configure TL-WPS510U with windows 10 WLANCONNECT issue

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

configure TL-WPS510U with windows 10 WLANCONNECT issue

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
configure TL-WPS510U with windows 10 WLANCONNECT issue
configure TL-WPS510U with windows 10 WLANCONNECT issue
2019-07-14 08:24:58
Model: TL-WPS510U  
Hardware Version: V7
Firmware Version:

Hi ,

I am trying to configure TL-WPS510U as print server with EPSON L210. I can see that EPSON 210 is in the compatibility list for this server.

I am in Windows 10 OS.

Using Easy Setup for configuration. for setup wizard.

When in the step 2 'Select Print Server', I can see the SSID line and that is correct. Biut when I push Next Button, continuously getting error message 'WLANConnect Failed, invalid Parameters'.

Can anyone help me in overcoming the same?

 

Regards,

Sarit

  0      
  0      
#1
Options
4 Reply
Re:configure TL-WPS510U with windows 10 WLANCONNECT issue
2019-07-15 07:08:23

@SARIT 

 

Please clcik here to get instruction to configure the print server. 

  0  
  0  
#2
Options
Re:configure TL-WPS510U with windows 10 WLANCONNECT issue
2019-07-15 12:52:45

Dear Kavin,

Thanks for your reply.

I already tried this. But not able to do as I got stuck in Step 5: '

Step 5

On the iPad, change the static IP for the WIFI connection to 10.0.0.123/255.255.255.0 and connect to the Ad-Hoc network WLAN-PS again.

 

By WIFI connection, does it mean the connection of SSID WLAN-PS or SSID of my home internet connection? Is there any video available on this anywhere?

 

I am sorry to ask this, but this is too complicated for a normal person to configure this for sure. Tried 3 times from scratch but still grasping.

 

Regards,

Sarit

  0  
  0  
#3
Options
Re:Re:configure TL-WPS510U with windows 10 WLANCONNECT issue
2019-07-17 02:56:13

@SARIT 

 

Please connect your iPad to the print server's wifi and then setup the static IP for it. 

 

How to do it: Go to settings-wifi page, click the print server's wifi you have connected, and go to configure IP page and choose static IP. 

 

While sorry to tell you that there is no video available yet. 

 

You can give it a go with the FAQ. May it help. 

 

  1  
  1  
#4
Options
Re:Re:Re:configure TL-WPS510U with windows 10 WLANCONNECT issue
2019-07-18 10:34:35

Thanks Kevin. Yesterday night i figured out what I was doing wrong. Step 5 should read as:

 

Step 5

On the iPad, change the static IP for the WIFI connection to 10.0.0.123/255.255.255.0 and connect to the Ad-Hoc network WLAN-PS again, then change WLAN-PS static IP to 10.0.0.xx/255.255.255.0.

 

Then follow step 6.

 

 

  0  
  0  
#5
Options

Information

Helpful: 0

Views: 5539

Replies: 4