Using local DNS server
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.Using local DNS server
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
I'm using raspberryPi 2 a VPN & DNS that I installed last week.
I have DHCP in range of 192.168.0.100-192.168.0.255
My router is 192.168.0.1
and my rapsberry pi is 192.168.0.120
Since I install it and I want to use it, I got some issues configure that in the router, because it using same subnet.
I try to change Pi to 192.168.1.1 but then it gone, and 192.168.0.20 still in the same subnet.
What is the right configuration ?
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
What is the current network topology? How do you connect these devices together?
Do you want to use the raspberryPi 2 as the local DNS server?
- Copy Link
- Report Inappropriate Content
I Have router from ISP that I'm using in bridge mode (like modem)
The Archer C2 - Internet port connected to 'modem' and my 1- my pc, 2- my rapsberrypi2 (The DNS I want to use), 3- other pc
- Copy Link
- Report Inappropriate Content
Unbound is pretty easy, supports bind style config files and fairly reliable. If the server will be a stand-alone 'gateway' type box, and you'd like a few extra niceties, you might want to take a look at the firewall/gateway distro called untangle as well. router 192.168.1.1
- Copy Link
- Report Inappropriate Content
The main problem here isn't the firewall, is only to get easy using hosts (call an ip by name).
I need only to configure that in the router, what is the IP that my raspberry pi need to get ?
- Copy Link
- Report Inappropriate Content
Per you said, cause the IP of the raspberry is in the same subnet of the main router, we are not able to change the WAN DNS.
While as a workaround, you can change the DNS server under DHCP settings page, the effect is the same.
Good day.
- Copy Link
- Report Inappropriate Content
@Kevin_Z Then it will be out of the segmant and I cannot access it.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
@Kevin_Z Hi Kevin,
The router is 192.168.0.1, then DHCP is from 192.168.0.100-255
The Pi-Hole is 192.168.0.120
- Copy Link
- Report Inappropriate Content
Thanks for your explanation. The router and the Pi-Hole are still in the same subnet.
So if you want to use the Pi-Hole as the DNS server, you can change the DNS server under Advanced-network-LAN settings page to the Pi-hole one.
May it help. Good day.
- Copy Link
- Report Inappropriate Content
@Kevin_Z What need to be here ?
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 19583
Replies: 12
Voters 0
No one has voted for it yet.