Van use

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Van use

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Van use
Van use
2020-08-03 19:08:31 - last edited 2020-08-04 07:24:08
Model: Archer MR600  
Hardware Version:
Firmware Version:

Hi, could anyone let me know if i can use a 12v supply from a van liesure battery to power a Archer MR600 for use in a van, and if so, where I could obtain one, I have seen a 12v 3amp on ebay, the tplink power supply is rated at 12v 1.5amp with kind regards Kelvin 

  0      
  0      
#1
Options
3 Reply
Re:Van use
2020-08-04 07:42:27

@Overdale 

hello,

Since We did not run any test for the van leisure battery with Archer MR600, so in order to keep a good performance, it is suggested that MR600 is powered on by the original external DC output.

But if you had any findings, please feel free to share it here.

Thank you very much~

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer BE550 New Software Enhances System Stability and Optimizes MLO Network Stability. TL-WA3001 Supports EasyMesh, Speed Limit, Guest Network in AP Mode and/or Multi-SSID Mode. If you found the post or response helpful, please click Helpful. If an answer solves your problem, click "Recommended Solution" so that others can benefit from it.
  0  
  0  
#2
Options
Re:Van use
2020-08-04 09:10:22

@Overdale 

 

It should work, but make sure that it is a stabilized 12.0V supply and doesn't directly apply 13.8V from the battery.

  0  
  0  
#3
Options
Re:Van use
2020-08-04 13:52:17

@Baenz  thanks, my intention is to run it through a car socket adapter that should stabilize the voltage, so based on your comment  ill test the output for awhile before trying it

  0  
  0  
#4
Options