****Archer MR600 - 2CA bands Aggregation - New Bands***

****Archer MR600 - 2CA bands Aggregation - New Bands***
****Archer MR600 - 2CA bands Aggregation - New Bands***
2020-08-26 17:41:02 - last edited 2020-09-08 03:57:28
Hardware Version: V1
Firmware Version:

@Sunshine @Kevin_Z  Hello Support,

 

I would ask you to please provide newer 2CA band support for the MR600.

 

2CA_1A-40A , 2CA_3A-41A .

 

Most importantly 2CA_40A-40A  is needed at the earliest.

 

Regards,

~Abhi smiley

Regards, Abhi
1
1
#1
Options
1 Accepted Solution
Re:****Archer MR600 - 2CA bands Aggregation - New Bands***-Solution
2020-08-28 01:18:00 - last edited 2020-09-08 03:57:28

@Abhi093 

Good day.

There is some feedback from other posts. 

We have already reported your feedback to our engineers.

At the same time, please do make sure your sim card carrier supported It too.

For further updated news, I would have a check and come back to you guys.

And if anyone does have the same request, please feel free to post it here.laugh

Best Solution
0
0
#2
Options
50 Replies
Re:****Archer MR600 - 2CA bands Aggregation - New Bands***-Solution
2020-08-28 01:18:00 - last edited 2020-09-08 03:57:28

@Abhi093 

Good day.

There is some feedback from other posts. 

We have already reported your feedback to our engineers.

At the same time, please do make sure your sim card carrier supported It too.

For further updated news, I would have a check and come back to you guys.

And if anyone does have the same request, please feel free to post it here.laugh

Best Solution
0
0
#2
Options
Re:****Archer MR600 - 2CA bands Aggregation - New Bands***
2020-08-28 02:11:48

@Sunshine  hi Sunshine,

 

Thanks for your reply. As per the image its 40C and not 40A+ 40A

Regards, Abhi
2
2
#3
Options
Re:****Archer MR600 - 2CA bands Aggregation - New Bands***
2020-08-28 03:06:45

@Abhi093 

Thank you for your correction.yes

I have already modified it.

You must be very experienced!heart

2
2
#4
Options
Re:****Archer MR600 - 2CA bands Aggregation - New Bands***
2020-08-28 06:52:59

@Sunshine Hi, yes please let the developer know the importance of this, as this is pending from a very long. Thank you.

0
0
#5
Options
Re:****Archer MR600 - 2CA bands Aggregation - New Bands***
2020-08-28 07:53:44

@Sunshine Yes, please provide 40A+40A CA. It is much useful for us in Mumbai, India.

0
0
#6
Options
Re:****Archer MR600 - 2CA bands Aggregation - New Bands***
2020-08-28 20:40:14

@Sunshine Hi, Please find the below screenshot of proof for 2XCA combination support with 40A+40A with 20Mhz+10Mhz and 3A+40A.

It is taken from my old Samsung Galaxy J8 device with 2CA support. I have dialed *#0011# on the dial pad to get the band and CA information from the phone.

 

With 40A+40A with 20Mhz+10Mhz without MIMO working with Airtel provider in Mumbai and this combination is not supported and not working on MR600.

Below is the screenshot. Please implement 40A+40A ASAP in the next firmware with band selection feature.

 

With 3A+40A with 10Mhz+20Mhz without MIMO working with Airtel provider in Mumbai, This combination is working with Airtel on MR600

 

With 40A+40A with 20Mhz+10Mhz without MIMO working with JIO provider in Mumbai and this combination is not supported and not working on MR600.

Below is the screenshot.Please implement 40A+40A ASAP in the next firmware with the band selection feature.

With 3A+5A with 5Mhz+10Mhz without MIMO working with JIO provider in Mumbai, This combination is working with JIO on MR600

 

So, above is the proof which is workign well on my old Samsung J8 phone, request TP-Link support to implement the same ASAP.

 

Many thanks,

Rajiv.

 

 

 

 

 

 

4
4
#7
Options
Re:****Archer MR600 - 2CA bands Aggregation - New Bands***
2020-08-29 03:47:21

@Sunshine please Do provide support for 40A+ 40A CA ... 

0
0
#8
Options
Re:****Archer MR600 - 2CA bands Aggregation - New Bands***
2020-08-30 04:52:48

 

 

@Abhi093 @sunshine Hi TP Link team, Looking forward for 40A + 40A Carrier aggregation support on MR600 v1 . The last beta firmware provided doesnt support the same. Also i believe last beta was released in April 2020, can you release the new beta / general software to support 40A-40A CA?

0
0
#9
Options
Re:****Archer MR600 - 2CA bands Aggregation - New Bands***
2020-08-31 08:05:03

I  could get time to test with Jio SIM which was giving very bad speeds. I mounted a panel Antenna (mimo) 8dbi max gain across bands. .(LPDA didn't work for me) the speed I got today was eye catching. 

With default rabbit ears getting 2 Mbps with band 40.

With External MIMO antenna it's 50 Mbps .

 

@Sunshine did you get any update regarding 2CA_40A+40A from your developers.?? I would also request you to get the below band combinations checked with your developers.these combinations would help other  tp link mr600 users in India (Airtel) who are not in Metros and can benefit from 2CA .  i.e band 2CA_1A+3A and 2CA_1A+40A wherever applicable.

 

Below are my results with an outdoor MIMO with Jio . Tower being 1 km from my location.

 

 

 

Regards, Abhi
0
0
#10
Options
Re:****Archer MR600 - 2CA bands Aggregation - New Bands***
2020-09-03 14:52:45

@Sunshine 

 

Hello Sunshine,

 

Any update on 40A+40A support for TP-Link MR600 . Did you get any news from your developers ?

Regards, Abhi
0
0
#11
Options