AX6000 Slow upload speed
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
I'm using fiber internet connection thru PPPOE connection .. download speed 500 mbps and the upload 100 mbps before I was using c7 and c2300 thru pppoe and I'm getting the full speed on both, now I switched to ax6000 and there's no issue with the download speed but I'm facing issue with the upload speed its between 18 to 30 mbps.
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
@utpal225 @ELEVONY @hksavaliya @originalsyn @speedmaster @Sultanmsa @seelymike @TOMI313 Another quick update, don't laugh at me heee heee...
Against my own better judgement (and because TpLink is almost the only brand of routers you can buy in my country, there are others but they dont have the same variety), i bought the Archer AX11000.
The firmware is exactly the same, and the problem is also there. The upload is TERRIBLE, in a 600 dollars router.
And, in the TOP OF THE LINE router from Tp-link, you cant disable QOS, and you dont have a CLI interfase to tinker with the configuration, no debug options, NOTHING. The person responsible for these decissions must be fired IMMEDIATELY.
The joke is on me, i know... I've should have known better than to buy yet another expensive router from TpLink.
- Copy Link
- Report Inappropriate Content
Send it back if you can and buy from other brand.
- Copy Link
- Report Inappropriate Content
@TOMI313 Sadly, i cant. In my country the sellers never accept returns... I will try to sell the AX6000, so at least i will have only one defective router lol...
Best regards!!!
- Copy Link
- Report Inappropriate Content
Hi sorry to respond late.
To solve your issue, our engineer will email you and give you some suggestion.
Please check your inbox.
Good day.
- Copy Link
- Report Inappropriate Content
Hi!
Thanks for your reply,I hope this issue will be resolved soon.I'm waiting the engineer to contact me.
Have a nice day!
Regards,
Tomi.
- Copy Link
- Report Inappropriate Content
Hello, to help you figure it out, our engineer will email you later and give you some suggestion.
Please check your inbox and keep in touch with them.
Good day.
- Copy Link
- Report Inappropriate Content
@Kevin_Z Hi!!!
Just continuing with the tests, in speedtest.net, single connection, this is the result (my connection is 250/25 down/up):
As you can see, the upload is very stable at 1/3th - 1/4th the total speed.
Seeing that is SOOO stable, i'm pretty sure that QOS (the processing part) is not the culprit (although i need to turn it off, because i don't want to use it, we MUST have the option to disable it)...
There is a speed cap deep in the firmware (maybe in the drivers, maybe in the QOS section, maybe in the core), and maybe it is active only when certain circumstances are met, and that's why not everyone is having this problem.
Being a software developer myself, i know first hand that this errors are common (you are testing something and later on forget to remove this code), but there is certainly something wrong, in the AX6000 and in the AX11000 firmware... (the fact that is present in the two firmwares is a clue that may help to find the problem)
Best regards!!!
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Hi!
Nobody has contacted me yet... :/
Hi!
Please make another beta firmware with an option to disable the QoS!
Best Regards,
Tomi.
- Copy Link
- Report Inappropriate Content
@pjaguilar @Kevin_Z @utpal225 @ELEVONY @hksavaliya @originalsyn @speedmaster @Sultanmsa @seelymike @TOMI313
Hello:
Just to let everybody know that I have this annoying issue too and I've been following this thread several weeks ago in the hopes of a fix.
Regards.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 4
Views: 31628
Replies: 80
Voters 3
