EAP235-wall still not working properly, now on VLAN DHCP transport
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
We still have trouble with our new EAP235-wall.
Lukily we bought just one to try and didn't replace directly all of our old eap115-wall/eap225-wall.
We learned already that the new chip-set is not capable of showing the division between Rx Frames/Tx Frames/Interference/Free at the utilization monitoring.
Thats really sad but unfortunately unfixable and somehow bareable.
https://community.tp-link.com/en/business/forum/topic/264408
We got the hint from the support, that your problems with high rate of dropped tx packages might be just due to wrong counting and won't affect the performance.
Also not nice for troubleshooting but okay.
Now we had to recognize a new and way more serious problem:
The AP fails to deliver the IP-Address handed by our DHCP to the client on VLAN 200
The request is answered by the DHCP but never reach the client.
All switches are configured correctly, all other AP (even if connected to the same port) are working correctly.
Even if we tag the DownLink ports of the EAP235-wall to these VLANs the connected client receives the IP but not on WIFI 5G nor 2,4G
Hey
Even if we tag the DownLink ports of the EAP235-wall to these VLANs the connected client receives the IP but not on WIFI 5G nor 2,4G
Perhaps you have already done this, but you indicated you have tagged the VLAN on the ports of the switch? Is that correct? Did you also tag the VLAN on the SSID itself? It sounds like the SSID is going as untagged onto a tagged network which likely wont work
