BT IPv6 settings on AX11000
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Hello,
I'm trying to set up the AX-11000 to use on BT broadband. I can't seem to get IPv6 working. I've tried the settings I've seen on a BT forum but not having any luck with them. Anyone got any ideas?
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Hello,
Below are some instructions to set up an IPv6 connection on the wireless router:
How to set up IPv6 service for BT/Hyperoptic(UK) on the wireless router
If the connection still fails, please ensure you have activated the IPv6 service with your BT line and all the IPv6 parameters are correct, then verify the information as below:
1. What is your network topology, is it BT modem--AX11000?
2. Is the IPv4 connection on the AX11000 good or not? What is the WAN IP address of it?
3. Is the IPv6 connection type the same as IPv4? What is it?
Thanks.
- Copy Link
- Report Inappropriate Content
Hello,
Below are some instructions to set up an IPv6 connection on the wireless router:
How to set up IPv6 service for BT/Hyperoptic(UK) on the wireless router
If the connection still fails, please ensure you have activated the IPv6 service with your BT line and all the IPv6 parameters are correct, then verify the information as below:
1. What is your network topology, is it BT modem--AX11000?
2. Is the IPv4 connection on the AX11000 good or not? What is the WAN IP address of it?
3. Is the IPv6 connection type the same as IPv4? What is it?
Thanks.
- Copy Link
- Report Inappropriate Content
IPv6 was working on the home hub that this router has replaced.
Connection is to BT/Open Reach modem. BT full fibre 900
IPv4 connection is good
Told to use these settings: IPv4 is PPOE
PPOE
Same account as IPv4
Get IVp6 address non address (can't find the option for this)
prefix delegation enable
obtain DNS automatically no (used Google's) assigned type slaac+RDNSS
Wondering if the problem is the prefix as BT uses 56 and it seems router is only 64.
- Copy Link
- Report Inappropriate Content
To do further analysis and help you to fix it, our engineer will email you later.
Please wait patiently until they contact you.
Thanks for your support and understanding in advance, and have a great day.
- Copy Link
- Report Inappropriate Content
did u manage to get a fix on this?
im just using ipv4 and the IPv6 enabled makes the cpu usage really high even on idle
- Copy Link
- Report Inappropriate Content
@zmulla84 No, couldn't get it to work even after the firmware update. Swapped it for the Asus Rog Ax-11000 which worked perfectly straight away.
- Copy Link
- Report Inappropriate Content
Hi, I found a new document from the TP-Link website, that helps! How to set up IPv6 service for BT/Hyperoptic(UK) on the wireless router https://www.tp-link.com/uk/support/faq/2942/
- Copy Link
- Report Inappropriate Content
Hello, thanks for reporting issues to the community.
What if you disable the IPv6, will the CPU be normal? BTW, how did you monitor the CPU usage on the AX11000?
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 4285
Replies: 7
Voters 0
No one has voted for it yet.