Archer AX6000 Firmware upgrade ruined everything. Cant go back?
Hi bought the Archer AX6000 and i was happy enough with it. NO real issues.
Yesterday I got an update for firmware, which i did using the Routers inbuilt tool.
Then the problems began.
I couldnt reconnect any of my Google Home speakers each complaining the Netowrk was in AP mode, which is clearly wasnt.
I factory reset the router and started from scratch which took a considerable ammount of time but i still cannot get the home network back to its pre Firmware upgrade state.
All day yesterday your support site was offline for me which is pretty unacceptable, there was no way i could get the old Firmware downloaded so....
I eventually gave up and today have downloaded the 2 previous official EU firmwares. 2020/02/12 and 2019/08/02.
Unzipped them and connected to the router via rj45 to flashback to the previous version... Its not the first time i do firmware i know what im doing.
AND... Nope it just says nope. cannot do it. It wont accept an older file?
Please i am so fed up with this damn router.
I thought id be upgrading to a decent wifi6 experaince with everything i need for the next 5 years but nope its a massive pain in the arse to be honest and im regrettting the purchase.
I cant even find patch notes on the firmware that got updated.... its like its a ghost release
PLEASE PLEASE
Help !
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
So they are able to load the older firmware, they log into the device via telnet (they even need to install a telnet client if it's not installed in your windows installation. They edit a line in the config to say that you have an older version than the version you are installing. It's worth getting them to to a remote session on your machine. They leverage Teamviewer to actually allow the remote connection to your PC.
Anyways it seems like I'm good now.
- Copy Link
- Report Inappropriate Content
thanks - they need to allow this for everyone. Ridic
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
yep. That one was stable and the one I want to roll back to.
- Copy Link
- Report Inappropriate Content
Wouldn't it be simpler just to re-release the older firmware but with a higher version number till they sort out the underlying issues and can release a true update? That would avoid having to do a per-customer workaround.
- Copy Link
- Report Inappropriate Content
@jam9 but that would be logical.
I mean that is why they have point releases after all.
- Copy Link
- Report Inappropriate Content
easier yes, but I'm not convinced they get that.
the guy had to edit what seemed to be the running config at the commend line to get running version number lower than the installed version. In two places. 😀
- Copy Link
- Report Inappropriate Content
Yes yes it would be...and may acutally show customer service...and that they care about their customers....and easy for everyone...but no.....
- Copy Link
- Report Inappropriate Content
I've had the same problem since early June and I've had a ticket open since the day after installing the firmware. The ticket has been sitting in a sr. support alalysts lap since then with not progress but that was my own fault since I had a typo in the email address I provided. That being said, I reached out to support 7 times to get the address corrected with no luck.
Yesterday I started another live chat with support, provided the original ticket number and demanded that they work with me to roll back the firmware same day. After a 3 hour wait, Someone reached out through email and we started a screen share. He wasn't able to take control of my PC so he provided instructions and I did the work. Its very easy and only took about 8 minutes and I'm back on the March firmware. I noticed a difference right away.
The process involves installing a beta firmware, telnet into the routher, change the version and save, install the old firmware.
- Copy Link
- Report Inappropriate Content
I'm having similar issues. Specifically for me, I had been using the Archer AX6000 as an access point with cable modem internet service through Xfinity, using a TP-Link TL-R600VPN router for the DHCP work. It was extremely difficult to get this router set up as an access point initially by the way... After changing internet providers to CenturyLink, for 1Gbps internet, I have had nothing but problems.
Initially tried to use their DSL modem/router as my DHCP, and keep the Archer AX6000 as wireless access point. Nope, the Archer AX6000 WOULD NOT CONNECT to the modem/router no matter what I did. I thought I was doing something wrong. Then, out of frustration, since I knew it had worked behind the TL-R600VPN router, I began exploring how to make that happen. I was able to put the CenturyLink modem/router into Transparent Bridging mode, which essentially just made it into a modem, then I could use my TL-R600VPN router behind it for the LAN side. Doing this, I **WAS** able to get the Archer AX6000 to connect and work in Access Point mode. However, I was curious about my new Gigabit internet speed (who wouldn't be), so I began doing some speed tests. Speed tests from my iPhone 11 Pro, on the 5G network seemed to go fine. But speed tests from my older laptop on the 2.4GHz band caused the AX6000 to drop connection with the router, and the blue light would spin around and around, and eventually it would usually regain connection with the router, but sometimes it wouldn't -- I'd need to unplug & replug in for it to reconnect.
I'm fairly certain this is an issue specific to the AX6000 router because I have an Archer AX3000 router set up in my garage also in access point mode, identically to how I set up the AX6000 (except for IP address of course), and it has worked great. I just did a chat with a representative, and told him about this posting, and wanting to downgrade to previous firmware. He said he was going to email me instructions about how to do it, so we'll see if that happens, and how it goes.
It's been a frustrating couple of weeks, that's for sure. I do think TP-Link should be working on this urgently. This is quite an expensive router, and for it to just not work is unacceptable. I'm hoping this firmware downgrade does the trick, and that they can come up with a better long-term solution.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 7
Views: 33612
Replies: 151