Problem archer c1200 LAN
Hello, I have a tp link Archer c1200 v.2.0
For internet the connection goes very well but in the multimedia aspect I have a problem.
They are gigalan ports and my equipment is gigalan but when I see a movie through the network, it cuts and loads buffer to continue.
Before I had another router with gigalan ports and this did not happen. I have changed these days between the two routers and the old one works great but the archer c1200 can not with the multimedia files.
Do you know if there is any speed limitation or that it may be causing this?
Thank you
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Did you test the speed with C1200? What's the difference between it and old router?
If you did not set any QoS or bandwidth control, it should limit the speed.
Do you watch Netflix or Youtube?
- Copy Link
- Report Inappropriate Content
Hello, the speed of the internet works well, it is the content shared through the Lan network, they are video files.
- Copy Link
- Report Inappropriate Content
What's the firmware version of your router?
How do you share files? Do you use USB drive?
- Copy Link
- Report Inappropriate Content
I do not know what version of the firm it is, the multimedia content is through a network PC.
The content is through LAN. the strange thing is that with an old router the multimedia files go smoothly and with this tplink every 3 minutes you have to load buffer.
- Copy Link
- Report Inappropriate Content
You can try to use different computer and different cable to have a test, the cable should be cat 5e or above.
The link speed is very important as well, check the link speed on the computer, make sure it's not the link speed limit the lan speed.
If your firmware is not the latest one, can try to upgrade it.
https://www.tp-link.com/en/faq-315.html
- Copy Link
- Report Inappropriate Content
The cables are Cat5 and the firmware is updated to the latest version.
The problem still exists, when watching content of 720p quality or higher comprated by the network the videos stop and do not work, however with the old router, zte f680 the videos work perfectly, what can I do?
- Copy Link
- Report Inappropriate Content
You will need to go into the router management website, i.e. http://<router IP> and do some basic management. Additionally, visit tp-link support website and download the product manual for the router. Furthermore, do review firmware downloads and FAQs section too.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 1866
Replies: 7
Voters 0
No one has voted for it yet.