IPv6 inbound traffic blocked ?

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

IPv6 inbound traffic blocked ?

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
IPv6 inbound traffic blocked ?
IPv6 inbound traffic blocked ?
2021-03-24 14:10:20
Model: Archer A20  
Hardware Version: V1
Firmware Version: 1.2.0 Build 20200929 rel.54838(4555)

Hello all,

 

I've setup IPv6 network on my AX1800 router according to info from my ISP (see below). I can reach from my home devices to IPv6 Internet without issues. However when I want to reach any device that is behind my router FROM internet (for example from http://www.ipv6now.com.au/ or http://www.ipv6scanner.com/cgi-bin/main.py ), it fails. Cannot ping, cannot reach opened port from internet.

 

I CAN reach both external and internal router's IP from internet, but not any device in LAN that has been assigned IPv6 from router.

Key question: can AX1800 route inbound traffic from internet to LAN network ? Lets keep in mind, we don't have NAT anymore in IPv6 world....

 

Details:

 

IP provided by ISP for my router's WAN interface : 2a0b:e7c0:0:3::c

address prefix that my router should distribute to LAN clients: 2A0B:E7C0:0:11C::/64   (this info was also provided by ISP)

So my LAN devices, that I want to be publicly reachable from internet are for example 2A0B:E7C0:0:11C:423F:8CFF:FE77:CD01

  0      
  0      
#1
Options
2 Reply
Re:IPv6 inbound traffic blocked ?
2021-03-24 16:59:09

@Bitterman 

 

Refer to this thread.

If this was helpful click once on the arrow pointing upward. If this solves your issue, click once the star to mark it as a "Recommended Solution".
  0  
  0  
#2
Options
Re:IPv6 inbound traffic blocked ?
2021-03-24 17:38:12

@terziyski : thanks ! I try to follow that guideline....

  0  
  0  
#3
Options