openvpn client on archer mr200 v3 eu

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

openvpn client on archer mr200 v3 eu

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
openvpn client on archer mr200 v3 eu
openvpn client on archer mr200 v3 eu
2019-01-09 20:02:13

I have seen that this excellent 4g router has the possibility to an OPENVPN server. But this is a functionality which is totally useless because no provider of 4G LTE provides an public ip(unless you pay a premium but this is a rare exemption in Italy where I live).

 

A more critical functionality would to have a fully working openvpn client, this will increase the value of this router because then you can use OPENVPN to access to devices behind the router even if there is no pubblic ip address. 

 

As the protocoll is already there activating the client for openvpn should be a piece of cake. Can we add this feature to the next firmware release of this excellent product ?

 

Best Regards

 

Alan 

  4      
  4      
#1
Options
6 Reply
Re:openvpn client on archer mr200 v3 eu
2019-11-22 18:10:05

I would need this feature as well. At the moment I'm using a second router with dd-wrt which connects to my openvpn as a client. Not a long term solution though...

@alanbridgestone maybe this workaround could also be an alternative for you. 

  0  
  0  
#2
Options
Re:openvpn client on archer mr200 v3 eu
2019-12-30 13:39:45

@kkris9 I have the same setup but it is a waste :)

kkris9 wrote

I would need this feature as well. At the moment I'm using a second router with dd-wrt which connects to my openvpn as a client. Not a long term solution though...

@alanbridgestone maybe this workaround could also be an alternative for you. 

 

  0  
  0  
#3
Options
Re:openvpn client on archer mr200 v3 eu
2020-01-13 14:35:11

@alanbridgestone 

I'm also interested in it to manage my coutry house remotelly... I have an archer mr200 v2 EU

  1  
  1  
#4
Options
Re:openvpn client on archer mr200 v3 eu
2020-01-13 16:01:26 - last edited 2020-01-13 16:06:58

@alanbridgestone 

 

If you are on Three UK (sorry noticed you were in Italy).

 

Change the APN from three.co.uk to 3internet

 

This gets you a public IP address.

 

I only quickly read your initial post but I noticed it was one of your issues.

  0  
  0  
#5
Options
Re:openvpn client on archer mr200 v3 eu
2020-01-29 21:13:53

Why you are not using Dynamic DNS? The noip is free (need to be confirmed every 30 days) and supported by mr200. Same for mr400 and mr6400. Full information available on faq of mr200 and also on YouTube. It's very easy.

  0  
  0  
#6
Options
Re:openvpn client on archer mr200 v3 eu
2020-01-30 06:57:17
  0  
  0  
#7
Options