Archer MR600(EU) V1 - BETA Firmware - Allowing selection of 4G+bands for Archer MR600 manually
Hi all,
Following the long thread on the same subject discssing the BETA FW, as I said I would, TPLink have given me permission to share the FW download llink.
From TPLink - We recently released a beta firmware for Archer MR600(EU) V1 which can allow us to select 4G+bands for Archer MR600 manually.
https://static.tp-link.com/2020/202004/20200420/Archer_MR600v1_1.1.0_0.9.1_[200417-rel75138]_up_boot_2020-04-20_08.44.31.zip
For Archer MR600, if you want to use its 4G+network, your SIM card should support the CA bands group Archer MR400 supports. Please check the attached picture and check if your SIM card supports the band groups on the list or not.
They asked me to state that, this BETA FW is for the Archer MR600(EU) V1 ONLY!
Neither TPLink nor me take any respnsbility if you flash a none-EU router.
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Hy I've tridd to install this firmware but returns an error:
Error code: 71211
Failed to upload upgrade file. Please select the correct file.
Firmware version
1.1.0 0.9.1 v0001.0 Build 190412 Rel.66770n
Hardware Version:
Archer MR600 v1 00000001
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
After installed this firmware i will try to turn back with flashing official firmware but now i received only an error !
Why?
Is not possible to turn back with official firmware?
And probably now is not possible to make an downgrade but in the future i will upgrade this modem with new firmware?
Please give us an answer !
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
@bartvz, first thanks for the reply..
About the firmware i would like to turn back in warranty because in this modem i have found several problems...
The mobile network with mobile operators my modem is ok also before but is obviously more performance with this firmware.
My modem have the wifi power that grow up and down and this is not good for me... I use more the wifi connection in my house and with this modem is impossible to use these two wifi networks because this growing up and down make the connection unstable and my wifi extender became crazy because is always red situation because the WiFi power is unstable..
Other think is the ghost network... What is this ghost network that come out and immediately after desappeared?. . Is for mesh devices? To have a connection to these mesh devices?
So i would like to turn back to install the previous version of the firmware to make a procedure to turn back in warranty... And i do not want to have a problem with the warranty!
If i do not turn back.. With the old buggy version Is possible to make a version that not show the confidance words?
Thanks for your work!
- Copy Link
- Report Inappropriate Content
@Robynbra have you resetting the router to factory settings to get rid of the ghost network?
Else, have you tried accessing the telnet server? From what I can see you can manually edit config files so that might be worth a shot :)
- Copy Link
- Report Inappropriate Content
@bartvz ,
Obviously i have reset several times my modem but the ghost network come out always look here:
http://www.imagebam.com/image/2af8f11345681750
http://www.imagebam.com/image/8d1dbd1345681817
You have talking about telnet this was an older command too many years ago!
But how?
And the two wifi network is terrible for the power that grow up and down and not are stable!!
- Copy Link
- Report Inappropriate Content
@Robynbra Guest networking off?
- Copy Link
- Report Inappropriate Content
@darant ,
obviously yes!
I never have activated the guest networks...and the selector is in "off" mode....
so Or there is a problem with this modem that this ghost network is for mesh devices or sometimes this modem turn on the guest network but after more second turn off?
Possible that no one people have seen this ghost network?
- Copy Link
- Report Inappropriate Content
@darant do we have similar beta version for mr400 to select network bands.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 13
Views: 194064
Replies: 511