WPA4220 WiFi speed 46Mbps but ethernet is 100Mbps, can it be sped up?

WPA4220 WiFi speed 46Mbps but ethernet is 100Mbps, can it be sped up?
WPA4220 WiFi speed 46Mbps but ethernet is 100Mbps, can it be sped up?
2020-08-11 19:03:23
Model: TL-WPA4220
Hardware Version: V1
Firmware Version: TL-WPA4220(UK)_V1.20_170526

 Hi,

 

I have a ethernet connection going into a WPA4220 that reads as 200Mbps when the cable is plugged directly into my macbook pro (Oolka speed test), however when the cable is plugged into the WPA4220 the WiFI speed only gets about 46Mbps. The other two WPA4220s connected to it via the powerline network also only achieve 46Mbps via WiFi.

 

Interestingly, if I plug in a ethernet cable into the other plug I get 92Mbps from it (guessing WPA4220 only supports 100Mbps), so my assumption is the Wifi settings (or the Wifi itself) isn't right? Is there anyway to change this or do I just have to accept a 50% connection hit on WiFi?

0
0
#1
Options
1 Reply
Re:WPA4220 WiFi speed 46Mbps but ethernet is 100Mbps, can it be sped up?
2020-08-11 19:28:02

@Chriswilson83 I've actually been able to up the speed to 63Mbps by doing the following....

 

-Choosing 11n only

-Changing bandwidth from Auto to 40Mhz

-Enabling AP isolation

 

Better, but still below the ethernet connection, any suggestions?

0
0
#2
Options