Archer C7 AC1750 Log

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Archer C7 AC1750 Log

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Archer C7 AC1750 Log
Archer C7 AC1750 Log
2020-08-18 14:41:02 - last edited 2020-08-22 00:44:03
Model: Archer C7  
Hardware Version: V1
Firmware Version: 3.15.1 Build 141204 Rel.39308n

Hello community,

 

I tried searching for this information but I could only get bits and pieces so I hope someone here knows.  I wanted to know what these meant at the bottom of my log file.

 

Time = 2020-08-18 10:36:09 20539s

H-Ver = Archer C7 v1 00000000 : S-Ver = 3.15.1 Build 141204 Rel.39308n
L = 192.168.2.7 : M = 255.255.255.0
W1 = STATIC IP : W = 3.95.113.154 : M = 255.255.255.0 : G = 3.95.113.154

 

In particular, what is the "W=3.95.113.154" and "G=3.95.113.154"?  I looked it up and it belongs to Amazon Data Services.  If anyone can explain these and point me to a reference for these things it would be much appreciated.

 

Also, I am thinking of buying the AX6000 to replace my old C7.  Do you think this is a good idea?  I chose the AX6000 because someone will share the cost of buying it.  Otherwise, I was going to buy the AX3000.

 

Thanks in advance.

  0      
  0      
#1
Options
1 Accepted Solution
Re:Archer C7 AC1750 Log-Solution
2020-08-19 07:01:35 - last edited 2020-08-22 00:44:03

@link3r 

 

Hello,

 

As per "L = 192.168.2.7  M = 255.255.255.0", L stands for LAN, which is the local Ethernet connection, and M means subnet mask, which will define your network range.

 

W = 3.95.113.154 : M = 255.255.255.0 : G = 3.95.113.154:

W means WAN

M means subnet mask again

G means Default Gateway.

 

The AX6000 should be a good choice, you may compare it with AX3000 as below:

https://www.tp-link.com/ca/compare/?typeId=9&productIds=33888%2C33886

 

Good day.

If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
Recommended Solution
  0  
  0  
#2
Options
2 Reply
Re:Archer C7 AC1750 Log-Solution
2020-08-19 07:01:35 - last edited 2020-08-22 00:44:03

@link3r 

 

Hello,

 

As per "L = 192.168.2.7  M = 255.255.255.0", L stands for LAN, which is the local Ethernet connection, and M means subnet mask, which will define your network range.

 

W = 3.95.113.154 : M = 255.255.255.0 : G = 3.95.113.154:

W means WAN

M means subnet mask again

G means Default Gateway.

 

The AX6000 should be a good choice, you may compare it with AX3000 as below:

https://www.tp-link.com/ca/compare/?typeId=9&productIds=33888%2C33886

 

Good day.

If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
Recommended Solution
  0  
  0  
#2
Options
Re:Archer C7 AC1750 Log
2020-08-22 00:41:33 - last edited 2020-08-22 00:42:44

@Kevin_Z 

 

Thank you for the explanation @Kevin_Z .

 

If W = 3.95.113.154 is my WAN, does it mean that my last address looked at from my browser was Amazon?  It's still the same when I looked at it today.

 

Also, it looks conspicuous that my gateway is also an Amazon IP address.

 

 

  0  
  0  
#3
Options

Information

Helpful: 0

Views: 1064

Replies: 2

Related Articles