I had to replace my C6 with an old router at the momant because it is not possible to have a stable connection for more then a few hours. I am still hoping tp-link will fix the problem.

@DaryllD 

Do you mean the special build with logging feature ?

It`s a horrible build and the worst i saw with this issue.

Each beta build (all higher than 1.3.5 will show faster disconnect issue)

Use 1.3.5 and lower in the moment.

I`ve have tested the build you want. With this build my 5 Ghz dies.

I`ve sent the logs two times to TP-Link, all my questions were not answered, but they are testing clients that can cause this.

In my case it seems to Apple products. But i have no Apple products. So it seems that a client just wants to connect can cause this issue.

But i can reproduce this how much i want, and i don`t know what TP-Link is doing against it at the moment, it looks for me that they cant reproduce it.

I`m sure the problems with the other models are the same bugs. I`m not hoping it`s the hardware...

If you dont need the OneMesh feature, there is somewhere a beta in this forum, that disable it. Search for it. It is also a 1.3.x build so you can upgrade to it from a 1.3.x build.

I would try it, but i need OneMesh.

Update:

I`ve have found the build it´s Beta 1.3.1 here:

Link to topic

Direct Link to download

In this build the hidden network for OneMesh is disabled, so it is working like a pre 1.3.0 build.

I have not tested it, so it is your own risk .

Best Regards.

@Kubas 

That`s good to hear.

As far as i know you had crashes with that firmware ? Do you changed something in your setup ?

The last Beta 1.3.6 Firmware posted in this thread is optimized for that bug, the 1.3.7 Beta is optimized for high ping bug only (as far as i know).

I get every firmware stable, if i disable the 2.4Ghz guest network. And i have tested this with every available firmware.

Now I use the latest 1.3.5 stable version and it works, but i leave the 2.4Ghz guest network disabled, i don`t need it. Also changed the options "allow guest to see each other" and "allow guest to access the local network" to enabled, even when i don`t use it.

I will test this again, if a new stable version comes out.