NAT Type
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
NAT Type
Tags:
#Port Forwarding
#NAT
I am having an Xbox One X with a wireless connection to it. And I am getting my NAT type to be strict, how to make my NAT type 'Open' ?
I will be glad to receive help from others 👍🏻
Re:NAT Type
First make sure that your external IP address is the same as your AX10 Internet IP address:
If they are different or you're receiving a private IP address on your AX10 Internet IP address then you have a double NAT.
That means you have an ISP modem/router before the AX10 or your ISP is using CG-NAT.
I this case you need to re-configure the ISP modem/router or contact your ISP.
If both IP addresses match use these instructions to set UPnP on AX10.
If that still doesn't help, open these ports manually to connect to the Xbox network:
- Port 88 (UDP)
- Port 3074 (UDP and TCP)
- Port 53 (UDP and TCP)
- Port 80 (TCP)
- Port 500 (UDP)
- Port 3544 (UDP)
- Port 4500 (UDP)
After opening these ports you should be able to have an Open NAT.
If this was helpful click on the arrow pointing upward to make it blue.
If this solves your issue, click the star to make it blue and mark the post as a "Recommended Solution".