Home Network Community > 3G/4G Routers/MiFi > problem with connecting xiaomi devices to router mr600
< 3G/4G Routers/MiFi

problem with connecting xiaomi devices to router mr600

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

problem with connecting xiaomi devices to router mr600

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
problem with connecting xiaomi devices to router mr600
problem with connecting xiaomi devices to router mr600
2022-01-01 15:08:26 - last edited 2022-01-04 01:13:52
Model: Archer MR600  
Hardware Version: V2
Firmware Version: 1.5.0 0.9.1 v0001.0 Build 210914 Rel.59719n

Hi all
i am trying to connect to my mr600 xiaomi home smart devices one is smart hub v3 and camera 360 1080p. neither of them are not working with the router and in xiaomi home  app network compatible cannot be founded. Any one has similar issue  ? I'll try to force wpa2 personal but there is no option in the router to set this only. only is WPA/WPA2 PSK or WPA2/WPA3 PSK. By the way 2.4ghz and 5ghz networking is splitted in to diffrent network.

Please if any one has any solution for fix it i will be glad for that.
 

  0      
 
  0      
 
#1
Options
4 Reply
Re:problem with connecting xiaomi devices to router mr600
2022-01-02 10:48:34 - last edited 2022-01-04 01:13:52

@rbodych 

 

If you can't see them on Auto then set to WPA/WPA2 PSK (AES). Smart Connect should be OFF.

Try setting MR600 on channel 1, 6 or 11 if still can't see the Xiaomi devices and test again.

If this was helpful click once on the arrow pointing upward. If this solves your issue, click once the star to mark it as a "Recommended Solution".
  0  
  0  
#2
Options
Re:problem with connecting xiaomi devices to router mr600
2022-01-02 12:31:18 - last edited 2022-01-04 01:13:52

@terziyski unfortunatly is not working also WPA2/WPA3 tried.  TKIP tested too

  0  
  0  
#3
Options
Re:problem with connecting xiaomi devices to router mr600
2022-01-03 00:50:41 - last edited 2022-01-04 01:13:52

@rbodych 

 

To rule out wireless interference issue, scan the 2.4GHz band around you with this software and select the least crowded wireless channel:

https://www.metageek.com/products/inssider/

Also mind the distance between Xiaomi devices and your MR600 when trying to connect them.

Do you have other devices that behave the same or you experiencing this issue only with these two ?

 

If this was helpful click once on the arrow pointing upward. If this solves your issue, click once the star to mark it as a "Recommended Solution".
  0  
  0  
#4
Options
Re:problem with connecting xiaomi devices to router mr600
2022-01-03 11:40:48 - last edited 2022-01-04 01:13:52

@terziyski only xiaomi smart devices i have that issue with smart hub gateway and webcam. other smart gadget like tuya zigbee gateway and sensors are working fine.

i have a lot wifi networks around me maybe this is the issue, also i saw that around me there are other xiaomi devices in the flat. i will try with other phone to connect.

  0  
  0  
#5
Options

Information

Helpful: 0

Views: 996

Replies: 4

About Us
Press
Copyright © TP-LINK CORPORATION PTE. LTD. All rights reserved.