VLAN
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
I recently purchased the AX1800 Dual Band Wi-Fi 6 Router:
- Hardware Version: Archer AX21 v1.20
- Firmware Version: 1.2.1 Build 20201202 rel.76564 (5553)
I want to configure three (3) VLANs. For example,
VLAN1 IP 192.168.0.1
VLAN2 IP 192.168.1.1
VLAN2 IP 192.168.2.1
Where can I do this configuration?
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
The AX21 doesn't support the VLAN settings as you required, it only supports VLAN settings for the IPTV or VoIP services, you can check the instructions below:
- Copy Link
- Report Inappropriate Content
The AX21 doesn't support the VLAN settings as you required, it only supports VLAN settings for the IPTV or VoIP services, you can check the instructions below:
- Copy Link
- Report Inappropriate Content
hi, if i am not mistacking i didnt seen tplink router with multiple lan connection, ax6000 has a link aggregation for link2 and link3 , shown in advance mode at LAN settings.
if i understand good u which to create a network with 3 Local Area Network(LAN), generally u need to study how to create a network
u need a main router or modem, to which u can connect the other 2 or 3 routers, where the router LAN settings is set to the first router IP
x.x.0.1 then at DHCP u can set the second router output LAN and WAN address... as x.x.1.0,
i dont seen that is business with the router.
- Copy Link
- Report Inappropriate Content
@Kevin_Z Thanks for answering.
- Copy Link
- Report Inappropriate Content
@albione Thanks for answering. I'm going to try connecting another router. Thanks again.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 3043
Replies: 4
Voters 0
No one has voted for it yet.