My TL-PA8015P KIT is stuck in power saving mode

My TL-PA8015P KIT is stuck in power saving mode
My TL-PA8015P KIT is stuck in power saving mode
2021-02-20 14:08:34
Model:Adapter
Hardware Version: V2
Firmware Version:

Hello,

 

I have a TL-PA8015P KIT. One of them is working normally, but the other one is unable to quit the power saving mode.

It is not recognized by tpCPL.

I tried to pair again the two adapters (1 second press) : fail
I tried to reset the faulty CPL (6 seconds press) : no effect, the LED is always blinking slowly

So I have no network.

 

Thanks in advance for your help

 

Best regards

0
0
#1
Options
1 Reply
Re:My TL-PA8015P KIT is stuck in power saving mode
2021-02-23 09:49:11

@Westman49 For a full factory reset, you'll probably need to hold the button for way longer than six seconds. Just hold it until you see a reaction on the LEDs.

 

I'd give up after a minute though; next thing to try would then be recovery over LAN.

0
0
#2
Options