Wireless clients can't authenticate against ax10 after firmware upgrade

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Wireless clients can't authenticate against ax10 after firmware upgrade

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Wireless clients can't authenticate against ax10 after firmware upgrade
Wireless clients can't authenticate against ax10 after firmware upgrade
2020-10-17 11:17:30 - last edited 2020-11-11 01:53:16
Model: Archer AX10  
Hardware Version: V1
Firmware Version: 1.1.0 Build 20200827 Rel. 40928(4555)

Hello.

 

Wireless clients (phones, laptops) cannot connect to the wifi anymore after the upgrade to the last firmware.

 

I have tried everything, changing wifreles parameters and configuration of the router, forgetting connections and checking wifi settings on the phones, etc (security, encryption, smartconnect, password, ssid names, optimizations and options on the phones) and nothing helped. All devices acted as if something is wrong with the authentication (constant reprompting to enter password on the laptops, sometimes an "authorisation error" on the phones is displayed when new connection is attempted.

The only way any of my devices can connect to wifi is when no security is set on the device (open network, without authentication).

 

Everything worked as expected before the last firmware upgrade. I tried to downgrade it but that's not possible (apparently).

 

I'm desperate for an urgent solution. Please help!

  0      
  0      
#1
Options
1 Accepted Solution
Re:Wireless clients can't authenticate against ax10 after firmware upgrade-Solution
2020-10-28 10:58:25 - last edited 2020-11-11 01:53:16
Hi. I can confirm that resetting the router to the factory defaults and setting back up again solved the issue for me. Before the reset I tried all the security options (and changing the passwords) on both bands, 2.4GHz and 5GHz, and ONLY no-security allowed connection.
Recommended Solution
  2  
  2  
#5
Options
5 Reply
Re:Wireless clients can't authenticate against ax10 after firmware upgrade
2020-10-20 12:25:10
Have you tried a complete reset of the router, press reset button at the back until all lights go off ? Then setting it up from scratch.
  0  
  0  
#2
Options
Re:Wireless clients can't authenticate against ax10 after firmware upgrade
2020-10-28 05:47:37

@Mord 

 

I have the same issue.  Rest does not help.

  0  
  0  
#3
Options
Re:Wireless clients can't authenticate against ax10 after firmware upgrade
2020-10-28 07:56:01

@DMiloje    @Solomyr 

 

Hi, thanks for reporting the issue to the community.

 

Can you please confirm if the devices are connecting to the 2.4GHz or 5GHz network? Have you tried to change the wireless security to WPA2-PSK AES?

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer BE550 New Software Enhances System Stability and Optimizes MLO Network Stability. If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
  0  
  0  
#4
Options
Re:Wireless clients can't authenticate against ax10 after firmware upgrade-Solution
2020-10-28 10:58:25 - last edited 2020-11-11 01:53:16
Hi. I can confirm that resetting the router to the factory defaults and setting back up again solved the issue for me. Before the reset I tried all the security options (and changing the passwords) on both bands, 2.4GHz and 5GHz, and ONLY no-security allowed connection.
Recommended Solution
  2  
  2  
#5
Options
Re:Wireless clients can't authenticate against ax10 after firmware upgrade
2020-11-11 01:52:58

@DMiloje 

 

Hello, glad to hear that it works, congrats.^_^

 

If need any further help, just let us know.

 

Good day~

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer BE550 New Software Enhances System Stability and Optimizes MLO Network Stability. If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
  0  
  0  
#6
Options

Information

Helpful: 0

Views: 947

Replies: 5

Related Articles