Archer C7 v5.0 WPA Enterprise Radius accounting configuration

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Archer C7 v5.0 WPA Enterprise Radius accounting configuration

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Giulioo

2022-06-03 15:00:22 - last edited 2022-10-13 08:56:09

Posts: 2

Helpful: 0

Solutions: 0

Stories: 0

Registered: 2022-06-03

Archer C7 v5.0 WPA Enterprise Radius accounting configuration

2022-06-03 15:00:22 - last edited 2022-10-13 08:56:09

Model: Archer C7

Hardware Version: V5

Firmware Version: 1.1.0 Build 20201120 rel.50406

Hello,

during the setup of the wireless SSID with WPA2 Enterprise, i found on the config parameter the Radius Server IP ADDRESS and the Radius Authentication Port (1812). No mention about the Radius Accounting Port (usually 1813). Is there any way to config it?

Thanks

Giu

1 Accepted Solution

woozle

LV5

2022-06-03 18:17:48 - last edited 2022-10-13 08:56:09

Posts: 2779

Helpful: 1859

Solutions: 473

Stories: 0

Registered: 2020-05-01

Re:Archer C7 v5.0 WPA Enterprise Radius accounting configuration-Solution

2022-06-03 18:17:48 - last edited 2022-10-13 08:56:09

@Giulioo

Hi,

If there are no dedicated entry fields for configuring the parameters for a RADIUS Accounting Server in the router's configuration webGUI, then there is no way to do it, I am afraid.

By the way, I checked this on my own routers and apart from one router on which I installed OpenWrt, none of my other routers allows to set parameters for a RADIUS Accounting Server, so it appears this is something that isn't commonly available on home-grade Wi-Fi routers.

Archer C7 v5.0 WPA Enterprise Radius accounting configuration

Archer C7 v5.0 WPA Enterprise Radius accounting configuration

Information

Voters 0

Tags