tl wa830 re

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

tl wa830 re

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
tl wa830 re
tl wa830 re
2012-11-07 16:32:13
Region : Indonesia

Model : TL-WA830RE

Hardware Version : V1

Firmware Version :

ISP :


Dear Admin

i have problem with wa830 connection down after 15minutes

the condition:
adsl+belkin wifi at second floor, wa830 at 3rd floor, client at 4rd floor.client can browsing, but after 15 minutes connection down. then after several time like this connection error " limited or no connectivity" OS= windows xp.
but i don't use wa830 and move client at 3rd floor,connection directly to belkin, no problem
ip Belkin 192.168.2.1 with range 192.168.2.120-140
ip wa830 192.168.2.127 with range 192.168.2.120-140, dhcp disable
please assist
thank you
  0      
  0      
#1
Options
9 Reply
Re:tl wa830 re
2012-11-07 16:54:56
Maybe you can have a try to set a solid channel like 6 or 11 on your root router and try to reconfigure the wa830 according to the FAQ357on their website. Good luck !
  0  
  0  
#2
Options
Re:tl wa830 re
2012-11-08 08:02:32
Does wa830 work properly on your 3rd floor? Normally, to ensure a stable connection, you'd better not put a client device after a range extender.
  0  
  0  
#3
Options
Re:tl wa830 re
2012-11-15 20:36:27
when i turn on all device (wa830, laptop) the connection is normal, but after 15 minutes, the laptop disconnect and then connect again (like renew ip), but after several time like this, laptop error no connectivity, i have turn off / reset laptop, but not working, if i reset the router at 2nd floor, everthing normal again.
vivian i have try at 3rd floor but the error still same
could you give me advise
  0  
  0  
#4
Options
Re:tl wa830 re
2012-11-16 08:29:04
When the laptop disconnects, you may try to access internet with a network cable to wa830.
" if i reset the router at 2nd floor, everthing normal again." Your belkin router? Restart or reset? If manually disconnect your wireless connection and reconnect, is it working?
It seems connection between your router and wa830 is unstable, you may try different channels on your root router, of if possible, upgrade firmware for your router.
Sometimes, to reset and reconfigure wa830 is a good try.
  0  
  0  
#5
Options
Re:tl wa830 re
2012-12-19 17:50:30
hi guys ...
i have the same problem .... i was searching on the internet a solution and i came here.

i have a "Thomson TG784n" as a internet router on the 1st floor ... and i have on the 3rd floor the TP-LINK WA830RE working as range extender ... witch is connected to the laptop by cable ...
and the internet connection goes down every 15 minuts...it stays down for about 1 or 2 minuts and it reconects again by it self ... this hapens a few times ... and then it loses connection for good...i have to restart the range extender and some times the laptop also and all comes to life again.

can somebody give me a sugestion for this problem ?
  0  
  0  
#6
Options
crap
2014-02-21 02:06:32
I have registered in TPlink forum just for this.

TO TELL TPLINK THAT THIS HARDWARE -----> WA830RE V2 IS THE BIGGEST CRAP I EVER SEEN.


tried with WDS, without wds, with a TPLINK router and an Asus, both had the same problems! would go crash after a day or so.

only solution was to flash an unofficial firmware to make it work! THIS IS NO SOLUTION! i bought 4 of this and none worked decently.
  0  
  0  
#7
Options
Re:tl wa830 re
2014-03-07 22:03:47

fotodamaris wrote

dont waist your time you have nothing to tell TL, log into Polland TL forum using Chrome (for the translation) here http://tplink-forum.pl/index.php and scroll down to alterantive FW, click Gargoyle and look for your file 830RE V2 flash your 830, as Jimasek posted, After installation you have to choose English language in main menu., that piece of crap as you call will become the best router, repeater, you have ever had, once there
Gargoyle Defaults
IP Address:192.168.1.1
Password password
User root
What do you have to lose at this time.


Can you please give a direct link to that ?? Have searched but not found anything.
Thank you
  0  
  0  
#9
Options
Do not use Gargoyle!
2014-10-09 05:40:30
I followed the recommendation to install Gargoyle. Now the RE doesn't work at all. It is not possible to log in or even reset it to factory firmware or other settings. It is now completely useless!
  0  
  0  
#11
Options
Re:tl wa830 re
2014-10-13 23:18:38

fotodamaris wrote

Before you flash a router you have to read at their forum tutorials if you flashed the correct file, it is possible to log into interface and is possible to go back to stock FW, post your issue at gargoyle forum, general discussion section, router model and version, the whole name file you flashed, log with same user name to identify you.


Thanks but this is the second TP Link wireless RE I have had and they are just unstable - they work for a while then stop and I waste hours getting them to work again only for them to stop working again the next day. I should not need to flash the router - it should be supplied with proper firmware in the first place. I have ordered a competitor product and hope that will be more stable.
  0  
  0  
#13
Options

Information

Helpful: 0

Views: 1302

Replies: 9

Related Articles