Powerline randomly disconnects
Hardware Version :
Firmware Version :
ISP :
i have bought 2 av500 powerline adapter( model no. TL-PA411KIT).
i've tried to switch socket and switch the two adapters but nothing
what can i do?
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Try a firmware update first.
- Copy Link
- Report Inappropriate Content
I have spent many months trying to get my TP-LINK homeplugs to work reliably, and every time I thought I had solved it with every connected device working perfectly, suddenly one or other of them would disconnect and I'd go through the ritual of re-pairing each adapter. I also bought a few replacement homeplugs, also TP-LINK, in case there was a fault on the ones I had!
As at today, I'm trying a new solution and I'm optimistic. Certainly worth a try if you're having this problem. I use a Sky broadband router. It acts as a DHCP server, allocating IP addresses. My theory is that my disconnections happen when there is a conflict of IP addresses. So the remedy I am trying is to "reserve" specific IP addresses for the devices that are connected to Homeplugs. It's quite easy to find the page in your router setup that shows a list of connected devices and their current IP addresses, and there should be an option somewhere of reserving them to that device. Can't do any harm.
Jon
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
@Twinlee I have still experienced the occasional random disconnection that requires me to switch off the powerline adapter at the socket and switch it on again. That usually seems to work. Among the measures I have tried are: allocating the IP addresses to each item, disabling power-saving on the adapter itself and within the computer itself, ie the power saving settings for the ethernet adapter, downgrading to a lower specified TP-link powerline adapter in case the higher specified ones were more likely to disconnect, and disabling sleep mode on the computer that uses the powerline adapter. And I no longer "pair" the adapters securely - I reset them all to factory configuration and plugged them in without pairing them to each other.
If I thought that Netgear adapters were more stable I'd happily throw all the TP-link ones in the bin and start again. I suppose the problem might be some quirk in the wiring of my house, a hypothesis that it would be impossible to prove or disprove.
- Copy Link
- Report Inappropriate Content
@Jon_G I'm having the same issue. At least once every 24 hours the powerline network needs to be rebooted. I have to just switch off the extender at the plug and then switch back on. I have gone through every troubleshooting option with the TP link people, (re-pair, upgrade firmware, change rooms, etc etc) but nothing. Also it appears to be pretty random. I really don't know what it is; it's not a huge problem as I just have to re-start at the plug. But it is irritating.
- Copy Link
- Report Inappropriate Content
The only way I've managed to sort this problem with Homeplugs is to set up a PING to the router from one of my PC's that pass through the homeplug connections.
For example, from my windows system, in Startup folder I made the following shortcut:-
c:\windows\system32\PING.EXE 192.168.0.1 -t (sets up a constant 1s ping to the router (check your routers gateway IP), this does not put any strain on your system or network)
Start Minimized (stops it popping up when the computer boots up and keeps it running in the bottom task bar.)
This has 100% cured my problem, and I always set this up on other peoples networks where homeplugs have been needed to be installed, and it also stops any problems for them as well.
Power Save mode has NOTHING to do with this issue, although I always disable this feature to remove any possible outages it could possible cause.
- Copy Link
- Report Inappropriate Content
@Lorenzo123 Same issue here. Have an AV600 which works fine when it's on but is disconnects every 1 to 2 days without fail. Total joke. Been like it for 18 months from new. TP-Link must surely know of this issue but for some reason seem unable or unwilling to fix it.
- Copy Link
- Report Inappropriate Content
@WBCS-Neo If you set up a constant ping to the router, doesn't that mean that your computer has to always be up and running for the continous ping to be enabled?
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 83890
Replies: 10
Voters 0
No one has voted for it yet.