ARCHER MR200 v4 Random i can't access to web management page

ARCHER MR200 v4 Random i can't access to web management page
ARCHER MR200 v4 Random i can't access to web management page
2020-08-04 18:24:26 - last edited 2020-08-04 18:26:35
Hardware Version: V4
Firmware Version: Archer MR200(EU)_V4_200526

Hi,

This is my configuration in simple form:

Router:

Static IP 192.168.0.254

Submask :255.255.255.0

Local management : port on HTTP: 80

PC:

Static IP: 192.168.0.1

Submask :255.255.255.0

Gateway: 192.168.0.254

 

Connected via RJ45

 

I don't understand because at time T1 i can access from to PC to Router  management page ( http://192.168.0.254 ) and not at T2 !!

Between T1 and T2 :

- no Router reload

- no PC (Windows 10) reload

( no problem with the internet connection)

 

Some suggestions?

Thanks !

Luciano

 

 

 

 

 

0
0
#1
Options
6 Replies
Re:ARCHER MR200 v4 Random i can't access to web management page
2020-08-10 08:14:46

@evvivame 

Hello,

Thank you very much for your time and patience.

Did you manually change the LAN IP address on the router to be 192.168.0.254?

When you failed to log in via 192.168.0.254, can you still ping the IP address?

https://www.tp-link.com/support/faq/425/

And what happened if you try to log in via http://tplinkmodem.net ?

 

Thank you.

0
0
#2
Options
Re:ARCHER MR200 v4 Random i can't access to web management page
2020-08-10 17:49:15

@Sunshine 

Thannk for your kind replay !!

Some others infos:

 

1) in my configuration i use Static IP : example 192.168.0.4 (see down)

 

 

2) when the managemnt page isn't reachable the ping to router is correct:

 

 

3) with the browser if i try with 192.168.0.254 ( same with http://tplinkmodem.net/ ) i see a loop of the little bal left to right (see down)

 

 

4) When the mgt page isn't reachable  with 192.168.0.254 also with xxxxx.dyndns.info:8080; when run all fine BOTH (local &remote) are ok !!

5) Remember :EXCEP the router management page NOT reachable the rest run all fine like: internet connection, remote control (Teamview, VNC) ecc.

 

Again thanks for support !

Luciano

0
0
#3
Options
Re:ARCHER MR200 v4 Random i can't access to web management page
2020-08-14 02:17:33

@evvivame 

Good day.

Thank you very much for your patience.

I noticed that there are two kinds of connection on the computer, one is 192.168.56.1 with  virtual Ethernet adapter, and the other is 192.168.0.4/ 192.168.0.254 (gateway) on another Ethernet adapter;

So did you set up the VPN or other virtual connection on this computer?

Have you had any issue when the wireless devices are connected to the Archer MR200?

Thank you~

0
0
#4
Options
Re:ARCHER MR200 v4 Random i can't access to web management page
2020-08-15 10:29:22 - last edited 2020-08-17 19:39:02

@Sunshine 

Thanks!

Last news!

Yesterday 14th at:

15.00 web mgt page NOT reachable 

15.05 router power off ->on

15.10 web page mgt NOT reachable

15.20 change the old router with a NEW router (SAME model ! ) loaded with the configuration previous saved from the old router

RUN ALL VERY WELL inclusive the access to web mgt page ( both from 192.168.0.254 or from xxxx.dyndns.info:8080) (i think  neutral the Virtual Ethernet adapter!)

SINCE Yesterday the web page mgt is reachable.......i hope continues !!!!!

 

About your question:

Have you had any issue when the wireless devices are connected to the Archer MR200?

n. 2 cameras are conntected at Router wireless without problems !

 

(*) the old router was purchased in January

 

update 17th:

The web page mgt still reachableyes

 

 

 

Best regards

Luciano

:

 

 

 

 

 

 

 

 

2
2
#5
Options
Re:ARCHER MR200 v4 Random i can't access to web management page
3 weeks ago

@Sunshine

Hello,

After c.a.10th days run all very well !

I check every day  the web mgt page (also remotly) and it's always reachable!

 

Now:

According this issue, in the recently past i reset the first router to factory and i reload on it the configuration used currently from this spare router.

 

Question:

Some other suggestion ?

The first router is only 8 months old.....

Thanks very much !

Luciano

 

 

0
0
#6
Options
Re:ARCHER MR200 v4 Random i can't access to web management page
3 weeks ago

@evvivame 

Good day.

Just want to be sure, the new router now runs flawlessly but the previous one with 8 months old is still not accessible via LAN IP address? Both wireless connection and Ethernet cable connection are not?

And did it happen all the time, or still randomly?

The previous one is the same model with same firmware version: Archer MR200(EU)_V4_200526?

Thank you very much!

0
0
#7
Options