Archer MR200 does not recognize Archer C7 as a repeater nor an extender.

Archer MR200 does not recognize Archer C7 as a repeater nor an extender.
Archer MR200 does not recognize Archer C7 as a repeater nor an extender.
2020-09-04 15:52:10 - last edited 2020-09-08 03:20:49
Model: Archer A10
Hardware Version: V4
Firmware Version: 1.17.0 0.9.1 v0001.0 Build 200526 Rel.36799n

I am trying to set up Archer  C7 router to be used as an extender/extender  on  an Archer MR200  router to no avail.  I first tried it wirelessly before  going wired  and in both cases on  Router mode since AP mode does not provide OneMesh capability..and yet and the result remained the same. But based on the logic of how a repeater /an extender operates, this scheme that i am trying to implement should basically go through. 

Both firmwares are up to date. Attached in the description (thread) are the information relative to Archer MR200.

 

Below are the Archer C7's details: 

Firmware version: 1.0.15 Build 20200628 rel.63501(4555) 

Hardware versionArcher C7 v5.0 .

 

Attached are a couple of  pictures that I do hope would give a better understanding of my issue. As one could notice in the pictures , MR200 only lists Archer C7 as a wired client but does not recognized it as  a OneMesh utility, meanwhile on the other hands, Archer C7 does not even list Archer MR200 as a wired client , further more no 

recognition as to being an OneMesh appliance.

All help, advices as well as opinions are highly appreciated.

 

Cheers.

0
0
#1
Options
1 Accepted Solution
Re:Archer MR200 does not recognize Archer C7 as a repeater nor an extender.-Solution
2020-09-08 03:20:22 - last edited 2020-09-08 03:20:49

@moleX 

Good day.

Thank you very much for your kind reply.

You can use a OneMesh™ Wireless Router or Modem Router with several sets of Range Extenders or Powerline Adapters to create a OneMesh™ network. Be aware, you cannot create a OneMesh™ network between two routers.

https://www.tp-link.com/onemesh/

So when Archer MR200 and Archer C7 could not create a OneMesh together.

Thank you very much.

Best Solution
0
0
#2
Options
1 Reply
Re:Archer MR200 does not recognize Archer C7 as a repeater nor an extender.-Solution
2020-09-08 03:20:22 - last edited 2020-09-08 03:20:49

@moleX 

Good day.

Thank you very much for your kind reply.

You can use a OneMesh™ Wireless Router or Modem Router with several sets of Range Extenders or Powerline Adapters to create a OneMesh™ network. Be aware, you cannot create a OneMesh™ network between two routers.

https://www.tp-link.com/onemesh/

So when Archer MR200 and Archer C7 could not create a OneMesh together.

Thank you very much.

Best Solution
0
0
#2
Options