Manual Band Selection for TL-MR6400 v2

Manual Band Selection for TL-MR6400 v2
Manual Band Selection for TL-MR6400 v2
2021-03-31 09:58:38 - last edited 2021-03-31 10:58:37
Model: TL-MR6400
Hardware Version: V2
Firmware Version: 1.0.19 Build 181219 Rel.59200n

Hey 👋

 

I'm getting totally different speeds during the day: from 1Mbps to 60Mbps.

The low speeds (and super high latency) usually happens when the signal strength is 25%

If I reboot the modem, the sinal strength increases to 75% and I get around 60Mbps

After some time, it gets back to 25%

 

I'm confident this happens because the router fallbacks to another band.

 

So, is there a way to force the router to a specific band?

 

I know you released this feature for the

v3: https://community.tp-link.com/en/home/forum/topic/232022

v4: https://community.tp-link.com/en/home/forum/topic/223304

v5: https://community.tp-link.com/en/home/forum/topic/257400 

 

Can you please also release the firmware for the v2?

 

Thank you

 

1
1
#1
Options
3 Reply
Re:Manual Band Selection for TL-MR6400 v2
2021-11-06 15:12:23
yes pls did anyone find a solution for this problem? i also have the MR6400 V2
0
0
#2
Options
Re:Manual Band Selection for TL-MR6400 v2
2021-11-15 12:50:14
Hello ... I have the same problem. In my area there are 4 bands form my 4G provider ... and there are large differences of bandwidth. I have a Huawei router and I can lock one of these bands an I have 40/40 ... and with the tplink TL-MR6400 v2 only have 25 because the HW I can lock at 1800 band. Thank you
0
0
#3
Options
Re:Manual Band Selection for TL-MR6400 v2
2022-01-23 20:46:31

@Sunshine @TP-Link  Hello please provide us with "Band Selection" in beta software asap, for MR6400 v2   thank you 

0
0
#4
Options