Tether App up and down speed not shown

Tether App up and down speed not shown
Tether App up and down speed not shown
2020-07-20 10:23:37 - last edited 2021-12-23 12:30:15
Model: AC50
Hardware Version: V5
Firmware Version:

Hi,

 

I am using TP-Link Tether android app to manage my Archer C20 ac750.  The tether app not  showing  up and down speed.  

 

Thanks

0
0
#1
Options
1 Accepted Solution
Re:Tether App up and down speed not shown-Solution
2021-12-23 12:13:40 - last edited 2021-12-23 12:30:15

@nyonyo 

 

Hello, I want to confirm what speed do you want to check on the Tether app? Do you want to monitor the real-time rate for each device that connects to the router network? Or the link rate between the device and the router?

 

If you want to check the real-time rate for each device, please follow this article to configure QoS settings on the router, then check if it will display that:

https://www.tp-link.com/support/faq/2797/

Recommended Solution
0
0
#4
Options
3 Reply
Re:Tether App up and down speed not shown
2020-08-07 01:37:52

@Raghavgagneja 

Hello

Thank you very much for your patience.

We got a few feedback about this suggestion.

Some of our wireless routers already supported that, for Archer C20, it Is still not available yet.

And we would report to our R&D department for evaluation.

Hope it could be updated in the future.

If you have other feedback, please feel free to post here.

 

Thank you~

0
0
#2
Options
Re:Tether App up and down speed not shown
2021-12-10 23:51:48

@Myapps 

Doesn't work on Archer C80 either

0
0
#3
Options
Re:Tether App up and down speed not shown-Solution
2021-12-23 12:13:40 - last edited 2021-12-23 12:30:15

@nyonyo 

 

Hello, I want to confirm what speed do you want to check on the Tether app? Do you want to monitor the real-time rate for each device that connects to the router network? Or the link rate between the device and the router?

 

If you want to check the real-time rate for each device, please follow this article to configure QoS settings on the router, then check if it will display that:

https://www.tp-link.com/support/faq/2797/

Recommended Solution
0
0
#4
Options