New Archer MR600 BSNL 3G No Signal Problem
I can able to Manually Select Two Bands in my 4G Simcards,
When i Insert BSNL 3G Network Simcard, It is Showing No Signal, Signal Strength is 0
Please Help me Mean while In my Other Devices Receiving 3 to 5 Signal Bars In Same Place,
Why I Unable to Use BSNL 3G Network,
Even in Manual Serach it only Detects Vodafone 3G Network..?
Why Pls Some One Help Me Sir..
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Thank You For Your Suggestion,
I Foud Out When I Tested Outside Home It Give Signal Strength 100%,
and It Gets RSSI = -67 dBm And It Connects to Band 1 and Working Normal Today,
If I Rise the Device About Celing Level It Receiving Signal Strength 25% and RSSI = -107 dBm and No Internet Connection.
Please See the ScreenShot Attached Sir.
Please Suggest Me Is My Device Antenna is Weak or Device Weak,
- Copy Link
- Report Inappropriate Content
Sir
When I Testing Inside Home It is Behaving Worst, Singla Strength 0
and Nothing Else When I Placing in Table,
Where As My Mobile Please See the Attachment Sir
Where is the Problem Is My Network or TP-Link Archer MR600 Provided Antennas are Defective...?
- Copy Link
- Report Inappropriate Content
For 4G Networks It Gives What I Expected Sir,
Speed is Decent,
Signal Stength : 100%
RSRP: -69 dBm
RSR: -7dB
SNR: 18.8dB
Please Tell Me The Attached Antenna is Working Properly or Not..
How To Get Good Signal in BSNL 3G Sir
- Copy Link
- Report Inappropriate Content
Good day,
Thank you very much for your time and patience.
Sorry for the delay.
Did you say that, only when it was put outside could the LTE signal get 100%; once put inside, LTE signal would drop to 0% no matter on 4G network or 3G?
Have you tried to factory reset the Archer MR600 to have a look?
How long have you had the Archer MR600 and did the issue start out of the box?
Thanks a lot.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 1591
Replies: 5
Voters 0
No one has voted for it yet.