Issue trying to open port s for camera

Issue trying to open port s for camera
Issue trying to open port s for camera
2020-09-28 14:48:30 - last edited 2020-09-29 01:33:27
Hardware Version:
Firmware Version:

Hello,

I have an Archer MR600 at home. It works perfectly in 4G.

 

> I have 4 cameras connected to a recorder (old recorder) AVTECH (avc 794).

The cameras are OK with the recorder and into the local network i can see it with eagle eye app.

 

>I have connected the AVTECH directly to the Archer 600 (cable). The Archer can see it, no pb.

 

> I have set a port inside the AVTECH (80) and activate the server on the TPLINK admin.

I have set for internal and external port "80", the AVTECH IP has be reserved on the device (always the same device IP).

 

It doesn't works, the eagle eye view don't connect.

I know that i don't have a fix IP but it should works if the Archer 600 IP stay the same.

 

 

If someone has any tips around that it would be really nice.

 

 

Ps : I had before a box with a fix IP and it was ok to get the remote view

0
0
#1
Options
1 Accepted Solution
Re:Issue trying to open port s for camera-Solution
2020-09-29 01:33:22 - last edited 2020-09-29 01:33:27

@jmlange 

Hi,  thank you very much for your time and patience.

if you do not have a fixed IP address, you could refer to this link to set up the DDNS:

https://www.tp-link.com/support/faq/2486/

 

and could you please also check the internet IP address on the MR600 to see whether it is a public IP address or not

Since if it is a private one, which means there would be another firewall on the Sim carrier side, you might need to open the port for MR600 on sim carrier as well

 

Thank you very much.

Best Solution
0
0
#2
Options
2 Replies
Re:Issue trying to open port s for camera-Solution
2020-09-29 01:33:22 - last edited 2020-09-29 01:33:27

@jmlange 

Hi,  thank you very much for your time and patience.

if you do not have a fixed IP address, you could refer to this link to set up the DDNS:

https://www.tp-link.com/support/faq/2486/

 

and could you please also check the internet IP address on the MR600 to see whether it is a public IP address or not

Since if it is a private one, which means there would be another firewall on the Sim carrier side, you might need to open the port for MR600 on sim carrier as well

 

Thank you very much.

Best Solution
0
0
#2
Options
Re:Issue trying to open port s for camera
2020-09-29 06:15:58

Thanks for your response !

 

I think i have a public IP but where is it indicated public/private ?

0
0
#3
Options