Future Consideration Feature Request - Guest Network separate DHCP/DNS settings
Hi @TP_LINK,
I've had rock solid performance so far, and do like the Deco Labs options (although the Wifi Interference check results show 'low' then say underneath that there is significant interference), I do, however, have a feature request to put forward.
My use case:
- 3 x Deco M5s in Router mode
- Several wired and many wireless devices on the main network
- Several wireless devices on the guest network (my work devices)
- DHCP is handled by the Deco, and DNS is served by another server on the main network.
If I set the DNS to only have the DNS server, both the main and guest network use these settings. This causes the guest network to fail as it is segregated from the main network where the DNS server resides.
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
@matoB I don't understand why people keep posting on this thread. They haven't fixed the issue in over five years, and this problem was known to them even before COVID. Due to their poor support, I ended up getting rid of all my TP-Link hardware, which I found to be mediocre at best. Despite the impressive stats, it never fully delivers. For example, my router struggled to handle more than 50 devices, and anything above that would cause random disconnects. This issue started after the latest firmware update, which I reported, but their response was indifferent.
I switched to ASUS routers, and now I have up to 80 devices connected with no issues. It handles everything I need, including DNS for the guest network.
TP-Link products are cheap for a reason. Unfortunately, I learned this the hard way, just like many of you.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Currently, the BE63 is a power user device and this feature is needed for power users.
I don't really know why this is taking so long to implement as it has been requested years before I got a BE63. Either let us specify different DNS settings for the Guest and IoT network so we can specify non-local DNS addresses for guest networks, or allow DNS, DoH DoT,, etc.over local networks.
As it sits, the guest network does not work and the guest feature cannot be used for any networks that use a local DNS server.
This is definitely a bug. Power users are essential to get word of mouth and goodwill for your product, and right now, this BUG is definitely not wanting me to recommend this product to anyone.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Was hopeful given the latest firmware release stated:
7. Fixed the issue that the Guest wireless may be unable to access the Internet in some cases.
per v 1.1.0 https://www.tp-link.com/us/support/download/deco-be11000/#Firmware
But I just tested re-enabling my pi-hole server (using the Deco DHCP settings as required) and still no dice :(
- Copy Link
- Report Inappropriate Content
@thatvirtualboy This feature request was created on 2021-03-31. G'luck bro. lol
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Information
Helpful: 137
Views: 32375
Replies: 198
Voters 126
