RE450 Bricked - How to access recovery mode and solve the problem
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Hi
I've been updating the RE450 and after the update it does not give IP address anymore and only stays with the power light, searching the internet I saw that the repeater may have "Bricked" and I have that access recovery mode to correct the problem. two issues:
1) How do I to enter the RE450(BR) in "recovery mode" and what is the procedure that do i have to do ?
2) Do you suggest anything else that can solve the RE450?
Thank you for your help
Best Regards
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Hello, there is only power light on after you upgraded the firmware, did you try to reconfigure it with the below instruction:
https://www.tp-link.com/en/download/RE450.html#video or https://www.tp-link.com/en/faq-1400.html
And the RE450 does not support firmware recovery.
Good day.
- Copy Link
- Report Inappropriate Content
Hi
Thanks for your feedback, the problem is that I can not get into this setup .. I tried everything to access the RE450
I've tried http://tplinkrepeater.net or http://192.168.0.254 and nothing happens ... only power light accesses ... Thanks...
- Copy Link
- Report Inappropriate Content
Thanks for sharing this to us. It is a nice post. Get complete details about the latest apps.
- Copy Link
- Report Inappropriate Content
julianoctba wrote
Hi
Thanks for your feedback, the problem is that I can not get into this setup .. I tried everything to access the RE450 I've tried http://tplinkrepeater.net or http://192.168.0.254 and nothing happens ... only power light accesses ... Thanks...
hey, can you see the default wifi network name after you reset the RE450?
What is the IP address and default gateway of your computer with it connected to the extender? You can use the default gateway to login.
https://www.tp-link.com/en/faq-838.html
If still does not work, you need contact the tech support to get warranty service.
https://www.tp-link.com/en/support/contact-technical-support/#Hotline-Support
- Copy Link
- Report Inappropriate Content
Hi
Thanks for your replay, but still not working, dont find IP adress
I will contact TP-Link Support
Best Regards
Juliano
- Copy Link
- Report Inappropriate Content
julianoctba wrote
Hi
Thanks for your replay, but still not working, dont find IP adress
I will contact TP-Link Support
Best Regards
Juliano
Hi
What a pity, it seems that it is faulty.
Hope that device is still under warranty, and then you can get a replacement.
Good day.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 4321
Replies: 6
Voters 0
No one has voted for it yet.