Home Network Community > Wi-Fi Routers > TL-WR941HP - led-controller[1014]: <6> 288051 Start to run WAN0_OFF
< Wi-Fi Routers

TL-WR941HP - led-controller[1014]: <6> 288051 Start to run WAN0_OFF

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
12345

TL-WR941HP - led-controller[1014]: <6> 288051 Start to run WAN0_OFF

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
44 Reply
Re:TL-WR941HP - led-controller[1014]: <6> 288051 Start to run WAN0_OFF
2020-09-24 11:46:58

@aclg230560 

 

Hi, thanks for the details.

 

May I know who is your ISP?

 

When the WAN LED became orange, can you access the web interface? If so, what is the internet IP address and default gateway at that time?

 

Meanwhile, can you get the internet from the modem directly when the WR941HP drops connection?

 

Besides, please follow the instruction below to do some tests and tell me which case you belong to.

https://www.tp-link.com/support/faq/2237/

 

BTW, please try to modify the wireless channel and security, channel can be 1/6/11, security should be WPA2-PSK, AES, then reboot the router and confirm again.

 

Good day. 

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer AX55V2 Supports WireGuard VPN, EasyMesh Ethernet Backhaul, IoT Network, Speed Limit,and More If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
  0  
  0  
#22
Options
Re:TL-WR941HP - led-controller[1014]: <6> 288051 Start to run WAN0_OFF
2020-09-24 17:19:17

@Kevin_Z you are making the sane questions that you did it to me. Do you need a confirmation ? Please answer why TP-link retired the firmware version TLWR941HP-UN-UP-VER2.0,2,-P1[20191125-rel54756]-2019-11-25_15.11.52  for this router model. What happend with this firmware that is no more available? The last firmware is ver2.0.1-2017125rel 60160 ? Please answer me.  Thank you

  0  
  0  
#23
Options
Re:TL-WR941HP - led-controller[1014]: <6> 288051 Start to run WAN0_OFF
2020-09-25 01:10:19

@aclg230560 

 

Hello, sorry about that.

 

May I know where did you see this firmware version TLWR941HP-UN-UP-VER2.0,2,-P1[20191125-rel54756]-2019-11-25_15.11.52? It is still available on the official website, as you can see on the global website:

https://www.tp-link.com/en/support/download/tl-wr941hp/#Firmware

 

If you found it is not available on the local website, please give me the directly link site and we will confirm, thanks.

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer AX55V2 Supports WireGuard VPN, EasyMesh Ethernet Backhaul, IoT Network, Speed Limit,and More If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
  0  
  0  
#24
Options
Re:TL-WR941HP - led-controller[1014]: <6> 288051 Start to run WAN0_OFF
2020-09-25 02:32:55

@Kevin_Z when I asked for my problem the first aswer was to upgrade the firmware. So I download it from TP LInk site in the page off this router under the menu firmware.  After all , send to  my email a special version B test firmware 2.0.1 and I install it.  This firmware was send to me. It doesn't resolved the problem off the wifi hang aleatory. So I re install the previuos firmware and when  I looked for it to download again, it was no more available.  And I had made a copy off this version previously.  But the question is present, why it is not available ? What happened ?

  0  
  0  
#25
Options
Re:TL-WR941HP - led-controller[1014]: <6> 288051 Start to run WAN0_OFF
2020-09-25 02:37:01
it was posted 2020-0309 so I am not crazy.
  0  
  0  
#26
Options
Re:TL-WR941HP - led-controller[1014]: <6> 288051 Start to run WAN0_OFF
2020-09-25 02:44:03
When the Wifi hangs I have no access to the administration web page. My notebook is connected to internet using Wifi. My ISP is Antel, the only company who gives you access to internet and is a govern company.
  0  
  0  
#27
Options
Re:TL-WR941HP - led-controller[1014]: <6> 288051 Start to run WAN0_OFF
2020-10-19 10:04:04

@Marcelo.Linardi 

 

Hello Everyone,

 

I have been facing the same issue for so long and managed to solve the problem. The problem start to appear when I make the internet connection type to dynamic IP (advanced--> Network--> internet-->internet connection type). When I changed this option to static IP it seems that it solved the problem!! so weird. I have been running the router in static IP for the last two days without any issue, where before I used to have the connection drop every single minute. I will keep running the same configuration and keep you posted.

 

Kind Regards,

 

  1  
  1  
#28
Options
Re:TL-WR941HP - led-controller[1014]: <6> 288051 Start to run WAN0_OFF
2020-10-19 21:31:13

@Moutaz thanks for your solution, you have made more for this problems than TP link . You find the error, so TP Link must fixed it in the firmware and pay you. I my country I need to specifiy that Internet connection is via PPoE, so it is no usefull for me, but as an computer system engenier with more than 39 years off experience in servers & lan enterprise systems  tell you that TP Link firmware has bugs, more than 30 reports about the same problems, more than 2 years and they don't do nothing more than applied the protocol asking for the same questions to every one of us, doing nothing. Not even to trace the code to see what it is wrong. I know this is home, the last step of his negocy, so it is the interest in solving. Really can you thinkg that a firmaware off a product has more than 30 issues marking the same problems and there is no a new version in almost 2 years?  Sorry, this the reality. I really apreciate your effort @Moutaz.

  0  
  0  
#29
Options
Re:TL-WR941HP - led-controller[1014]: <6> 288051 Start to run WAN0_OFF
2020-10-23 15:11:26

@aclg230560  I totally agree with you, Tplink has to update and fix the firmware. This is the second router I bought from Tplink this year and with the same errrors. I have ac4200, I am still getting the problem. I think they have to update the fireware

  1  
  1  
#30
Options
Re:TL-WR941HP - led-controller[1014]: <6> 288051 Start to run WAN0_OFF
2020-10-26 01:45:11
looks like there will be no update ,
  0  
  0  
#31
Options
12345
Related Articles
TL-WR941HP
790 0
 Red LED color on my TL-WR941HP V1
779 0
 TL-WR941HP V2 WAN Orange LED
3167 0
 my TP-Link TL-WR941HP is nor workiing, only PWR led is on
2373 0
TL WR941HP chromecast issue
1077 0
 Tl wr941hp
686 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.