TL-MR100 no internet, web config down
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.TL-MR100 no internet, web config down
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Hi Crew,
I have a TL-MR100 that has died on me. Was happily working away and it has recently has dropped its internet connection. I have confirmed the SIM card is still active.
The device has been factory reset using the reset/wps button on the back.
- The device powers on as usual. Power LED flashes before the wireless and Ethernet LEDs come up.
- I CAN log into the default wifi, or access via Ethernet. Both result in a DHCP address being given out, but neither result in internet access.
- I CAN ping the device on the default IP (192.168.1.1)
- A port scan indicates the only open port is port 80 on the device, but I can't connect to it.
- I CAN NOT log into the web management portal using either "tplinkmodem.net" or by entering the IP address into the browser
- I CAN access the CLI by starting a telnet session on port 23. I was originally asked to set a password which I have done.
- I have tried a number of IPs on my PC with TFTP server running, and can't get the device to attempt to pull a file (I suspect it's not capable)
Do I have a fancy paperweight? Any suggestions greatly appreciated!
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Hello @Sunshine
Am also facing the same problem, what ever I tried am not able to access the web page of router. It was working fine with 4G sim card and suddenly no internet, I've tried all the suggestions in this page and others also , still not able to access the web page of router,
Please help me to get the router working.
- Copy Link
- Report Inappropriate Content
Hi, may I know if your MR100 is V1.0 or V1.20? you could check it on the bottom label, and did you update firmware to the latest version before the problem happened?
In addition, if factory reset cannot resolve the issue either, it is recommanded to contact the retailer where you bought it to check warranty and get it replaced.
- Copy Link
- Report Inappropriate Content
I have the same problems. Ping and telnet work. Only internet and web config don't work. Any solution?
- Copy Link
- Report Inappropriate Content
Hello,
I have exactly the same problem described in the original post. My device version is EU/1.0. I could not upgrade the firmware since it is not possible via the CLI and the web interface is unreachable.
I could extract the following information from CLI with the "dev version" command:
softwareVersion=1.2.0 0.9.1 v0001.0 Build 200617 Rel.36021n
Regards, Z.
- Copy Link
- Report Inappropriate Content
Hey guys!
Have you managed to remedy this issue?
I have the same problem. No mobile connection, can not access web interface. Wifi & lan access works, got IP address with DHCP, can ping the default address 192.168.1.1, telnet port open, can log in, but can not perform further configuration via CLI, can not upgrade firmware or anything else.
Since it is not a single case, but multiple customers having same issue, isn't there a solution from the vendor?
Please advise!
TP-Link(conf)#dev show prodVer
cmd:SUCC:X_TP_DevModelVersion=1.0
TP-Link(conf)#dev show prodName
cmd:SUCC:modelName=TL-MR100
TP-Link(conf)#dev version
cmd:SUCC:softwareVersion=1.2.0 0.9.1 v0001.0 Build 200617 Rel.36021n
- Copy Link
- Report Inappropriate Content
It needs a hardware fix. See my blog:
https://blog.danman.eu/fixing-broken-tp-link-tl-mr100/
- Copy Link
- Report Inappropriate Content
great resource here
https://blog.danman.eu/fixing-broken-tp-link-tl-mr100/
- Copy Link
- Report Inappropriate Content
Information
Helpful: 10
Views: 8931
Replies: 17
Voters 1
