290888]

=== pAd = ffffc90002eef000, size = 895280 ===

[ 175.291008] <-- RTMPAllocTxRxRingMemory, Status=0
[ 175.291224] <-- RTMPAllocAdapterBlock, Status=0
[ 175.291352] ==>RT65xx_WLAN_ChipOnOff(): OnOff:1, Reset= 0, pAd->WlanFunCtrl:0x0, Reg-WlanFunCtrl=0xff000002
[ 175.292236] MCUType = 2
[ 175.292363] NVM is EFUSE
[ 175.292367] Endpoint(8) is for In-band Command
[ 175.292370] Endpoint(4) is for WMM0 AC0
[ 175.292373] Endpoint(5) is for WMM0 AC1
[ 175.292375] Endpoint(6) is for WMM0 AC2
[ 175.292377] Endpoint(7) is for WMM0 AC3
[ 175.292379] Endpoint(9) is for WMM1 AC0
[ 175.292382] Endpoint(84) is for Data-In
[ 175.292384] Endpoint(85) is for Command Rsp
[ 175.308610] cfg80211: World regulatory domain updated:
[ 175.308612] cfg80211: DFS Master region: unset
[ 175.308613] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 175.308614] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 175.308615] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 175.308616] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[ 175.308617] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[ 175.308618] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[ 175.308619] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[ 175.308620] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[ 175.308621] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[ 175.827595] IPv6: ADDRCONF(NETDEV_UP): ra0: link is not ready
[ 175.833028] -->RTUSBVenderReset
[ 175.833107] <--RTUSBVenderReset
[ 175.838069] fw version:0.1.00 build:7640
[ 175.838070] build time:201308221655____
[ 175.838073] ilm length = 68780(bytes)
[ 175.838074] dlm length = 11476(bytes)
[ 175.913812] #
[ 175.920332] loading fw......
[ 176.029635] #
[ 176.241554] RTMP_TimerListAdd: add timer obj ffffc90002f70250!
[ 176.241556] RTMP_TimerListAdd: add timer obj ffffc90002f702c8!
[ 176.241557] RTMP_TimerListAdd: add timer obj ffffc90002f70340!
[ 176.241557] RTMP_TimerListAdd: add timer obj ffffc90002f701d8!
[ 176.241558] RTMP_TimerListAdd: add timer obj ffffc90002f70070!
[ 176.241559] RTMP_TimerListAdd: add timer obj ffffc90002f700e8!
[ 176.241559] RTMP_TimerListAdd: add timer obj ffffc90002f02d48!
[ 176.241560] RTMP_TimerListAdd: add timer obj ffffc90002ef1b80!
[ 176.241560] RTMP_TimerListAdd: add timer obj ffffc90002ef1c00!
[ 176.241561] RTMP_TimerListAdd: add timer obj ffffc90002f02ed0!
[ 176.241561] RTMP_TimerListAdd: add timer obj ffffc90002f02c58!
[ 176.241562] RTMP_TimerListAdd: add timer obj ffffc90002f02e58!
[ 176.241573] RtmpOSFileOpen(): Error 2 opening /etc/Wireless/RT2870STA/RT2870STA.dat
[ 176.241574] Open file "/etc/Wireless/RT2870STA/RT2870STA.dat" failed!
[ 176.241574] 1. Phy Mode = 6
[ 176.241580] ERROR!!! RTMPReadParametersHook failed, Status[=0x00000001]
[ 176.296562] Bulk In Failed. Status=-2, BIIdx=0x0, BIRIdx=0x0, actual_length= 0x0
[ 176.306618] CMDTHREAD_RESET_BULK_IN: Cannot do bulk in because flags(0x11080042) on !
[ 176.306762] receive cmd msg fail(-2)
[ 176.306784] tx_kickout_fail_count = 0
[ 176.306784] tx_timeout_fail_count = 0
[ 176.306785] rx_receive_fail_count = 0
[ 176.306785] alloc_cmd_msg = 35
[ 176.306786] free_cmd_msg = 35
[ 176.306790] !!! rt28xx init fail !!!
[ 176.314473] -->RTUSBVenderReset
[ 176.314539] <--RTUSBVenderReset
[ 176.319506] fw version:0.1.00 build:7640
[ 176.319507] build time:201308221655____
[ 176.319510] ilm length = 68780(bytes)
[ 176.319511] dlm length = 11476(bytes)
[ 176.393827] #
[ 176.399970] loading fw......
[ 176.509838] #
[ 176.721835] RTMP_TimerListAdd: add timer obj ffffc90002f70250!
[ 176.721837] RTMP_TimerListAdd: add timer obj ffffc90002f702c8!
[ 176.721837] RTMP_TimerListAdd: add timer obj ffffc90002f70340!
[ 176.721838] RTMP_TimerListAdd: add timer obj ffffc90002f701d8!
[ 176.721839] RTMP_TimerListAdd: add timer obj ffffc90002f70070!
[ 176.721840] RTMP_TimerListAdd: add timer obj ffffc90002f700e8!
[ 176.721840] RTMP_TimerListAdd: add timer obj ffffc90002f02d48!
[ 176.721841] RTMP_TimerListAdd: add timer obj ffffc90002ef1b80!
[ 176.721841] RTMP_TimerListAdd: add timer obj ffffc90002ef1c00!
[ 176.721842] RTMP_TimerListAdd: add timer obj ffffc90002f02ed0!
[ 176.721843] RTMP_TimerListAdd: add timer obj ffffc90002f02c58!
[ 176.721843] RTMP_TimerListAdd: add timer obj ffffc90002f02e58!
[ 176.721847] RtmpOSFileOpen(): Error 2 opening /etc/Wireless/RT2870STA/RT2870STA.dat
[ 176.721848] Open file "/etc/Wireless/RT2870STA/RT2870STA.dat" failed!
[ 176.721849] 1. Phy Mode = 6
[ 176.721849] ERROR!!! RTMPReadParametersHook failed, Status[=0x00000001]
[ 176.776794] Bulk In Failed. Status=-2, BIIdx=0x0, BIRIdx=0x0, actual_length= 0x0
[ 176.786894] CMDTHREAD_RESET_BULK_IN: Cannot do bulk in because flags(0x11080042) on !
[ 176.787071] receive cmd msg fail(-2)
[ 176.787093] tx_kickout_fail_count = 0
[ 176.787094] tx_timeout_fail_count = 0
[ 176.787094] rx_receive_fail_count = 0
[ 176.787095] alloc_cmd_msg = 35
[ 176.787095] free_cmd_msg = 35
[ 176.787100] !!! rt28xx init fail !!!
[ 177.802770] ==>RT65xx_WLAN_ChipOnOff(): OnOff:0, Reset= 0, pAd->WlanFunCtrl:0xff000003, Reg-WlanFunCtrl=0xff000003
[ 177.802905] tx_kickout_fail_count = 0
[ 177.802905] tx_timeout_fail_count = 0
[ 177.802906] rx_receive_fail_count = 0
[ 177.802906] alloc_cmd_msg = 35
[ 177.802906] free_cmd_msg = 35
[ 186.985929] #
[ 186.990915] #
[ 186.995885] #
[ 187.000851] #
[ 187.005817] #
[ 187.010783] #
[ 187.015750] #
[ 187.020715] #
[ 187.025712] #
[ 187.030719] #
[ 187.035697] RTUSB_VendorRequest failed(-113),TxFlags=0x0, ReqType=IN, Req=0x7, Idx=0x80,pAd->Flags=0x508a0042
[ 187.035698] ==>RT65xx_WLAN_ChipOnOff(): OnOff:1, Reset= 0, pAd->WlanFunCtrl:0xff000000, Reg-WlanFunCtrl=0xffffffff
[ 187.035699] #
[ 187.040684] #
[ 187.045662] #
[ 187.050643] #
[ 187.055617] #
[ 187.060581] #
[ 187.065562] #
[ 187.070567] #
[ 187.075548] #
[ 187.080513] #
[ 187.085511] RTUSB_VendorRequest failed(-113),TxFlags=0x0, ReqType=OUT, Req=0x6, Idx=0x80,pAd->Flags=0x508a0042
[ 187.085512] VendrCmdMultiWrite_nBytes failed!
[ 187.085532] #
[ 187.090499] #
[ 187.095469] #
[ 187.100433] #
[ 187.105471] #
[ 187.110467] #
[ 187.115446] #
[ 187.120412] #
[ 187.125388] #
[ 187.130353] #
[ 187.135335] RTUSB_VendorRequest failed(-113),TxFlags=0x0, ReqType=IN, Req=0x7, Idx=0x1000,pAd->Flags=0x508a0042
[ 187.135335] #
[ 187.140331] #
[ 187.145313] #
[ 187.150277] #
[ 187.155256] #
[ 187.160247] #
[ 187.165227] #
[ 187.170192] #
[ 187.175167] #
[ 187.180218] #
[ 187.185220] RTUSB_VendorRequest failed(-113),TxFlags=0x0, ReqType=IN, Req=0x7, Idx=0x20,pAd->Flags=0x508a0042
[ 187.185221] #
[ 187.190204] #
[ 187.195184] #
[ 187.200151] #
[ 187.205204] #
[ 187.210187] #
[ 187.215161] #
[ 187.220143] #
[ 187.225127] #
[ 187.230092] #
[ 187.235080] RTUSB_VendorRequest failed(-113),TxFlags=0x0, ReqType=IN, Req=0x7, Idx=0x80,pAd->Flags=0x508a0042
[ 187.235084] #
[ 187.240048] #
[ 187.245054] #
[ 187.250018] #
[ 187.254983] #
[ 187.259952] #
[ 187.264928] #
[ 187.269908] #
[ 187.274881] #
[ 187.279855] #
[ 187.284824] RTUSB_VendorRequest failed(-113),TxFlags=0x0, ReqType=IN, Req=0x7, Idx=0x1000,pAd->Flags=0x0
[ 187.289785] #
[ 187.294752] #
[ 187.299722] #
[ 187.304695] #
[ 187.309724] #
[ 187.314700] #
[ 187.319678] #
[ 187.324643] #
[ 187.329608] #
[ 187.334579] #
[ 187.339544] RTUSB_VendorRequest failed(-113),TxFlags=0x0, ReqType=IN, Req=0x7, Idx=0x1000,pAd->Flags=0x0
[ 187.344505] #
[ 187.349477] #
[ 187.354449] #
[ 187.359435] #
[ 187.364468] #
[ 187.369452] #
[ 187.374499] #
[ 187.379488] #
[ 187.384453] #
[ 187.389432] #
[ 187.394431] RTUSB_VendorRequest failed(-113),TxFlags=0x0, ReqType=IN, Req=0x7, Idx=0x1000,pAd->Flags=0x0
[ 187.399392] #
[ 187.404371] #
[ 187.409346] #
[ 187.414336] #
[ 187.419306] #
[ 187.424270] #
[ 187.429255] #
[ 187.434228] #
[ 187.439204] #
[ 187.444169] #
[ 187.449137] RTUSB_VendorRequest failed(-113),TxFlags=0x0, ReqType=IN, Req=0x7, Idx=0x1000,pAd->Flags=0x0
[ 187.454098] #
[ 187.459063] #
[ 187.464033] #
[ 187.469017] #
[ 187.473981] #
[ 187.478946] #
[ 187.483934] #
[ 187.488925] #
[ 187.493901] #
[ 187.498884] #
[ 187.503929] RTUSB_VendorRequest failed(-113),TxFlags=0x0, ReqType=IN, Req=0x7, Idx=0x1000,pAd->Flags=0x0
[ 187.508890] #
[ 187.513856] #
[ 187.518859] #
[ 187.523868] #
[ 187.528845] #
[ 187.533854] #
[ 187.538830] #
[ 187.543810] #
[ 187.548800] #
[ 187.553788] #
[ 187.558776] RTUSB_VendorRequest failed(-113),TxFlags=0x0, ReqType=IN, Req=0x7, Idx=0x1000,pAd->Flags=0x0
[ 187.563737] #
[ 187.568702] #
[ 187.573682] #
[ 187.578655] #
[ 187.583631] #
[ 187.588608] #
[ 187.593581] #
[ 187.598547] #
[ 187.603534] #
[ 187.608501] #
[ 187.613488] RTUSB_VendorRequest failed(-113),TxFlags=0x0, ReqType=IN, Req=0x7, Idx=0x1000,pAd->Flags=0x0
[ 187.618449] #
[ 187.623413] #
[ 187.628378] #
[ 187.633352] #
[ 187.638317] #
[ 187.643289] #
[ 187.648265] #
[ 187.653251] #
[ 187.658215] #
[ 187.663244] #
[ 187.668226] RTUSB_VendorRequest failed(-113),TxFlags=0x0, ReqType=IN, Req=0x7, Idx=0x1000,pAd->Flags=0x0
[ 187.673187] #
[ 187.678224] #
[ 187.683224] #
[ 187.688234] #
[ 187.693199] #
[ 187.698270] #
[ 187.703256] #
[ 187.708230] #
[ 187.713208] #
[ 187.718173] #
[ 187.723157] RTUSB_VendorRequest failed(-113),TxFlags=0x0, ReqType=IN, Req=0x7, Idx=0x1000,pAd->Flags=0x0
[ 187.728118] #
[ 187.733125] #
[ 187.738096] #
[ 187.743078] #
[ 187.748048] #
[ 187.753027] #
[ 187.758011] #
[ 187.762976] #
[ 187.767947] #
[ 187.772912] #
[ 187.777882] RTUSB_VendorRequest failed(-113),TxFlags=0x0, ReqType=IN, Req=0x7, Idx=0x1000,pAd->Flags=0x0
[ 187.782844] #
[ 187.787818] #
[ 187.792801] #
[ 187.797784] #
[ 187.802756] #
[ 187.807749] #
[ 187.812718] #
[ 187.817683] #
[ 187.822657] #
[ 187.827675] #
[ 187.832656] RTUSB_VendorRequest failed(-113),TxFlags=0x0, ReqType=IN, Req=0x7, Idx=0x1000,pAd->Flags=0x0
[ 187.837618] #
[ 187.842601] #
[ 187.847566] #
[ 187.852555] #
[ 187.857542] #
[ 187.862550] #
[ 187.867526] #
[ 187.872491] #
[ 187.877475] #
[ 187.882452] #
[ 187.887416] RTUSB_VendorRequest failed(-113),TxFlags=0x0, ReqType=IN, Req=0x7, Idx=0x1000,pAd->Flags=0x0
[ 187.892378] #
[ 187.897355] #
[ 187.902331] #
[ 187.907300] #
[ 187.912282] #
[ 187.917251] #
[ 187.922221] #
[ 187.927216] #
[ 187.932187] #
[ 187.937168] #
[ 187.942151] RTUSB_VendorRequest failed(-113),TxFlags=0x0, ReqType=IN, Req=0x7, Idx=0x1000,pAd->Flags=0x0
[ 187.947122] #
[ 187.952097] #
[ 187.957076] #
[ 187.962051] #
[ 187.967020] #
[ 187.971993] #
[ 187.976957] #
[ 187.981934] #
[ 187.986909] #
[ 187.991886] #
[ 187.996850] RTUSB_VendorRequest failed(-113),TxFlags=0x0, ReqType=IN, Req=0x7, Idx=0x1000,pAd->Flags=0x0
[ 188.001812] #
[ 188.006794] #
[ 188.011783] #
[ 188.016750] #
[ 188.021721] #
[ 188.026693] #
[ 188.031657] #
[ 188.036636] #
[ 188.041615] #
[ 188.046592] #
[ 188.051559] RTUSB_VendorRequest failed(-113),TxFlags=0x0, ReqType=IN, Req=0x7, Idx=0x1000,pAd->Flags=0x0
[ 188.056520] #
[ 188.061506] #
[ 188.066477] #
[ 188.071441] #
[ 188.076406] #
[ 188.081374] #
[ 188.086344] #
[ 188.091309] #
[ 188.096284] #
[ 188.101264] #
[ 188.106242] RTUSB_VendorRequest failed(-113),TxFlags=0x0, ReqType=IN, Req=0x7, Idx=0x1000,pAd->Flags=0x0
[ 188.111203] #
[ 188.116193] #
[ 188.121172] #
[ 188.126144] #
[ 188.131128] #
[ 188.136103] #
[ 188.141070] #
[ 188.146047] #
[ 188.151013] #
[ 188.155978] #
[ 188.160942] RTUSB_VendorRequest failed(-113),TxFlags=0x0, ReqType=IN, Req=0x7, Idx=0x1000,pAd->Flags=0x0
[ 188.165903] #
[ 188.170885] #
[ 188.175860] #
[ 188.180825] #
[ 188.185808] #
[ 188.190784] #
[ 188.195749] #
[ 188.200725] #
[ 188.205694] #
[ 188.210680] #
[ 188.215656] RTUSB_VendorRequest failed(-113),TxFlags=0x0, ReqType=IN, Req=0x7, Idx=0x1000,pAd->Flags=0x0
...
...
...and so on

# iwconfig
lo no wireless extensions.

vmnet1 no wireless extensions.

vmnet8 no wireless extensions.

ra0 Ralink STA Mode:Managed

eth0 no wireless extensions.
[/CODE]

Until I performed "rmmod mt7650u_sta":
[CODE][ 354.347832] RTUSB_VendorRequest failed(-113),TxFlags=0x0, ReqType=IN, Req=0x7, Idx=0x1000,pAd->Flags=0x0
[ 354.352794] #
[ 354.357761] #
[ 354.362726] #
[ 354.367740] #
[ 354.372705] #
[ 354.377699] #
[ 354.382667] #
[ 354.387639] #
[ 354.392642] #
[ 354.397608] #
[ 354.402573] RTUSB_VendorRequest failed(-113),TxFlags=0x0, ReqType=IN, Req=0x7, Idx=0x1000,pAd->Flags=0x0
[ 354.407535] #
[ 354.412499] #
[ 354.417489] #
[ 354.422465] #
[ 354.427454] #
[ 354.432429] #
[ 354.437415] #
[ 354.442393] #
[ 354.447417] #
[ 354.452381] #
[ 354.457358] RTUSB_VendorRequest failed(-113),TxFlags=0x0, ReqType=IN, Req=0x7, Idx=0x1000,pAd->Flags=0x0
[ 354.462320] WaitForAsicReady(0xffffffff):AsicNotReady!
[ 354.462321] !!! rt28xx init fail !!!
[ 376.791527] usbcore: deregistering interface driver rt2870
[ 377.968870] Bulk In Failed. Status=-108, BIIdx=0x0, BIRIdx=0x0, actual_length= 0x0
[ 377.968955] receive cmd msg fail(-108)
[ 377.968973] usb_rx_cmd_msg_complete:submit urb fail(-2)
[ 377.968980] usb_rx_cmd_msg_submit:submit urb fail(-2)
[ 377.968984] rtusb_disconnect: unregister usbnet usb-0000:00:14.0-5.4
[ 377.968986] RtmpOSNetDevDetach(): RtmpOSNetDeviceDetach(), dev->name=ra0!
[ 377.987546] ---> RTMPFreeTxRxRingMemory
[ 377.987554] <--- RTMPFreeTxRxRingMemory
[ 377.987589] RTUSB disconnect successfully
[ 377.987608] <--- rtusb exit

[/CODE]

Result on Suse leap 42.3:

[CODE] # uname -rv
4.4.92-31-default #1 SMP Sun Oct 22 06:56:24 UTC 2017 (1d80e8a)

# ifconfig ra0 up
SIOCSIFFLAGS: Operation not permitted

# iwconfig
lo no wireless extensions.

vmnet1 no wireless extensions.

eth1 no wireless extensions.

vmnet8 no wireless extensions.

ra0 Ralink STA ESSID:""
Mode:Auto Frequency=2.412 GHz Access Point: Not-Associated
Bit Rate:1 Mb/s
RTS thr:off Fragment thr:off
Encryption key:off
Link Quality=10/100 Signal level:0 dBm Noise level:0 dBm
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:0 Missed beacon:0

# iwlist ra0 scanning
ra0 No scan results

# dmesg
...
...
[ 278.881267] rtusb init rt2870 --->
[ 278.881327]

=== pAd = ffffc90003851000, size = 895280 ===

[ 278.881355] <-- RTMPAllocTxRxRingMemory, Status=0
[ 278.881408] <-- RTMPAllocAdapterBlock, Status=0
[ 278.881480] ==>RT65xx_WLAN_ChipOnOff(): OnOff:1, Reset= 0, pAd->WlanFunCtrl:0x0, Reg-WlanFunCtrl=0xff000413
[ 278.881846] MCUType = 2
[ 278.881925] NVM is EFUSE
[ 278.881926] Endpoint(8) is for In-band Command
[ 278.881926] Endpoint(4) is for WMM0 AC0
[ 278.881926] Endpoint(5) is for WMM0 AC1
[ 278.881927] Endpoint(6) is for WMM0 AC2
[ 278.881927] Endpoint(7) is for WMM0 AC3
[ 278.881927] Endpoint(9) is for WMM1 AC0
[ 278.881927] Endpoint(84) is for Data-In
[ 278.881927] Endpoint(85) is for Command Rsp
[ 278.882090] usbcore: registered new interface driver rt2870
[ 325.452950] usb 1-5.4: USB disconnect, device number 4
[ 325.453199] rtusb_disconnect: unregister usbnet usb-0000:00:14.0-5.4
[ 325.453204] RtmpOSNetDevDetach(): RtmpOSNetDeviceDetach(), dev->name=ra0!
[ 325.467739] WIFI device has been disconnected
[ 325.467748] ==>RT65xx_WLAN_ChipOnOff(): OnOff:0, Reset= 0, pAd->WlanFunCtrl:0xff000413, Reg-WlanFunCtrl=0xffffffff
[ 325.467749] WIFI device has been disconnected
[ 325.467750] VendrCmdMultiWrite_nBytes failed!
[ 325.467771] WIFI device has been disconnected
[ 325.467793] ---> RTMPFreeTxRxRingMemory
[ 325.467818] <--- RTMPFreeTxRxRingMemory
[ 325.467890] RTUSB disconnect successfully
[ 328.683617] usb 1-5.3: new high-speed USB device number 5 using xhci_hcd
[ 328.799903] usb 1-5.3: New USB device found, idVendor=148f, idProduct=761a
[ 328.799910] usb 1-5.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 328.799913] usb 1-5.3: Product: WiFi
[ 328.799915] usb 1-5.3: Manufacturer: MediaTek
[ 328.799917] usb 1-5.3: SerialNumber: 1.0
[ 328.800971]

=== pAd = ffffc9000392d000, size = 895280 ===

[ 328.801089] <-- RTMPAllocTxRxRingMemory, Status=0
[ 328.801292] <-- RTMPAllocAdapterBlock, Status=0
[ 328.801375] ==>RT65xx_WLAN_ChipOnOff(): OnOff:1, Reset= 0, pAd->WlanFunCtrl:0x0, Reg-WlanFunCtrl=0xff000002
[ 328.802095] MCUType = 2
[ 328.802220] NVM is EFUSE
[ 328.802223] Endpoint(8) is for In-band Command
[ 328.802224] Endpoint(4) is for WMM0 AC0
[ 328.802225] Endpoint(5) is for WMM0 AC1
[ 328.802226] Endpoint(6) is for WMM0 AC2
[ 328.802227] Endpoint(7) is for WMM0 AC3
[ 328.802228] Endpoint(9) is for WMM1 AC0
[ 328.802229] Endpoint(84) is for Data-In
[ 328.802230] Endpoint(85) is for Command Rsp
[ 351.358155] -->RTUSBVenderReset
[ 351.358195] <--RTUSBVenderReset
[ 351.363157] fw version:0.1.00 build:7640
[ 351.363158] build time:201308221655____
[ 351.363158] ilm length = 68780(bytes)
[ 351.363158] dlm length = 11476(bytes)
[ 351.438965] #
[ 351.445080] loading fw......
[ 351.554971] #
[ 351.767212] RTMP_TimerListAdd: add timer obj ffffc900039ae250!
[ 351.767213] RTMP_TimerListAdd: add timer obj ffffc900039ae2c8!
[ 351.767213] RTMP_TimerListAdd: add timer obj ffffc900039ae340!
[ 351.767214] RTMP_TimerListAdd: add timer obj ffffc900039ae1d8!
[ 351.767214] RTMP_TimerListAdd: add timer obj ffffc900039ae070!
[ 351.767215] RTMP_TimerListAdd: add timer obj ffffc900039ae0e8!
[ 351.767215] RTMP_TimerListAdd: add timer obj ffffc90003940d48!
[ 351.767215] RTMP_TimerListAdd: add timer obj ffffc9000392fb80!
[ 351.767215] RTMP_TimerListAdd: add timer obj ffffc9000392fc00!
[ 351.767216] RTMP_TimerListAdd: add timer obj ffffc90003940ed0!
[ 351.767216] RTMP_TimerListAdd: add timer obj ffffc90003940c58!
[ 351.767217] RTMP_TimerListAdd: add timer obj ffffc90003940e58!
[ 351.768735] RtmpOSFileOpen(): Error 2 opening /etc/Wireless/RT2870STA/RT2870STA.dat
[ 351.768736] Open file "/etc/Wireless/RT2870STA/RT2870STA.dat" failed!
[ 351.768736] 1. Phy Mode = 6
[ 351.768737] ERROR!!! RTMPReadParametersHook failed, Status[=0x00000001]
[ 351.823684] Bulk In Failed. Status=-2, BIIdx=0x0, BIRIdx=0x0, actual_length= 0x0
[ 351.823747] receive cmd msg fail(-2)
[ 351.823750] tx_kickout_fail_count = 0
[ 351.823751] tx_timeout_fail_count = 0
[ 351.823751] rx_receive_fail_count = 0
[ 351.823751] alloc_cmd_msg = 35
[ 351.823751] free_cmd_msg = 35
[ 351.823756] !!! rt28xx init fail !!!
[/CODE]

Can you please advice?
Thanks.

copy configuration file in this directory
[code] cp RT2870STA.dat /etc/Wireless/RT2870STA/RT2870STA.dat[/code]

if errors still occur, please try 'linux-4.10' branch
if errors still occur (again), I'll try to adapt code for kernel version 4.4

Hi BZHDeveloper,

After performing " cp RT2870STA.dat /etc/Wireless/RT2870STA/RT2870STA.dat", I am able to see ra0.

However, it will get hung once it tries to join to wireless network SSID

I tried both master and 'linux-4.10' branch, the errors are the same

--------------------------------------
openSuse Leap 42.3, master branch
--------------------------------------

[CODE]# ifconfig ra0 up
# iwpriv ra0 set NetworkType=Infra
# iwpriv ra0 set AuthMode=WPA2PSK
# iwpriv ra0 set SSID="MYSSID"
# iwpriv ra0 set WPAPSK="MYPASSWORD"
# iwpriv ra0 set WPA2PSK="MYPASSWORD"

# iwpriv ra0 get_site_survey
ra0 get_site_survey:
Ch SSID BSSID Security Siganl(%)W-Mode ExtCH NT

# iwpriv ra0 stat
ra0 stat:

Tx success = 32
Tx retry count = 0, PER=0.0%
Tx fail to Rcv ACK after retry = 0, PLR=0.00%
Rx success = 1366
Rx with CRC = 577, PER=29.6%
Rx drop due to out of resource = 0
Rx duplicate frame = 0
False CCA = 54625
RSSI = 0 0 0
SNR-A = 0
SNR-B (if available) = 0

WpaSupplicantUP = 1

# iwconfig
lo no wireless extensions.

vmnet1 no wireless extensions.

eth1 no wireless extensions.

vmnet8 no wireless extensions.

ra0 Ralink STA ESSID:"11n-AP" Nickname:"MT7610U_STA"
Mode:Auto Frequency=2.412 GHz Access Point: Not-Associated
Bit Rate:1 Mb/s
RTS thr:off Fragment thr:off
Encryption key:off
Link Quality=10/100 Signal level:0 dBm Noise level:0 dBm
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:0 Missed beacon:0

# ifconfig ra0
ra0 Link encap:Ethernet HWaddr C0:25:E9:2C:AE:FC
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:1366 errors:0 dropped:0 overruns:0 frame:0
TX packets:32 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:366027 (357.4 Kb) TX bytes:3244 (3.1 Kb)

# cat /etc/wpa_supplicant/wpa_supplicant.conf
ctrl_interface=/var/run/wpa_supplicant
ctrl_interface_group=wheel

network={
ssid="MYSSID"
key_mgmt=WPA-PSK
pairwise=CCMP
proto=RSN
psk="MYPASSWORD"
auth_alg=OPEN
}


# wpa_supplicant -Dwext -ira0 -c /etc/wpa_supplicant/wpa_supplicant.conf -d
wpa_supplicant v2.2
random: Trying to read entropy from /dev/random
Successfully initialized wpa_supplicant
Initializing interface 'ra0' conf '/etc/wpa_supplicant/wpa_supplicant.conf' driver 'wext' ctrl_interface 'N/A' bridge 'N/A'
Configuration file '/etc/wpa_supplicant/wpa_supplicant.conf' -> '/etc/wpa_supplicant/wpa_supplicant.conf'
Reading configuration file '/etc/wpa_supplicant/wpa_supplicant.conf'
ctrl_interface='/var/run/wpa_supplicant'
ctrl_interface_group='wheel'
Priority group 0
id=0 ssid='MYSSID'
Killed

# dmesg
dmesg
[ 437.045139] rtusb init rt2870 --->
[ 437.045200] usbcore: registered new interface driver rt2870
[ 451.612657] usb 1-11: new high-speed USB device number 4 using xhci_hcd
[ 451.756926] usb 1-11: New USB device found, idVendor=148f, idProduct=761a
[ 451.756933] usb 1-11: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 451.756936] usb 1-11: Product: WiFi
[ 451.756938] usb 1-11: Manufacturer: MediaTek
[ 451.756940] usb 1-11: SerialNumber: 1.0
[ 451.758017]

=== pAd = ffffc90003831000, size = 895280 ===

[ 451.758140] <-- RTMPAllocTxRxRingMemory, Status=0
[ 451.758355] <-- RTMPAllocAdapterBlock, Status=0
[ 451.758475] ==>RT65xx_WLAN_ChipOnOff(): OnOff:1, Reset= 0, pAd->WlanFunCtrl:0x0, Reg-WlanFunCtrl=0xff000002
[ 451.759047] MCUType = 2
[ 451.759171] NVM is EFUSE
[ 451.759173] Endpoint(8) is for In-band Command
[ 451.759175] Endpoint(4) is for WMM0 AC0
[ 451.759176] Endpoint(5) is for WMM0 AC1
[ 451.759177] Endpoint(6) is for WMM0 AC2
[ 451.759178] Endpoint(7) is for WMM0 AC3
[ 451.759179] Endpoint(9) is for WMM1 AC0
[ 451.759180] Endpoint(84) is for Data-In
[ 451.759181] Endpoint(85) is for Command Rsp
[ 460.646087] -->RTUSBVenderReset
[ 460.646177] <--RTUSBVenderReset
[ 460.651140] fw version:0.1.00 build:7640
[ 460.651141] build time:201308221655____
[ 460.651141] ilm length = 68780(bytes)
[ 460.651142] dlm length = 11476(bytes)
[ 460.724638] #
[ 460.730662] loading fw......
[ 460.840598] #
[ 461.050956] RTMP_TimerListAdd: add timer obj ffffc900038b2250!
[ 461.050956] RTMP_TimerListAdd: add timer obj ffffc900038b22c8!
[ 461.050957] RTMP_TimerListAdd: add timer obj ffffc900038b2340!
[ 461.050957] RTMP_TimerListAdd: add timer obj ffffc900038b21d8!
[ 461.050958] RTMP_TimerListAdd: add timer obj ffffc900038b2070!
[ 461.050958] RTMP_TimerListAdd: add timer obj ffffc900038b20e8!
[ 461.050958] RTMP_TimerListAdd: add timer obj ffffc90003844d48!
[ 461.050959] RTMP_TimerListAdd: add timer obj ffffc90003833b80!
[ 461.050959] RTMP_TimerListAdd: add timer obj ffffc90003833c00!
[ 461.050959] RTMP_TimerListAdd: add timer obj ffffc90003844ed0!
[ 461.050960] RTMP_TimerListAdd: add timer obj ffffc90003844c58!
[ 461.050960] RTMP_TimerListAdd: add timer obj ffffc90003844e58!
[ 461.052723] cfg_mode=5
[ 461.052724] wmode_band_equal(): Band Not Equal!
[ 461.052818] Key1Str is Invalid key length(0) or Type(0)
[ 461.052825] Key2Str is Invalid key length(0) or Type(0)
[ 461.052831] Key3Str is Invalid key length(0) or Type(0)
[ 461.052851] Key4Str is Invalid key length(0) or Type(0)
[ 461.053017] 1. Phy Mode = 31
[ 461.053017] 2. Phy Mode = 31
[ 461.053017] NVM is Efuse and its size =1d[1e0-1fc]
[ 461.062111] ERROR!!! E2PROM: WRONG VERSION 0x2, should be 1
[ 461.063708] mt76x0_read_tx_alc_info_from_eeprom: EEPROM_MT76x0_TEMPERATURE_OFFSET (0xD1) = 0xf8
[ 461.063708] mt76x0_read_tx_alc_info_from_eeprom: TemperatureOffset = 0xfffffff8
[ 461.063708] Temperature Tx ALC not enabled
[ 461.069320] 3. Phy Mode = 31
[ 461.069321] AntCfgInit: primary/secondary ant 0/1
[ 461.074116] RTMPSetPhyMode: channel is out of range, use first channel=1
[ 461.074871] MCS Set = ff 00 00 00 01
[ 461.084819] <==== rt28xx_init, Status=0
[ 461.085260] 0x1300 = 00064300
[ 461.085260] RTMPDrvSTAOpen(1):Check if PDMA is idle!
[ 461.085301] RTMPDrvSTAOpen(2):Check if PDMA is idle!
[ 461.285862] userif-3: sent link down event.
[ 461.285867] userif-3: sent link up event.
ajie@linux-j6fj:/home/data/share/tplink_archer_t2u/mt7610u_wifi_sta_v3002_dpo_20130916_linux-4.10> dmesg
[ 437.045139] rtusb init rt2870 --->
[ 437.045200] usbcore: registered new interface driver rt2870
[ 451.612657] usb 1-11: new high-speed USB device number 4 using xhci_hcd
[ 451.756926] usb 1-11: New USB device found, idVendor=148f, idProduct=761a
[ 451.756933] usb 1-11: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 451.756936] usb 1-11: Product: WiFi
[ 451.756938] usb 1-11: Manufacturer: MediaTek
[ 451.756940] usb 1-11: SerialNumber: 1.0
[ 451.758017]

=== pAd = ffffc90003831000, size = 895280 ===

[ 451.758140] <-- RTMPAllocTxRxRingMemory, Status=0
[ 451.758355] <-- RTMPAllocAdapterBlock, Status=0
[ 451.758475] ==>RT65xx_WLAN_ChipOnOff(): OnOff:1, Reset= 0, pAd->WlanFunCtrl:0x0, Reg-WlanFunCtrl=0xff000002
[ 451.759047] MCUType = 2
[ 451.759171] NVM is EFUSE
[ 451.759173] Endpoint(8) is for In-band Command
[ 451.759175] Endpoint(4) is for WMM0 AC0
[ 451.759176] Endpoint(5) is for WMM0 AC1
[ 451.759177] Endpoint(6) is for WMM0 AC2
[ 451.759178] Endpoint(7) is for WMM0 AC3
[ 451.759179] Endpoint(9) is for WMM1 AC0
[ 451.759180] Endpoint(84) is for Data-In
[ 451.759181] Endpoint(85) is for Command Rsp
[ 460.646087] -->RTUSBVenderReset
[ 460.646177] <--RTUSBVenderReset
[ 460.651140] fw version:0.1.00 build:7640
[ 460.651141] build time:201308221655____
[ 460.651141] ilm length = 68780(bytes)
[ 460.651142] dlm length = 11476(bytes)
[ 460.724638] #
[ 460.730662] loading fw......
[ 460.840598] #
[ 461.050956] RTMP_TimerListAdd: add timer obj ffffc900038b2250!
[ 461.050956] RTMP_TimerListAdd: add timer obj ffffc900038b22c8!
[ 461.050957] RTMP_TimerListAdd: add timer obj ffffc900038b2340!
[ 461.050957] RTMP_TimerListAdd: add timer obj ffffc900038b21d8!
[ 461.050958] RTMP_TimerListAdd: add timer obj ffffc900038b2070!
[ 461.050958] RTMP_TimerListAdd: add timer obj ffffc900038b20e8!
[ 461.050958] RTMP_TimerListAdd: add timer obj ffffc90003844d48!
[ 461.050959] RTMP_TimerListAdd: add timer obj ffffc90003833b80!
[ 461.050959] RTMP_TimerListAdd: add timer obj ffffc90003833c00!
[ 461.050959] RTMP_TimerListAdd: add timer obj ffffc90003844ed0!
[ 461.050960] RTMP_TimerListAdd: add timer obj ffffc90003844c58!
[ 461.050960] RTMP_TimerListAdd: add timer obj ffffc90003844e58!
[ 461.052723] cfg_mode=5
[ 461.052724] wmode_band_equal(): Band Not Equal!
[ 461.052818] Key1Str is Invalid key length(0) or Type(0)
[ 461.052825] Key2Str is Invalid key length(0) or Type(0)
[ 461.052831] Key3Str is Invalid key length(0) or Type(0)
[ 461.052851] Key4Str is Invalid key length(0) or Type(0)
[ 461.053017] 1. Phy Mode = 31
[ 461.053017] 2. Phy Mode = 31
[ 461.053017] NVM is Efuse and its size =1d[1e0-1fc]
[ 461.062111] ERROR!!! E2PROM: WRONG VERSION 0x2, should be 1
[ 461.063708] mt76x0_read_tx_alc_info_from_eeprom: EEPROM_MT76x0_TEMPERATURE_OFFSET (0xD1) = 0xf8
[ 461.063708] mt76x0_read_tx_alc_info_from_eeprom: TemperatureOffset = 0xfffffff8
[ 461.063708] Temperature Tx ALC not enabled
[ 461.069320] 3. Phy Mode = 31
[ 461.069321] AntCfgInit: primary/secondary ant 0/1
[ 461.074116] RTMPSetPhyMode: channel is out of range, use first channel=1
[ 461.074871] MCS Set = ff 00 00 00 01
[ 461.084819] <==== rt28xx_init, Status=0
[ 461.085260] 0x1300 = 00064300
[ 461.085260] RTMPDrvSTAOpen(1):Check if PDMA is idle!
[ 461.085301] RTMPDrvSTAOpen(2):Check if PDMA is idle!
[ 461.285862] userif-3: sent link down event.
[ 461.285867] userif-3: sent link up event.
[ 666.838231] BUG: unable to handle kernel paging request at 00007ffe16ac3190
[ 666.838234] IP: [] rt_ioctl_siwpmksa+0x85/0x130 [mt7650u_sta]
[ 666.838244] PGD 437408067 PUD 41587e067 PMD 450b88067 PTE 80000003c32d6867
[ 666.838246] Oops: 0001 [#1] SMP
[ 666.838247] Modules linked in: mt7650u_sta(O) ip6table_filter ip6_tables iptable_filter ip_tables x_tables vmnet(O) ppdev parport_pc parport bnep vmw_vsock_vmci_transport vsock vmw_vmci vmmon(O) tun af_packet nvidia_modeset(PO) vboxpci(O) vboxnetadp(O) vboxnetflt(O) vboxdrv(O) iscsi_ibft iscsi_boot_sysfs msr btrfs xor snd_hda_codec_hdmi fuse intel_rapl x86_pkg_temp_thermal intel_powerclamp coretemp kvm_intel kvm irqbypass raid6_pq crct10dif_pclmul crc32_pclmul crc32c_intel joydev ghash_clmulni_intel snd_hda_codec_realtek snd_hda_codec_generic snd_hda_intel snd_hda_codec snd_hda_core snd_hwdep snd_pcm_oss snd_pcm snd_seq iTCO_wdt iTCO_vendor_support drbg ansi_cprng snd_seq_device snd_timer snd_mixer_oss aesni_intel hci_uart btbcm btqca nvidia(PO) aes_x86_64 btintel alx lrw gf128mul glue_helper i2c_i801
[ 666.838263] ablk_helper pcspkr cryptd bluetooth snd mdio battery rfkill pinctrl_sunrisepoint soundcore pinctrl_intel intel_lpss_acpi intel_lpss mfd_core mei_me mei shpchp tpm_infineon acpi_pad fjes acpi_als kfifo_buf industrialio ext4 crc16 jbd2 mbcache hid_logitech_hidpp hid_logitech_dj usbhid sr_mod cdrom sd_mod mxm_wmi ahci libahci xhci_pci xhci_hcd usbcore usb_common libata wmi video i2c_hid button fan processor thermal sg dm_multipath dm_mod scsi_dh_rdac scsi_dh_emc scsi_dh_alua scsi_mod loop autofs4
[ 666.838276] CPU: 0 PID: 4679 Comm: wpa_supplicant Tainted: P O 4.4.92-31-default #1
[ 666.838277] Hardware name: Gigabyte Technology Co., Ltd. Z170X-Gaming 3/Z170X-Gaming 3, BIOS F6 03/01/2016
[ 666.838278] task: ffff8804150ad4c0 ti: ffff880451ae4000 task.ti: ffff880451ae4000
[ 666.838278] RIP: 0010:[] [] rt_ioctl_siwpmksa+0x85/0x130 [mt7650u_sta]
[ 666.838286] RSP: 0018:ffff880451ae7cc8 EFLAGS: 00010297
[ 666.838287] RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffff8800805e6200
[ 666.838287] RDX: 0000000000005013 RSI: 0000000000000000 RDI: ffffc90003831000
[ 666.838288] RBP: 00007ffe16ac3190 R08: 0000000000000000 R09: 0000000000000000
[ 666.838289] R10: 000000000001d590 R11: 0000000000000246 R12: ffffc90003831000
[ 666.838289] R13: ffff880464088000 R14: 0000000000000000 R15: ffff88007c96e9c0
[ 666.838290] FS: 00007f4b89ed5700(0000) GS:ffff880476400000(0000) knlGS:0000000000000000
[ 666.838291] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 666.838291] CR2: 00007ffe16ac3190 CR3: 00000004641e9000 CR4: 00000000003406f0
[ 666.838292] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 666.838293] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 666.838293] Stack:
[ 666.838294] ffff8804523d6900 0000000000000000 ffffffff818c08e8 ffffffff818c08e8
[ 666.838295] ffffffff818c08e8 ffff880451ae7e30 0000000000008b36 ffffffffa17cecc0
[ 666.838296] ffffffff81617d37 ffff880464088000 ffff880400000024 ffff880464088000
[ 666.838297] Call Trace:
[ 666.838313] [] ioctl_standard_iw_point+0x157/0x3d0
[ 666.838315] [] ioctl_standard_call+0xa3/0xd0
[ 666.838317] [] wext_handle_ioctl+0x65/0xc0
[ 666.838319] [] dev_ioctl+0x2e5/0x5a0
[ 666.838322] [] sock_ioctl+0x134/0x2d0
[ 666.838325] [] do_vfs_ioctl+0x30c/0x570
[ 666.838330] [] SyS_ioctl+0x74/0x80
[ 666.838332] [] entry_SYSCALL_64_fastpath+0x16/0x71
[ 666.839128] DWARF2 unwinder stuck at entry_SYSCALL_64_fastpath+0x16/0x71

[ 666.839129] Leftover inexact backtrace:

[ 666.839130] Code: ff 89 d8 5b 5d 41 5c 41 5d c3 48 85 ed 0f 84 8f 00 00 00 48 83 3d 93 39 05 00 02 76 0e 48 83 3d 31 bc 07 00 00 0f 84 93 00 00 00 <8b> 45 00 83 f8 03 74 5b 83 f8 02 74 60 83 f8 01 0f 94 c0 0f b6
[ 666.839143] RIP [] rt_ioctl_siwpmksa+0x85/0x130 [mt7650u_sta]
[ 666.839150] RSP
[ 666.839150] CR2: 00007ffe16ac3190
[ 666.839152] ---[ end trace 5e5c2dca924e8b7b ]---
[ 666.839153] BUG: sleeping function called from invalid context at ../include/linux/sched.h:2901
[ 666.839154] in_atomic(): 0, irqs_disabled(): 1, pid: 4679, name: wpa_supplicant
[ 666.839155] CPU: 0 PID: 4679 Comm: wpa_supplicant Tainted: P D O 4.4.92-31-default #1
[ 666.839155] Hardware name: Gigabyte Technology Co., Ltd. Z170X-Gaming 3/Z170X-Gaming 3, BIOS F6 03/01/2016
[ 666.839156] 0000000000000000 ffffffff8133a1b7 ffff8804150ad4c0 0000000000001247
[ 666.839157] ffffffff8108fd31 0000000000000046 0000000000000009 0000000000001247
[ 666.839159] ffffffff81083121 ffffffff00000000 0000000000000010 ffff880451ae7b08
[ 666.839160] Call Trace:
[ 666.839164] [] dump_trace+0x59/0x320
[ 666.839165] [] show_stack_log_lvl+0xfa/0x180
[ 666.839167] [] show_stack+0x21/0x40
[ 666.839169] [] dump_stack+0x5c/0x85
[ 666.839172] [] exit_signals+0x21/0x130
[ 666.839174] [] do_exit+0xb1/0xb60
[ 666.839176] [] oops_end+0x9c/0xd0
[ 666.839178] [] no_context+0x107/0x370
[ 666.839180] [] __do_page_fault+0x7f/0x4e0
[ 666.839181] [] do_page_fault+0x2b/0x70
[ 666.839183] [] page_fault+0x28/0x30
[ 666.839977] DWARF2 unwinder stuck at page_fault+0x28/0x30

[ 666.839978] Leftover inexact backtrace:

[ 666.839985] [] ? rt_ioctl_siwpmksa+0x85/0x130 [mt7650u_sta]
[ 666.839990] [] ? rt_ioctl_siwpmksa+0x34/0x130 [mt7650u_sta]
[ 666.839995] [] ? rt_ioctl_siwencodeext+0x190/0x190 [mt7650u_sta]
[ 666.839997] [] ? ioctl_standard_iw_point+0x157/0x3d0
[ 666.839998] [] ? terminate_walk+0x5e/0xc0
[ 666.839999] [] ? path_openat+0x2e9/0x12e0
[ 666.840000] [] ? ioctl_standard_call+0xa3/0xd0
[ 666.840001] [] ? wext_handle_ioctl+0x65/0xc0
[ 666.840003] [] ? dev_ioctl+0x2e5/0x5a0
[ 666.840004] [] ? sock_ioctl+0x134/0x2d0
[ 666.840005] [] ? do_vfs_ioctl+0x30c/0x570
[ 666.840007] [] ? rw_verify_area+0x49/0xc0
[ 666.840008] [] ? vfs_read+0x7a/0x120
[ 666.840009] [] ? SyS_ioctl+0x74/0x80
[ 666.840010] [] ? entry_SYSCALL_64_fastpath+0x16/0x71

[/CODE]

----------------------------------------------
openSuse Leap 42.3, with branch 'linux-4.10'
----------------------------------------------

[CODE]# git checkout linux-4.10
Branch 'linux-4.10' set up to track remote branch 'linux-4.10' from 'origin'.
Switched to a new branch 'linux-4.10'
# git checkout
Your branch is up to date with 'origin/linux-4.10'.
# make
# make install
# cp RT2870STA.dat /etc/Wireless/RT2870STA/RT2870STA.dat
# modprobe mt7650u_sta
# ifconfig ra0 up
# iwpriv ra0 set NetworkType=Infra
# iwpriv ra0 set AuthMode=WPA2PSK
# iwpriv ra0 set SSID="MYSSID"
# iwpriv ra0 set WPAPSK="MYPASSWORD"
# iwpriv ra0 set WPA2PSK="MYPASSWORD"
# wpa_supplicant -Dwext -ira0 -c /etc/wpa_supplicant/wpa_supplicant.conf -d
wpa_supplicant v2.2
random: Trying to read entropy from /dev/random
Successfully initialized wpa_supplicant
Initializing interface 'ra0' conf '/etc/wpa_supplicant/wpa_supplicant.conf' driver 'wext' ctrl_interface 'N/A' bridge 'N/A'
Configuration file '/etc/wpa_supplicant/wpa_supplicant.conf' -> '/etc/wpa_supplicant/wpa_supplicant.conf'
Reading configuration file '/etc/wpa_supplicant/wpa_supplicant.conf'
ctrl_interface='/var/run/wpa_supplicant'
ctrl_interface_group='wheel'
Priority group 0
id=0 ssid='MYSSID'
Killed

# dmesg
[ 79.963582] rtusb init rt2870 --->
[ 79.963645] usbcore: registered new interface driver rt2870
[ 88.378868] usb 1-5.3: new high-speed USB device number 4 using xhci_hcd
[ 88.494920] usb 1-5.3: New USB device found, idVendor=148f, idProduct=761a
[ 88.494927] usb 1-5.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 88.494929] usb 1-5.3: Product: WiFi
[ 88.494931] usb 1-5.3: Manufacturer: MediaTek
[ 88.494933] usb 1-5.3: SerialNumber: 1.0
[ 88.495938]

=== pAd = ffffc90003851000, size = 895280 ===

[ 88.496064] <-- RTMPAllocTxRxRingMemory, Status=0
[ 88.496288] <-- RTMPAllocAdapterBlock, Status=0
[ 88.496411] ==>RT65xx_WLAN_ChipOnOff(): OnOff:1, Reset= 0, pAd->WlanFunCtrl:0x0, Reg-WlanFunCtrl=0xff000002
[ 88.497220] MCUType = 2
[ 88.497346] NVM is EFUSE
[ 88.497349] Endpoint(8) is for In-band Command
[ 88.497350] Endpoint(4) is for WMM0 AC0
[ 88.497351] Endpoint(5) is for WMM0 AC1
[ 88.497352] Endpoint(6) is for WMM0 AC2
[ 88.497353] Endpoint(7) is for WMM0 AC3
[ 88.497354] Endpoint(9) is for WMM1 AC0
[ 88.497355] Endpoint(84) is for Data-In
[ 88.497356] Endpoint(85) is for Command Rsp
[ 154.806756] -->RTUSBVenderReset
[ 154.806858] <--RTUSBVenderReset
[ 154.811828] fw version:0.1.00 build:7640
[ 154.811832] build time:201308221655____
[ 154.811833] ilm length = 68780(bytes)
[ 154.811834] dlm length = 11476(bytes)
[ 154.885080] #
[ 154.891235] loading fw......
[ 155.001069] #
[ 155.215434] RTMP_TimerListAdd: add timer obj ffffc900038d2250!
[ 155.215435] RTMP_TimerListAdd: add timer obj ffffc900038d22c8!
[ 155.215436] RTMP_TimerListAdd: add timer obj ffffc900038d2340!
[ 155.215436] RTMP_TimerListAdd: add timer obj ffffc900038d21d8!
[ 155.215437] RTMP_TimerListAdd: add timer obj ffffc900038d2070!
[ 155.215437] RTMP_TimerListAdd: add timer obj ffffc900038d20e8!
[ 155.215437] RTMP_TimerListAdd: add timer obj ffffc90003864d48!
[ 155.215437] RTMP_TimerListAdd: add timer obj ffffc90003853b80!
[ 155.215438] RTMP_TimerListAdd: add timer obj ffffc90003853c00!
[ 155.215438] RTMP_TimerListAdd: add timer obj ffffc90003864ed0!
[ 155.215439] RTMP_TimerListAdd: add timer obj ffffc90003864c58!
[ 155.215439] RTMP_TimerListAdd: add timer obj ffffc90003864e58!
[ 155.217214] cfg_mode=5
[ 155.217216] wmode_band_equal(): Band Not Equal!
[ 155.217314] Key1Str is Invalid key length(0) or Type(0)
[ 155.217335] Key2Str is Invalid key length(0) or Type(0)
[ 155.217342] Key3Str is Invalid key length(0) or Type(0)
[ 155.217349] Key4Str is Invalid key length(0) or Type(0)
[ 155.217517] 1. Phy Mode = 31
[ 155.217518] 2. Phy Mode = 31
[ 155.217519] NVM is Efuse and its size =1d[1e0-1fc]
[ 155.221859] /home/data/share/tplink_archer_t2u/mt7610u_wifi_sta_v3002_dpo_20130916_linux-4.10/os/linux/../../chips/mt76x0.c:2114 assert (pAd->TxPower[choffset].Channel == 36)failed
[ 155.225797] ERROR!!! E2PROM: WRONG VERSION 0x2, should be 1
[ 155.227457] mt76x0_read_tx_alc_info_from_eeprom: EEPROM_MT76x0_TEMPERATURE_OFFSET (0xD1) = 0xf8
[ 155.227458] mt76x0_read_tx_alc_info_from_eeprom: TemperatureOffset = 0xfffffff8
[ 155.227458] Temperature Tx ALC not enabled
[ 155.233086] 3. Phy Mode = 31
[ 155.233087] AntCfgInit: primary/secondary ant 0/1
[ 155.237627] RTMPSetPhyMode: channel is out of range, use first channel=1
[ 155.238429] MCS Set = ff 00 00 00 01
[ 155.248367] <==== rt28xx_init, Status=0
[ 155.249964] 0x1300 = 00064300
[ 155.249965] RTMPDrvSTAOpen(1):Check if PDMA is idle!
[ 155.250525] RTMPDrvSTAOpen(2):Check if PDMA is idle!
[ 155.250916] BUG: unable to handle kernel paging request at 00007ffc211f08c0
[ 155.250918] IP: [] rt_ioctl_siwpmksa+0x85/0x130 [mt7650u_sta]
[ 155.250929] PGD 4101eb067 PUD 454640067 PMD 410163067 PTE 80000003fa823867
[ 155.250931] Oops: 0001 [#1] SMP
[ 155.250932] Modules linked in: mt7650u_sta(O) ip6table_filter ip6_tables iptable_filter ip_tables x_tables bnep vmnet(O) ppdev parport_pc parport vmw_vsock_vmci_transport vsock vmw_vmci vmmon(O) tun nvidia_modeset(PO) af_packet vboxpci(O) vboxnetadp(O) vboxnetflt(O) iscsi_ibft iscsi_boot_sysfs vboxdrv(O) msr snd_hda_codec_hdmi intel_rapl x86_pkg_temp_thermal intel_powerclamp coretemp kvm_intel btrfs kvm irqbypass crct10dif_pclmul crc32_pclmul crc32c_intel fuse xor ghash_clmulni_intel snd_hda_codec_realtek snd_hda_codec_generic snd_hda_intel snd_hda_codec snd_hda_core snd_hwdep raid6_pq snd_pcm_oss drbg ansi_cprng snd_pcm snd_seq joydev hid_logitech_hidpp snd_seq_device snd_timer hci_uart btbcm btqca alx btintel iTCO_wdt snd_mixer_oss bluetooth aesni_intel iTCO_vendor_support aes_x86_64 intel_lpss_acpi
[ 155.250961] lrw rfkill gf128mul glue_helper snd ablk_helper cryptd nvidia(PO) pcspkr i2c_i801 mdio pinctrl_sunrisepoint intel_lpss battery soundcore pinctrl_intel mfd_core mei_me mei shpchp acpi_pad tpm_infineon acpi_als fjes kfifo_buf industrialio ext4 crc16 jbd2 mbcache hid_logitech_dj usbhid sr_mod cdrom sd_mod mxm_wmi xhci_pci ahci xhci_hcd libahci usbcore usb_common libata wmi video i2c_hid button fan processor thermal sg dm_multipath dm_mod scsi_dh_rdac scsi_dh_emc scsi_dh_alua scsi_mod loop autofs4
[ 155.250975] CPU: 3 PID: 3165 Comm: wpa_supplicant Tainted: P O 4.4.92-31-default #1
[ 155.250976] Hardware name: Gigabyte Technology Co., Ltd. Z170X-Gaming 3/Z170X-Gaming 3, BIOS F6 03/01/2016
[ 155.250977] task: ffff8804536c8940 ti: ffff8804647d0000 task.ti: ffff8804647d0000
[ 155.250978] RIP: 0010:[] [] rt_ioctl_siwpmksa+0x85/0x130 [mt7650u_sta]
[ 155.250986] RSP: 0018:ffff8804647d3cc8 EFLAGS: 00010297
[ 155.250986] RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffff880453125c00
[ 155.250987] RDX: 0000000000005013 RSI: 0000000000000000 RDI: ffffc90003851000
[ 155.250988] RBP: 00007ffc211f08c0 R08: 0000000000000000 R09: 0000000000000000
[ 155.250988] R10: 000000000001d590 R11: 0000000000000246 R12: ffffc90003851000
[ 155.250989] R13: ffff8804605ab000 R14: 0000000000000000 R15: ffff880452f00a40
[ 155.250990] FS: 00007f730cb71700(0000) GS:ffff880476580000(0000) knlGS:0000000000000000
[ 155.250990] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 155.250991] CR2: 00007ffc211f08c0 CR3: 0000000435361000 CR4: 00000000003406e0
[ 155.250992] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 155.250992] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 155.250993] Stack:
[ 155.250993] ffff8804526ffa00 ffffffff815ae449 ffffffff818c08e8 ffffffff818c08e8
[ 155.250995] ffffffff818c08e8 ffff8804647d3e30 0000000000008b36 ffffffffa1828ca0
[ 155.250996] ffffffff81617d37 ffff8804605ab000 ffff880400000024 ffff8804605ab000
[ 155.250997] Call Trace:
[ 155.251012] [] ioctl_standard_iw_point+0x157/0x3d0
[ 155.251015] [] ioctl_standard_call+0xa3/0xd0
[ 155.251017] [] wext_handle_ioctl+0x65/0xc0
[ 155.251019] [] dev_ioctl+0x2e5/0x5a0
[ 155.251022] [] sock_ioctl+0x134/0x2d0
[ 155.251039] [] do_vfs_ioctl+0x30c/0x570
[ 155.251044] [] SyS_ioctl+0x74/0x80
[ 155.251047] [] entry_SYSCALL_64_fastpath+0x16/0x71
[ 155.251899] DWARF2 unwinder stuck at entry_SYSCALL_64_fastpath+0x16/0x71

[ 155.251900] Leftover inexact backtrace:

[ 155.251901] Code: ff 89 d8 5b 5d 41 5c 41 5d c3 48 85 ed 0f 84 8f 00 00 00 48 83 3d b3 49 05 00 02 76 0e 48 83 3d 51 cc 07 00 00 0f 84 93 00 00 00 <8b> 45 00 83 f8 03 74 5b 83 f8 02 74 60 83 f8 01 0f 94 c0 0f b6
[ 155.251914] RIP [] rt_ioctl_siwpmksa+0x85/0x130 [mt7650u_sta]
[ 155.251922] RSP
[ 155.251923] CR2: 00007ffc211f08c0
[ 155.251924] ---[ end trace 76ad5fab4fa89b5d ]---
[ 155.251925] BUG: sleeping function called from invalid context at ../include/linux/sched.h:2901
[ 155.251926] in_atomic(): 0, irqs_disabled(): 1, pid: 3165, name: wpa_supplicant
[ 155.251927] CPU: 3 PID: 3165 Comm: wpa_supplicant Tainted: P D O 4.4.92-31-default #1
[ 155.251927] Hardware name: Gigabyte Technology Co., Ltd. Z170X-Gaming 3/Z170X-Gaming 3, BIOS F6 03/01/2016
[ 155.251928] 0000000000000000 ffffffff8133a1b7 ffff8804536c8940 0000000000000c5d
[ 155.251929] ffffffff8108fd31 0000000000000046 0000000000000009 0000000000000c5d
[ 155.251930] ffffffff81083121 ffffffff00000000 0000000000000010 ffff8804647d3b08
[ 155.251932] Call Trace:
[ 155.251935] [] dump_trace+0x59/0x320
[ 155.251937] [] show_stack_log_lvl+0xfa/0x180
[ 155.251939] [] show_stack+0x21/0x40
[ 155.251941] [] dump_stack+0x5c/0x85
[ 155.251943] [] exit_signals+0x21/0x130
[ 155.251945] [] do_exit+0xb1/0xb60
[ 155.251947] [] oops_end+0x9c/0xd0
[ 155.251949] [] no_context+0x107/0x370
[ 155.251951] [] __do_page_fault+0x7f/0x4e0
[ 155.251953] [] do_page_fault+0x2b/0x70
[ 155.251955] [] page_fault+0x28/0x30
[ 155.252748] DWARF2 unwinder stuck at page_fault+0x28/0x30

[ 155.252749] Leftover inexact backtrace:

[ 155.252757] [] ? rt_ioctl_siwpmksa+0x85/0x130 [mt7650u_sta]
[ 155.252763] [] ? rt_ioctl_siwpmksa+0x34/0x130 [mt7650u_sta]
[ 155.252764] [] ? ip_mc_up+0x39/0x70
[ 155.252770] [] ? rt_ioctl_siwencodeext+0x190/0x190 [mt7650u_sta]
[ 155.252771] [] ? ioctl_standard_iw_point+0x157/0x3d0
[ 155.252773] [] ? notifier_call_chain+0x44/0x70
[ 155.252790] [] ? ioctl_standard_call+0xa3/0xd0
[ 155.252792] [] ? wext_handle_ioctl+0x65/0xc0
[ 155.252793] [] ? dev_ioctl+0x2e5/0x5a0
[ 155.252795] [] ? sock_ioctl+0x134/0x2d0
[ 155.252796] [] ? do_vfs_ioctl+0x30c/0x570
[ 155.252797] [] ? task_work_run+0x8a/0xa0
[ 155.252801] [] ? SyS_ioctl+0x74/0x80
[ 155.252803] [] ? entry_SYSCALL_64_fastpath+0x16/0x71
[ 155.451177] userif-3: sent link down event.
[ 155.451187] userif-3: sent link up event.

If I remove the TP-Link USB, I will get a lot of error "receive cmd msg fail(-71)"
# dmesg
...
...
[ 268.159426] receive cmd msg fail(-71)
[ 268.159506] receive cmd msg fail(-71)
[ 268.159586] receive cmd msg fail(-71)
[ 268.159666] receive cmd msg fail(-71)
[ 268.159746] receive cmd msg fail(-71)
[ 268.159826] receive cmd msg fail(-71)
[ 268.159906] receive cmd msg fail(-71)
[ 268.159986] receive cmd msg fail(-71)
[ 268.160066] receive cmd msg fail(-71)
[ 268.160129] usb 1-5.3: USB disconnect, device number 4
[ 268.160146] receive cmd msg fail(-71)
[ 268.160147] usb_rx_cmd_msg_complete:submit urb fail(-19)
[ 268.160149] usb_rx_cmd_msg_submit:submit urb fail(-19)
[ 268.160201] rtusb_disconnect: unregister usbnet usb-0000:00:14.0-5.3
[ 268.160203] RtmpOSNetDevDetach(): RtmpOSNetDeviceDetach(), dev->name=ra0!
[ 268.161679] #
[ 268.166646] #
[ 268.166647] RTUSB_VendorRequest failed(-19),TxFlags=0x0, ReqType=IN, Req=0x7, Idx=0x1000,pAd->Flags=0x31080102
[ 268.166647] CMDTHREAD_RESET_BULK_IN: Cannot do bulk in because flags(0x31080102) on !
[/CODE]

------------------------------------------------------------------------
Ubuntu 16.04 (master branch, with NetworkManager)
------------------------------------------------------------------------
[CODE]
# modprobe mt7650u_sta
(hang)

# dmesg

[ 1835.149981] rtusb init rt2870 --->
[ 1835.150228] usbcore: registered new interface driver rt2870
[ 1859.017245] usb 1-5.3: new high-speed USB device number 4 using xhci_hcd
[ 1859.133219] usb 1-5.3: New USB device found, idVendor=148f, idProduct=761a
[ 1859.133227] usb 1-5.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1859.133231] usb 1-5.3: Product: WiFi
[ 1859.133235] usb 1-5.3: Manufacturer: MediaTek
[ 1859.133239] usb 1-5.3: SerialNumber: 1.0
[ 1859.134297]

=== pAd = ffffc90002ed5000, size = 895280 ===

[ 1859.134415] <-- RTMPAllocTxRxRingMemory, Status=0
[ 1859.134630] <-- RTMPAllocAdapterBlock, Status=0
[ 1859.134751] ==>RT65xx_WLAN_ChipOnOff(): OnOff:1, Reset= 0, pAd->WlanFunCtrl:0x0, Reg-WlanFunCtrl=0xff000002
[ 1859.135463] MCUType = 2
[ 1859.135591] NVM is EFUSE
[ 1859.135594] Endpoint(8) is for In-band Command
[ 1859.135597] Endpoint(4) is for WMM0 AC0
[ 1859.135600] Endpoint(5) is for WMM0 AC1
[ 1859.135602] Endpoint(6) is for WMM0 AC2
[ 1859.135604] Endpoint(7) is for WMM0 AC3
[ 1859.135606] Endpoint(9) is for WMM1 AC0
[ 1859.135609] Endpoint(84) is for Data-In
[ 1859.135611] Endpoint(85) is for Command Rsp
[ 1859.152902] cfg80211: World regulatory domain updated:
[ 1859.152904] cfg80211: DFS Master region: unset
[ 1859.152905] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 1859.152906] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 1859.152907] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 1859.152908] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[ 1859.152908] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[ 1859.152910] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[ 1859.152910] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[ 1859.152911] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[ 1859.152912] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[ 1859.671932] IPv6: ADDRCONF(NETDEV_UP): ra0: link is not ready
[ 1859.677410] -->RTUSBVenderReset
[ 1859.677490] <--RTUSBVenderReset
[ 1859.682451] fw version:0.1.00 build:7640
[ 1859.682452] build time:201308221655____
[ 1859.682455] ilm length = 68780(bytes)
[ 1859.682456] dlm length = 11476(bytes)
[ 1859.757376] #
[ 1859.764312] loading fw......
[ 1859.877329] #
[ 1860.089294] RTMP_TimerListAdd: add timer obj ffffc90002f56250!
[ 1860.089295] RTMP_TimerListAdd: add timer obj ffffc90002f562c8!
[ 1860.089296] RTMP_TimerListAdd: add timer obj ffffc90002f56340!
[ 1860.089297] RTMP_TimerListAdd: add timer obj ffffc90002f561d8!
[ 1860.089297] RTMP_TimerListAdd: add timer obj ffffc90002f56070!
[ 1860.089298] RTMP_TimerListAdd: add timer obj ffffc90002f560e8!
[ 1860.089298] RTMP_TimerListAdd: add timer obj ffffc90002ee8d48!
[ 1860.089299] RTMP_TimerListAdd: add timer obj ffffc90002ed7b80!
[ 1860.089300] RTMP_TimerListAdd: add timer obj ffffc90002ed7c00!
[ 1860.089300] RTMP_TimerListAdd: add timer obj ffffc90002ee8ed0!
[ 1860.089301] RTMP_TimerListAdd: add timer obj ffffc90002ee8c58!
[ 1860.089301] RTMP_TimerListAdd: add timer obj ffffc90002ee8e58!
[ 1860.089332] cfg_mode=5
[ 1860.089334] wmode_band_equal(): Band Not Equal!
[ 1860.089399] Key1Str is Invalid key length(0) or Type(0)
[ 1860.089405] Key2Str is Invalid key length(0) or Type(0)
[ 1860.089412] Key3Str is Invalid key length(0) or Type(0)
[ 1860.089418] Key4Str is Invalid key length(0) or Type(0)
[ 1860.089558] 1. Phy Mode = 31
[ 1860.089558] 2. Phy Mode = 31
[ 1860.089559] NVM is Efuse and its size =1d[1e0-1fc]
[ 1860.097595] ERROR!!! E2PROM: WRONG VERSION 0x2, should be 1
[ 1860.099134] mt76x0_read_tx_alc_info_from_eeprom: EEPROM_MT76x0_TEMPERATURE_OFFSET (0xD1) = 0xf8
[ 1860.099135] mt76x0_read_tx_alc_info_from_eeprom: TemperatureOffset = 0xfffffff8
[ 1860.099135] Temperature Tx ALC not enabled
[ 1860.105720] 3. Phy Mode = 31
[ 1860.105721] AntCfgInit: primary/secondary ant 0/1
[ 1860.110065] RTMPSetPhyMode: channel is out of range, use first channel=1
[ 1860.110824] MCS Set = ff 00 00 00 01
[ 1860.120777] <==== rt28xx_init, Status=0
[ 1860.121219] 0x1300 = 00064300
[ 1860.121220] RTMPDrvSTAOpen(1):Check if PDMA is idle!
[ 1860.121259] RTMPDrvSTAOpen(2):Check if PDMA is idle!
[ 1860.143374] ==>RT65xx_WLAN_ChipOnOff(): OnOff:0, Reset= 0, pAd->WlanFunCtrl:0xff000003, Reg-WlanFunCtrl=0xff000003
[ 1860.143535] receive cmd msg fail(-2)
[ 1860.143539] tx_kickout_fail_count = 0
[ 1860.143540] tx_timeout_fail_count = 0
[ 1860.143540] rx_receive_fail_count = 0
[ 1860.143541] alloc_cmd_msg = 105
[ 1860.143541] free_cmd_msg = 105
[ 1860.195701] ==>RT65xx_WLAN_ChipOnOff(): OnOff:1, Reset= 0, pAd->WlanFunCtrl:0xff000000, Reg-WlanFunCtrl=0xff000000
[ 1860.201235] -->RTUSBVenderReset
[ 1860.201299] <--RTUSBVenderReset
[ 1860.206260] fw version:0.1.00 build:7640
[ 1860.206261] build time:201308221655____
[ 1860.206264] ilm length = 68780(bytes)
[ 1860.206264] dlm length = 11476(bytes)
[ 1860.281301] #
[ 1860.287623] loading fw......
[ 1860.322153] userif-3: sent link down event.
[ 1860.322160] userif-3: sent link up event.

[ 1860.397116] #
[ 1860.608194] RTMP_TimerListAdd: add timer obj ffffc90002f56250!
[ 1860.608195] RTMP_TimerListAdd: add timer obj ffffc90002f562c8!
[ 1860.608196] RTMP_TimerListAdd: add timer obj ffffc90002f56340!
[ 1860.608197] RTMP_TimerListAdd: add timer obj ffffc90002f561d8!
[ 1860.608198] RTMP_TimerListAdd: add timer obj ffffc90002f56070!
[ 1860.608198] RTMP_TimerListAdd: add timer obj ffffc90002f560e8!
[ 1860.608199] RTMP_TimerListAdd: add timer obj ffffc90002ee8d48!
[ 1860.608199] RTMP_TimerListAdd: add timer obj ffffc90002ed7b80!
[ 1860.608200] RTMP_TimerListAdd: add timer obj ffffc90002ed7c00!
[ 1860.608200] RTMP_TimerListAdd: add timer obj ffffc90002ee8ed0!
[ 1860.608201] RTMP_TimerListAdd: add timer obj ffffc90002ee8c58!
[ 1860.608202] RTMP_TimerListAdd: add timer obj ffffc90002ee8e58!
[ 1860.608215] CfgSetCountryRegion():CountryRegion in eeprom was programmed
[ 1860.608218] CfgSetCountryRegion():CountryRegion in eeprom was programmed
[ 1860.608235] cfg_mode=5
[ 1860.608236] wmode_band_equal(): Band Not Equal!
[ 1860.608302] Key1Str is Invalid key length(0) or Type(0)
[ 1860.608308] Key2Str is Invalid key length(0) or Type(0)
[ 1860.608315] Key3Str is Invalid key length(0) or Type(0)
[ 1860.608321] Key4Str is Invalid key length(0) or Type(0)
[ 1860.608450] 1. Phy Mode = 31
[ 1860.608450] 2. Phy Mode = 31
[ 1860.608451] NVM is Efuse and its size =1d[1e0-1fc]
[ 1860.619964] ERROR!!! E2PROM: WRONG VERSION 0x2, should be 1
[ 1860.621870] mt76x0_read_tx_alc_info_from_eeprom: EEPROM_MT76x0_TEMPERATURE_OFFSET (0xD1) = 0xf8
[ 1860.621874] mt76x0_read_tx_alc_info_from_eeprom: TemperatureOffset = 0xfffffff8
[ 1860.621876] Temperature Tx ALC not enabled
[ 1860.628805] 3. Phy Mode = 31
[ 1860.628808] AntCfgInit: primary/secondary ant 0/1
[ 1860.632623] RTMPSetPhyMode: channel is out of range, use first channel=1
[ 1860.634325] MCS Set = ff 00 00 00 01
[ 1860.644269] <==== rt28xx_init, Status=0
[ 1860.644748] 0x1300 = 00064300
[ 1860.644751] RTMPDrvSTAOpen(1):Check if PDMA is idle!
[ 1860.644871] RTMPDrvSTAOpen(2):Check if PDMA is idle!
[ 1860.650041] BUG: unable to handle kernel paging request at 00007fffc5ad1460
[ 1860.650043] IP: [] rt_ioctl_siwpmksa+0x90/0x150 [mt7650u_sta]
[ 1860.650055] PGD 37fc4b067 PUD 37fc4a067 PMD 37fc46067 PTE 80000003c4905867
[ 1860.650057] Oops: 0001 [#1] SMP
[ 1860.650058] Modules linked in: cfg80211 mt7650u_sta(OE) nvram msr nfnetlink_queue nfnetlink_log nfnetlink vmnet(OE) vmw_vsock_vmci_transport vsock pci_stub vboxpci(OE) vboxnetadp(OE) vboxnetflt(OE) vmw_vmci vboxdrv(OE) vmmon(OE) snd_hrtimer bnep binfmt_misc joydev input_leds mxm_wmi snd_hda_codec_hdmi intel_rapl x86_pkg_temp_thermal intel_powerclamp coretemp kvm_intel kvm irqbypass crct10dif_pclmul crc32_pclmul ghash_clmulni_intel aesni_intel snd_hda_codec_realtek snd_hda_codec_generic aes_x86_64 i915_bpo lrw gf128mul glue_helper ablk_helper intel_ips cryptd i2c_algo_bit snd_seq_midi snd_hda_intel snd_seq_midi_event snd_hda_codec snd_hda_core snd_hwdep snd_rawmidi serio_raw snd_pcm snd_seq nvidia_uvm(POE) snd_seq_device snd_timer snd soundcore mei_me mei shpchp hci_uart btbcm btqca btintel 8250_fintek
[ 1860.650075] bluetooth wmi intel_lpss_acpi intel_lpss acpi_als mac_hid tpm_infineon kfifo_buf acpi_pad industrialio parport_pc ppdev lp parport autofs4 btrfs xor raid6_pq hid_logitech_hidpp hid_logitech_dj usbhid nvidia_drm(POE) nvidia_modeset(POE) drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops drm psmouse alx mdio nvidia(POE) ahci libahci video pinctrl_sunrisepoint i2c_hid pinctrl_intel hid fjes
[ 1860.650086] CPU: 2 PID: 6123 Comm: wpa_supplicant Tainted: P OE 4.4.0-98-generic #121-Ubuntu
[ 1860.650087] Hardware name: Gigabyte Technology Co., Ltd. Z170X-Gaming 3/Z170X-Gaming 3, BIOS F6 03/01/2016
[ 1860.650088] task: ffff8804149ae900 ti: ffff880063e9c000 task.ti: ffff880063e9c000
[ 1860.650089] RIP: 0010:[] [] rt_ioctl_siwpmksa+0x90/0x150 [mt7650u_sta]
[ 1860.650097] RSP: 0018:ffff880063e9fc58 EFLAGS: 00010297
[ 1860.650098] RAX: 0000000000000000 RBX: 00007fffc5ad1460 RCX: 0000000000000000
[ 1860.650099] RDX: 0000000000005013 RSI: 0000000000000000 RDI: ffffc90002ed5000
[ 1860.650099] RBP: ffff880063e9fca0 R08: 0000000000000000 R09: 0000000000000000
[ 1860.650100] R10: ffff8803806fe300 R11: ffffffffc152eee0 R12: 0000000000000000
[ 1860.650100] R13: ffffc90002ed5000 R14: ffff88037e6a7000 R15: ffffffffc152eee0
[ 1860.650101] FS: 00007f1b21b09880(0000) GS:ffff880476500000(0000) knlGS:0000000000000000
[ 1860.650102] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 1860.650103] CR2: 00007fffc5ad1460 CR3: 000000037e78a000 CR4: 00000000003406e0
[ 1860.650103] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 1860.650104] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 1860.650105] Stack:
[ 1860.650105] ffff880463a58578 ffffffff811f0018 ffff880465801b00 ffffffff8182a1a3
[ 1860.650106] ac9723b446a10034 ffff8803806fe300 0000000000000000 ffffffff81ad1648
[ 1860.650108] ffff880063e9fe20 ffff880063e9fd28 ffffffff8182a1d1 ffff880063e9fdd0
[ 1860.650109] Call Trace:
[ 1860.650112] [] ? __kmalloc+0x208/0x250
[ 1860.650115] [] ? ioctl_standard_iw_point+0x103/0x340
[ 1860.650116] [] ioctl_standard_iw_point+0x131/0x340
[ 1860.650118] [] ? mntput+0x24/0x40
[ 1860.650120] [] ? terminate_walk+0x64/0xd0
[ 1860.650121] [] ioctl_standard_call+0x8b/0xe0
[ 1860.650123] [] ? iw_handler_get_private+0x60/0x60
[ 1860.650124] [] ? ioctl_standard_iw_point+0x340/0x340
[ 1860.650125] [] wireless_process_ioctl+0x154/0x190
[ 1860.650127] [] wext_handle_ioctl+0x78/0xd0
[ 1860.650129] [] dev_ioctl+0x29f/0x590
[ 1860.650131] [] sock_ioctl+0x126/0x290
[ 1860.650133] [] ? security_file_permission+0xa0/0xc0
[ 1860.650134] [] do_vfs_ioctl+0x29f/0x490
[ 1860.650136] [] ? __vfs_read+0x18/0x40
[ 1860.650137] [] ? vfs_read+0x86/0x130
[ 1860.650138] [] SyS_ioctl+0x79/0x90
[ 1860.650140] [] entry_SYSCALL_64_fastpath+0x16/0x71
[ 1860.650141] Code: bc 9c ff ff ff eb 75 48 85 db 0f 84 9d 00 00 00 48 83 3d cb 37 04 00 02 41 89 c4 76 0e 48 83 3d 86 ba 06 00 00 0f 84 a3 00 00 00 <8b> 03 83 f8 03 74 69 83 f8 02 74 6d 83 f8 01 0f 94 c0 0f b6 c0
[ 1860.650154] RIP [] rt_ioctl_siwpmksa+0x90/0x150 [mt7650u_sta]
[ 1860.650162] RSP
[ 1860.650163] CR2: 00007fffc5ad1460
[ 1860.650164] ---[ end trace c680f1f1669843b1 ]---
[ 1860.845021] userif-3: sent link down event.
[ 1860.845029] userif-3: sent link up event.
[ 1861.690663] ==>RT65xx_WLAN_ChipOnOff(): OnOff:0, Reset= 0, pAd->WlanFunCtrl:0xff000003, Reg-WlanFunCtrl=0xff000003
[ 1861.690827] receive cmd msg fail(-2)
[ 1861.690832] tx_kickout_fail_count = 0
[ 1861.690833] tx_timeout_fail_count = 0
[ 1861.690833] rx_receive_fail_count = 0
[ 1861.690834] alloc_cmd_msg = 105
[ 1861.690834] free_cmd_msg = 105
[/CODE]

https://www.mediatek.com/products/broadbandWifi/mt7610u
Maybe try this?

Hi johnb_xp,

The one from https://www.mediatek.com/products/broadbandWifi/mt7610u looks worse and does not pass the compilation.

This is the output from ubuntu 16.04 (kernel 4.4)

[CODE]# make
make -C tools
make[1]: Entering directory '/home/data/share/tplink_archer_t2u/mt7610u_wifi_sta_v3002_dpo_20130916_from_mediatek/tools'
gcc -g bin2h.c -o bin2h
make[1]: Leaving directory '/home/data/share/tplink_archer_t2u/mt7610u_wifi_sta_v3002_dpo_20130916_from_mediatek/tools'
/home/data/share/tplink_archer_t2u/mt7610u_wifi_sta_v3002_dpo_20130916_from_mediatek/tools/bin2h
chipset = mt7650u
chipset = mt7630u
chipset = mt7610u
cp -f os/linux/Makefile.6 /home/data/share/tplink_archer_t2u/mt7610u_wifi_sta_v3002_dpo_20130916_from_mediatek/os/linux/Makefile
make -C /lib/modules/4.4.0-98-generic/build SUBDIRS=/home/data/share/tplink_archer_t2u/mt7610u_wifi_sta_v3002_dpo_20130916_from_mediatek/os/linux modules
make[1]: Entering directory '/usr/src/linux-headers-4.4.0-98-generic'
CC [M] /home/data/share/tplink_archer_t2u/mt7610u_wifi_sta_v3002_dpo_20130916_from_mediatek/os/linux/../../os/linux/rt_profile.o
/home/data/share/tplink_archer_t2u/mt7610u_wifi_sta_v3002_dpo_20130916_from_mediatek/os/linux/../../os/linux/rt_profile.c: In function ‘announce_802_3_packet’:
/home/data/share/tplink_archer_t2u/mt7610u_wifi_sta_v3002_dpo_20130916_from_mediatek/os/linux/../../os/linux/rt_profile.c:334:16: warning: unused variable ‘pAd’ [-Wunused-variable]
RTMP_ADAPTER *pAd = (RTMP_ADAPTER *)pAdSrc;
^
In file included from /home/data/share/tplink_archer_t2u/mt7610u_wifi_sta_v3002_dpo_20130916_from_mediatek/include/rtmp_os.h:44:0,
from /home/data/share/tplink_archer_t2u/mt7610u_wifi_sta_v3002_dpo_20130916_from_mediatek/include/rtmp_comm.h:75,
from /home/data/share/tplink_archer_t2u/mt7610u_wifi_sta_v3002_dpo_20130916_from_mediatek/include/rt_config.h:33,
from /home/data/share/tplink_archer_t2u/mt7610u_wifi_sta_v3002_dpo_20130916_from_mediatek/os/linux/../../os/linux/rt_profile.c:28:
/home/data/share/tplink_archer_t2u/mt7610u_wifi_sta_v3002_dpo_20130916_from_mediatek/os/linux/../../os/linux/rt_profile.c: In function ‘STA_MonPktSend’:
/home/data/share/tplink_archer_t2u/mt7610u_wifi_sta_v3002_dpo_20130916_from_mediatek/os/linux/../../os/linux/rt_profile.c:443:35: warning: format ‘%d’ expects argument of type ‘int’, but argument 3 has type ‘long unsigned int’ [-Wformat=]
DBGPRINT(RT_DEBUG_ERROR, ("%s : Size is too large! (%d)\n", __FUNCTION__, pRxBlk->DataSize + sizeof(wlan_ng_prism2_header
^
/home/data/share/tplink_archer_t2u/mt7610u_wifi_sta_v3002_dpo_20130916_from_mediatek/include/os/rt_linux.h:660:16: note: in definition of macro ‘DBGPRINT_RAW’
printk Fmt; \
^
/home/data/share/tplink_archer_t2u/mt7610u_wifi_sta_v3002_dpo_20130916_from_mediatek/os/linux/../../os/linux/rt_profile.c:443:9: note: in expansion of macro ‘DBGPRINT’
DBGPRINT(RT_DEBUG_ERROR, ("%s : Size is too large! (%d)\n", __FUNCTION__, pRxBlk->DataSize + sizeof(wlan_ng_prism2_header
^
CC [M] /home/data/share/tplink_archer_t2u/mt7610u_wifi_sta_v3002_dpo_20130916_from_mediatek/os/linux/../../sta/assoc.o
CC [M] /home/data/share/tplink_archer_t2u/mt7610u_wifi_sta_v3002_dpo_20130916_from_mediatek/os/linux/../../sta/auth.o
CC [M] /home/data/share/tplink_archer_t2u/mt7610u_wifi_sta_v3002_dpo_20130916_from_mediatek/os/linux/../../sta/auth_rsp.o
CC [M] /home/data/share/tplink_archer_t2u/mt7610u_wifi_sta_v3002_dpo_20130916_from_mediatek/os/linux/../../sta/sync.o
CC [M] /home/data/share/tplink_archer_t2u/mt7610u_wifi_sta_v3002_dpo_20130916_from_mediatek/os/linux/../../sta/sanity.o
CC [M] /home/data/share/tplink_archer_t2u/mt7610u_wifi_sta_v3002_dpo_20130916_from_mediatek/os/linux/../../sta/rtmp_data.o
CC [M] /home/data/share/tplink_archer_t2u/mt7610u_wifi_sta_v3002_dpo_20130916_from_mediatek/os/linux/../../sta/connect.o
CC [M] /home/data/share/tplink_archer_t2u/mt7610u_wifi_sta_v3002_dpo_20130916_from_mediatek/os/linux/../../sta/wpa.o
CC [M] /home/data/share/tplink_archer_t2u/mt7610u_wifi_sta_v3002_dpo_20130916_from_mediatek/os/linux/../../sta/sta_cfg.o
/home/data/share/tplink_archer_t2u/mt7610u_wifi_sta_v3002_dpo_20130916_from_mediatek/os/linux/../../sta/sta_cfg.c: In function ‘RTMPIoctlShow’:
/home/data/share/tplink_archer_t2u/mt7610u_wifi_sta_v3002_dpo_20130916_from_mediatek/os/linux/../../sta/sta_cfg.c:5401:85: error: macro "__DATE__" might prevent reproducible builds [-Werror=date-time]
snprintf(extra, size, "Driver version-%s, %s %s\n", STA_DRIVER_VERSION, __DATE__, __TIME__ );
^
/home/data/share/tplink_archer_t2u/mt7610u_wifi_sta_v3002_dpo_20130916_from_mediatek/os/linux/../../sta/sta_cfg.c:5401:95: error: macro "__TIME__" might prevent reproducible builds [-Werror=date-time]
snprintf(extra, size, "Driver version-%s, %s %s\n", STA_DRIVER_VERSION, __DATE__, __TIME__ );
^
cc1: some warnings being treated as errors
scripts/Makefile.build:258: recipe for target '/home/data/share/tplink_archer_t2u/mt7610u_wifi_sta_v3002_dpo_20130916_from_mediatek/os/linux/../../sta/sta_cfg.o' failed
make[2]: *** [/home/data/share/tplink_archer_t2u/mt7610u_wifi_sta_v3002_dpo_20130916_from_mediatek/os/linux/../../sta/sta_cfg.o] Error 1
Makefile:1423: recipe for target '_module_/home/data/share/tplink_archer_t2u/mt7610u_wifi_sta_v3002_dpo_20130916_from_mediatek/os/linux' failed
make[1]: *** [_module_/home/data/share/tplink_archer_t2u/mt7610u_wifi_sta_v3002_dpo_20130916_from_mediatek/os/linux] Error 2
make[1]: Leaving directory '/usr/src/linux-headers-4.4.0-98-generic'
Makefile:393: recipe for target 'LINUX' failed
make: *** [LINUX] Error 2

[/CODE]