TL-PA9020 (EU) V 1.0 - Powerline failure

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

TL-PA9020 (EU) V 1.0 - Powerline failure

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
TL-PA9020 (EU) V 1.0 - Powerline failure
TL-PA9020 (EU) V 1.0 - Powerline failure
2018-01-17 07:52:49
Model : TL-PA9020P

Hardware Version : 1.0

Firmware Version : 3.2.4._902111_170118_901

ISP :

Hi,

I upgraded my powerline network from 2 TL-PA 8030 (worked with no failure for years) to 4 TL-PA9020P, which worked fine for the first 3 weeks, but now I face a lot of powerline network failures.
I changed nothing on my powerlines nor on the router settings.

Firmware on all 4 devices: 3.2.4._902111_170118_901

Any ideas?
  0      
  0      
#1
Options
6 Reply
Re:TL-PA9020 (EU) V 1.0 - Powerline failure
2018-01-18 23:17:24
Okay, so far no ideas at all as I see...
Disappointing.

What else beside new pairing of the devices could be done to ensure stable powerline connection?

What are the differences between Hardware version 1.0 to 3.0?
  0  
  0  
#2
Options
Re:TL-PA9020 (EU) V 1.0 - Powerline failure
2018-02-01 20:06:56
i am experiencing exactly the same issues since moving to 3 x TL-PA9020P. I have noticed that the failure always appears to come from the adapter that my router is plugged into. This issue occurs every few days (each week of so), requiring the powerline adapter switching off and on in order to reset and cure. Firmware is 3.2.4._902111_170628_901.
  0  
  0  
#3
Options
Re:TL-PA9020 (EU) V 1.0 - Powerline failure
2018-02-02 18:12:59
same disconnection problem. 2 x TL-PA9020(EU), 1 x TL-PA9020(EU) 1 x TL WPA9610(EU) This issue occurs every few days (each week of so), requiring the powerline adapter switching off and on in order to reset and cure.

Firmware's :
TL PA9020(EU) v1 3.2.4_902011_170703_903
TL PA9020P(EU) v1 3.2.4_902111_170118_901
TL PA9020P(EU) v1 3.2.4_902111_170118_901
TL WPA9610(EU) v1 3.2.4_961011_161105_903
  0  
  0  
#4
Options
Re:TL-PA9020 (EU) V 1.0 - Powerline failure
2018-02-03 18:28:28
Same here too, middle led is stable red or flashes red when status disconnected/connect failure accurs...every 1-3 weeks or so...only power reset helps...this came with latest firmware as i can remember...read older threads here on board...no one has contact to TP-Link support?? very disappointing situation, because these are the fastest powerline adapters i know...
  0  
  0  
#5
Options
Re:TL-PA9020 (EU) V 1.0 - Powerline failure
2018-02-03 18:37:23
@carlitos: Latest firmware for 9020P V1 EU is: TL-PA9020P KIT(EU)_V1_170628 (3.2.4_902011_170628)...No one has newer one? from "other countries" perhaps? really annoying failure...
  0  
  0  
#6
Options
Re:TL-PA9020 (EU) V 1.0 - Powerline failure
2018-02-04 20:33:28
In parallel to the Forum I contacted via email the TP-Link Technical Support something like two weeks ago.
As I never reveived any answer I asume they are still caught in a Problem solving Brainstorming Meeting.
  0  
  0  
#7
Options

Information

Helpful: 0

Views: 1112

Replies: 6

Related Articles