Setting up
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Hi all,
Apologies but complete novice here. Just had delivered the tp link wireless n router and want to put it in my shed in the garden using a cat 6 cable from my house router. Do I set it up as an access point and if so do I set the IP address the same as my home router?
Thanks in advance
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Hey
If you are going to cable it in then Yes. set it in Access Point Mode. However.. dont use the same IP as your router
Its likely your router will give the AP an address anyways (something like 192.168.0.12) and that will be fine, however if you are going to set this manually set it close to, but not the same as the router.
EG.. Say router is 192.168.1.1 set AP as 192.168.1.2 - Basically change the last number!
hope that helps
- Copy Link
- Report Inappropriate Content
Hey
If you are going to cable it in then Yes. set it in Access Point Mode. However.. dont use the same IP as your router
Its likely your router will give the AP an address anyways (something like 192.168.0.12) and that will be fine, however if you are going to set this manually set it close to, but not the same as the router.
EG.. Say router is 192.168.1.1 set AP as 192.168.1.2 - Basically change the last number!
hope that helps
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
On the AP you want it to ideally be a DHCP client (automatically get an address from the router), hopefully that is what you mean.. Just leave it :)
If it gets an address from the router automatically, then anything connected to it will also.. be easier for you
- Copy Link
- Report Inappropriate Content
Great stuff, one more silly question 🙄.
Do I take my cat 6 lead from the WAN port on my house router or just from an ethernet port?
Sorry for the questions
- Copy Link
- Report Inappropriate Content
Just an ethernet port for the AP.
The WAN port is for connecting to a Modem or Router for internet access
Dont worry mate, there are no silly questions.
- Copy Link
- Report Inappropriate Content
Thank you pal, appreciate your help 👍
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 990
Replies: 7
Voters 0
No one has voted for it yet.