Home Network Community > Range Extenders > AC1750 Range Extender LEDs
< Range Extenders

AC1750 Range Extender LEDs

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

AC1750 Range Extender LEDs

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
AC1750 Range Extender LEDs
AC1750 Range Extender LEDs
2020-02-09 22:49:29 - last edited 2020-02-22 14:07:56
Model: RE450  
Hardware Version: V2
Firmware Version: 1.0.4 Build 20171220 Rel. 73615

Hello Everyone,

 

I purchased this extender yesterday and set it up as per instructions withought a hitch. 

 

After setup I moved the unit one floor up from where my router is located and into relatively in the middle of the house.  When plugged in all LEDs light up solid except for the 5GHz.  It was lit after setup.  But I can see and connect to it with all of my devices.  Here is what it looks like.

 

Any suggestions why the 5GHz band works but the LED is off?

 

 

tia

  0      
 
  0      
 
#1
Options
1 Accepted Solution
Re:AC1750 Range Extender LEDs-Solution
2020-02-22 14:06:31 - last edited 2020-02-22 14:06:43

Thought I'd update the thread after finding my solution to this issue.

 

After acquiring another router the same thing happened with the 5ghz led.  So I thought it might be a defective unit and got an exchange.  Nope, not a defective unit cuz it's still happening with the exchange.

 

I started looking at the settings of the router and the extender and thought maybe my router is blocking the 5ghz signal somehow.  So I turned off the MAC address filtering feature and BAM, the 5ghz led lit up.  I then started to look at what devices were attached wirelessly to the router by process of elimination.  There was one MAC address I didn't recognize and I assumed that was coming from the 5ghz band.  Plugged that in the MAC address filtering list, turned the feature back on, and the 5ghz led stayed on.  Woohoo!!! 👍👍

Recommended Solution
  0  
  0  
#7
Options
7 Reply
Re:AC1750 Range Extender LEDs
2020-02-10 05:29:41

@tcc Normally, 5G wifi have shorter coverage than 2.4G Wifi. According to the screeshort you provided, RE450 2.4G is connecting to your router but not 5G, then maybe the position RE450 is located have very weak 5G WiFi signal from your Router. 

 

Then please try to move RE450 close to your router, I think this will help.

 

 

  0  
  0  
#2
Options
Re:AC1750 Range Extender LEDs
2020-02-11 00:43:02 - last edited 2020-02-11 00:53:11

Hi Selin,

 

I moved the RE450 back to the location where I set it up which is within 2 feet of the router and the 5GHz LED still does not light up.  Other than the 5GHz LED not lighting up everything is working.

 

Edit: I just reset the extender and this time around when setting it up the 5GHz LED did not come on after configuration.  Yet I still am able to connect to the 5GHz band.

  0  
  0  
#3
Options
Re:AC1750 Range Extender LEDs
2020-02-11 00:56:53

@tcc That's weird. Please share the model No of your router. And also you could provide a screenshot of the 5G wifi settings on your router.

 

You may need to get help from Tplink, and I believe they will do that.

  0  
  0  
#4
Options
Re:AC1750 Range Extender LEDs
2020-02-11 01:34:19 - last edited 2020-02-11 01:38:04

@Selin The router is a Netgear N600 WNDR3700v3.  What I also find weird is that the extender is saying there's no signal or mac address yet as I'm writing this I'm connected to the 5G extender band.

 

5G settings

 

  0  
  0  
#5
Options
Re:AC1750 Range Extender LEDs
2020-02-14 09:13:59

@tcc 

 

Thanks for your time and information provided.

 

Our engineer has emailed you and they will do further analysis to fix it.

 

Please check your inbox and get in touch with them.

 

Good day.

 

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer AX55V2 Supports WireGuard VPN, EasyMesh Ethernet Backhaul, IoT Network, Speed Limit,and More If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
  0  
  0  
#6
Options
Re:AC1750 Range Extender LEDs-Solution
2020-02-22 14:06:31 - last edited 2020-02-22 14:06:43

Thought I'd update the thread after finding my solution to this issue.

 

After acquiring another router the same thing happened with the 5ghz led.  So I thought it might be a defective unit and got an exchange.  Nope, not a defective unit cuz it's still happening with the exchange.

 

I started looking at the settings of the router and the extender and thought maybe my router is blocking the 5ghz signal somehow.  So I turned off the MAC address filtering feature and BAM, the 5ghz led lit up.  I then started to look at what devices were attached wirelessly to the router by process of elimination.  There was one MAC address I didn't recognize and I assumed that was coming from the 5ghz band.  Plugged that in the MAC address filtering list, turned the feature back on, and the 5ghz led stayed on.  Woohoo!!! 👍👍

Recommended Solution
  0  
  0  
#7
Options
Re:AC1750 Range Extender LEDs
2020-02-24 07:10:42

@tcc 

 

Thanks for your update. Glad to hear that you figured it out. 

 

If possible, could you please take a screenshot of the MAC address filtering settings page and send it to us? Then we can do further analysis at our end. 

 

Thanks a lot. 

 

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer AX55V2 Supports WireGuard VPN, EasyMesh Ethernet Backhaul, IoT Network, Speed Limit,and More If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
  0  
  0  
#8
Options

Information

Helpful: 0

Views: 1406

Replies: 7

Related Articles
 RANGE EXTENDER AC1750
361 0
AC1750 WIFI extender
153 0
 RE450 AC1750 Wi-Fi Range Extender
901 0
Query Range Extender
519 0
 Hardwire AC1750 extender
987 0
 AC1750 wifiRange extender
413 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.