Model :

Hardware Version :

Firmware Version :

ISP :

I just bought an Archer C2 router, as I noticed that it was not connected as 192.168.0.1 and it only did it when it was connected to a network by WAN I decided to press reset, 10 seconds later the router is partially blocked. Something that had never happened to me before, the most common is that the LAN ports do not work, but the GIGALAN works correctly as SWITCH, you can not access the router or WIFI.
I contacted the sellers, and to my surprise 17hs later they contacted me by phone to ask if I had flashed the router, I answered that my intention was to update the equipment but I had no chance. They decided to replace the equipment.

My question is whether this is something that happens with all C2 archers or is it just a random error.







I tried the 30/30/30 reset, but nothing.