Using WAN as a backup for 3G/4G connection

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Using WAN as a backup for 3G/4G connection

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Using WAN as a backup for 3G/4G connection
Using WAN as a backup for 3G/4G connection
2022-05-08 14:10:12
Model: Archer MR600  
Hardware Version: V2
Firmware Version:

Hi,

 

Having an Archer MR600 that we use offshore/nearshore. Offshore satellite connections are dead slow, however 4g/3g are not always available. 

 

Is there a way of configuring the MR600 such that the primary service is the 3g/4g connection, and if the signal is lost it switches to the backup WAN connection comning from the satelite? 

 

In other words. the other way around compared to Wifi router mode where SIM card is the backup for a WAN connection. 

 

Br

Stian

  0      
  0      
#1
Options
1 Reply
Re:Using WAN as a backup for 3G/4G connection
2022-05-09 01:29:35

  @Sbaa 

Hi, thank you very much for the feedback.

Sorry for that there is no Ethernet WAN backup under 3G/4G Router mode on the MR600, we will record your suggestion and feedback to related department for future consideration.

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer BE550 New Software Enhances System Stability and Optimizes MLO Network Stability. TL-WA3001 Supports EasyMesh, Speed Limit, Guest Network in AP Mode and/or Multi-SSID Mode. If you found the post or response helpful, please click Helpful. If an answer solves your problem, click "Recommended Solution" so that others can benefit from it.
  0  
  0  
#2
Options