No Wired clients vissible in Omada with TL-R605
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.No Wired clients vissible in Omada with TL-R605
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
i have my omada SDN software controller on Windows (version 4.2.11). it works with 2 eap245 and 1 eap225-outdoor and a TL-R605.
But in my clients list i can only see the most clients which are connected bij WiFi. De wired clients are not there.
What can i do about this?
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Dear @Anconakip,
i have my omada SDN software controller on Windows (version 4.2.11). it works with 2 eap245 and 1 eap225-outdoor and a TL-R605.
But in my clients list i can only see the most clients which are connected bij WiFi. De wired clients are not there.
Recently the TL-R605 has released a new firmware which fixes some problems, see HERE.
Please check the current firmware of your TL-R605 and ensure it's running the latest firmware first.
If the problem still exists, please provide a network diagram and check if the wired clients are showing as wireless clients.
- Copy Link
- Report Inappropriate Content
No ,sorry. Yes there are some wired clients now. But not all. A lot of wired (and some wireless) devices are still not vissible.
- Copy Link
- Report Inappropriate Content
Dear @Anconakip,
No ,sorry. Yes there are some wired clients now. But not all. A lot of wired (and some wireless) devices are still not vissible.
Thank you for sharing the results. To do further investigation, could you please draw a network diagram showing how the devices(including APs, Switch and wired clients) are connected in your network?
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Dear @Anconakip,
To verify, are those 4 switches all non-Omada switches?
Are the clients actually getting IP addresses from the R605 router but just not showing up on the Clients list?
Does the issue exist on some special clients or random clients?
- Copy Link
- Report Inappropriate Content
the switches are 3 x Netgear ProSafe Gigabit and 1 TP-Link TL-SG108PE. This last one gets an IP from the TL-R605 but is not vissible in de omada software.
At this moment i can see a lot more clients (also wired ) in the software, but not all.
All clients in my network are getting the ip's from the TL-R605. This is my dhcp server.
- Copy Link
- Report Inappropriate Content
@Anconakip I have the same problem, have you get a solution?
- Copy Link
- Report Inappropriate Content
@IAguirre after the last update of the tlr605 i can see all my clients. I have no problems at this moment.
- Copy Link
- Report Inappropriate Content
@Anconakip Thank you for the reply, i got the last update 1.8.0 Build 20210406 Rel.58757 on the omada controller and 1.1.1 on my ER605, is the same you have?
- Copy Link
- Report Inappropriate Content
@IAguirre i have no omada controller. I have the omada software on a windows server.
But the version of the tlr605 is the same.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 3348
Replies: 11
Voters 0
No one has voted for it yet.