<
WiFi
EAP650(Eu) V1 - Lower throughput on tagged VLAN SSIDs
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.EAP650(Eu) V1 - Lower throughput on tagged VLAN SSIDs
Posts: 15
Helpful: 3
Solutions: 1
Stories: 0
Registered: 2022-07-15
2022-07-15 17:41:15
Posts: 15
Helpful: 3
Solutions: 1
Stories: 0
Registered: 2022-07-15
EAP650(Eu) V1 - Lower throughput on tagged VLAN SSIDs
2022-07-15 17:41:15
Tags:
#VLAN & Multi-Networks
Hello
I've recently acquired 2 EAP650 to deploy and replace another WiFi system.
While testing the configuration I've come to the issue that the SSIDs that are on tagged VLANs have much lower throughput.
SSID with no VLAN tag(ID 1), guest not enabled: ~500Mbps to WAN
SSID with VLAN tag (ID3), guest not enabled: ~140Mbps
Tried both with OFDMA enabled / disabled, issue persisted.
Connection is as follows:
OPNsense (Firewall, Router) - > Port#1 of Switch TL-SG105E (VLAN1 port 1-5 untagged, VLAN 3 port 1 and 5 tagged PVID 1, port 2 untagged PVID 3) -> EAP650 (Switch Port #5)
PC on Port#2 of switch for cross check.
PC connected directly via switch on port#2 throughput is as expected, ~500Mbps.
EAP directly on Router/Firewall, issue persists.
The Omada controller is running on a LXC container.
Could this be a firmware issue? I saw another thread regarding TCP protocol issues on 650/653 and 670 EAPs. Any update in the works that could be shared to test?
Hopefully this is not an hardware issue, because in that case I'd have to return both EAPs.
#1
Options
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Thread Manage
Announcement Manage
7 Reply
Posts: 20
Helpful: 15
Solutions: 1
Stories: 0
Registered: 2022-01-18
Re:EAP650(Eu) V1 - Lower throughput on tagged VLAN SSIDs
2022-07-15 17:49:14
@s0x Hello,
I'm getting approx 670 Mbps on tagged SSID both upload and download speed on 80 MHz wide channel at 5 GHz 802.11ax at EAP653 with last (1.0.1) firmware.
Do you have latest firmware? Try iperf between your Wi-Fi device and local wired device.
0
We appreciate your feedback. Feel free to let us know more. Log in to submit feedback.
0
We appreciate your feedback. Feel free to let us know more. Log in to submit feedback.
#2
Options
- Copy Link
- Report Inappropriate Content
Thread Manage
Announcement Manage
Posts: 15
Helpful: 3
Solutions: 1
Stories: 0
Registered: 2022-07-15
Re:EAP650(Eu) V1 - Lower throughput on tagged VLAN SSIDs
2022-07-16 00:13:39
@jrypacek Hi
Yes, it's on latest firmware currently publicly available, 1.0.3 Build 20220316 Rel. 51972.
I did test with both a 2Gbit LAG and Single 1Gbit port from switch to router/firewall. On all the situations the Wi-Fi client was connected to 5GHz, configured for 80Mhz.
SSID with no VLAN TAG (ID: 1), from Wi-Fi client to Wired client:
PS C:\> iperf3.exe --client 10.70.70.100 Connecting to host 10.70.70.100, port 5201 [ 5] local 10.70.70.103 port 59181 connected to 10.70.70.100 port 5201 [ ID] Interval Transfer Bitrate [ 5] 0.00-1.00 sec 72.0 MBytes 603 Mbits/sec [ 5] 1.00-2.00 sec 74.1 MBytes 621 Mbits/sec [ 5] 2.00-3.00 sec 76.4 MBytes 640 Mbits/sec [ 5] 3.00-4.00 sec 78.0 MBytes 655 Mbits/sec [ 5] 4.00-5.01 sec 76.1 MBytes 636 Mbits/sec [ 5] 5.01-6.00 sec 74.4 MBytes 627 Mbits/sec [ 5] 6.00-7.00 sec 79.4 MBytes 666 Mbits/sec [ 5] 7.00-8.01 sec 79.2 MBytes 661 Mbits/sec [ 5] 8.01-9.00 sec 74.0 MBytes 622 Mbits/sec [ 5] 9.00-10.00 sec 80.6 MBytes 676 Mbits/sec - - - - - - - - - - - - - - - - - - - - - - - - - [ ID] Interval Transfer Bitrate [ 5] 0.00-10.00 sec 764 MBytes 641 Mbits/sec sender [ 5] 0.00-10.05 sec 763 MBytes 637 Mbits/sec receiver iperf Done.
PS C:\> iperf3.exe --client 10.70.70.100 -u -b 0 Connecting to host 10.70.70.100, port 5201 [ 5] local 10.70.70.103 port 56941 connected to 10.70.70.100 port 5201 [ ID] Interval Transfer Bitrate Total Datagrams [ 5] 0.00-1.00 sec 46.2 MBytes 388 Mbits/sec 33200 [ 5] 1.00-2.00 sec 44.3 MBytes 372 Mbits/sec 31830 [ 5] 2.00-3.00 sec 42.0 MBytes 352 Mbits/sec 30180 [ 5] 3.00-4.00 sec 44.8 MBytes 376 Mbits/sec 32200 [ 5] 4.00-5.00 sec 46.8 MBytes 393 Mbits/sec 33620 [ 5] 5.00-6.00 sec 45.5 MBytes 382 Mbits/sec 32700 [ 5] 6.00-7.00 sec 44.0 MBytes 369 Mbits/sec 31630 [ 5] 7.00-8.00 sec 45.8 MBytes 384 Mbits/sec 32860 [ 5] 8.00-9.00 sec 46.6 MBytes 391 Mbits/sec 33480 [ 5] 9.00-10.00 sec 46.2 MBytes 388 Mbits/sec 33190 - - - - - - - - - - - - - - - - - - - - - - - - - [ ID] Interval Transfer Bitrate Jitter Lost/Total Datagrams [ 5] 0.00-10.00 sec 452 MBytes 379 Mbits/sec 0.000 ms 0/324890 (0%) sender [ 5] 0.00-10.05 sec 452 MBytes 378 Mbits/sec 0.056 ms 0/324890 (0%) receiver iperf Done. PS C:\> iperf3.exe --client 10.70.70.100 -b 1K Connecting to host 10.70.70.100, port 5201 [ 5] local 10.70.70.103 port 59900 connected to 10.70.70.100 port 5201 [ ID] Interval Transfer Bitrate [ 5] 0.00-1.01 sec 128 KBytes 1.04 Mbits/sec [ 5] 1.01-2.01 sec 0.00 Bytes 0.00 bits/sec [ 5] 2.01-3.01 sec 0.00 Bytes 0.00 bits/sec [ 5] 3.01-4.00 sec 0.00 Bytes 0.00 bits/sec [ 5] 4.00-5.01 sec 0.00 Bytes 0.00 bits/sec [ 5] 5.01-6.01 sec 0.00 Bytes 0.00 bits/sec [ 5] 6.01-7.01 sec 0.00 Bytes 0.00 bits/sec [ 5] 7.01-8.01 sec 0.00 Bytes 0.00 bits/sec [ 5] 8.01-9.01 sec 0.00 Bytes 0.00 bits/sec [ 5] 9.01-10.01 sec 0.00 Bytes 0.00 bits/sec - - - - - - - - - - - - - - - - - - - - - - - - - [ ID] Interval Transfer Bitrate [ 5] 0.00-10.01 sec 128 KBytes 105 Kbits/sec sender [ 5] 0.00-10.01 sec 128 KBytes 105 Kbits/sec receiver iperf Done.
SSID with no VLAN TAG (ID: 1), from Wi-Fi client to Wired client, on LAG port:
PS C:\> iperf3.exe --client 10.70.70.100 Connecting to host 10.70.70.100, port 5201 [ 5] local 10.70.70.103 port 59193 connected to 10.70.70.100 port 5201 [ ID] Interval Transfer Bitrate [ 5] 0.00-1.00 sec 76.1 MBytes 637 Mbits/sec [ 5] 1.00-2.00 sec 81.4 MBytes 683 Mbits/sec [ 5] 2.00-3.00 sec 83.6 MBytes 702 Mbits/sec [ 5] 3.00-4.00 sec 81.8 MBytes 684 Mbits/sec [ 5] 4.00-5.01 sec 76.4 MBytes 639 Mbits/sec [ 5] 5.01-6.00 sec 69.8 MBytes 586 Mbits/sec [ 5] 6.00-7.00 sec 75.4 MBytes 634 Mbits/sec [ 5] 7.00-8.00 sec 79.5 MBytes 666 Mbits/sec [ 5] 8.00-9.00 sec 74.6 MBytes 626 Mbits/sec [ 5] 9.00-10.00 sec 84.9 MBytes 712 Mbits/sec - - - - - - - - - - - - - - - - - - - - - - - - - [ ID] Interval Transfer Bitrate [ 5] 0.00-10.00 sec 783 MBytes 657 Mbits/sec sender [ 5] 0.00-10.05 sec 782 MBytes 653 Mbits/sec receiver iperf Done.
PS C:\> iperf3.exe --client 10.70.70.100 -u -b 0 Connecting to host 10.70.70.100, port 5201 [ 5] local 10.70.70.103 port 61963 connected to 10.70.70.100 port 5201 [ ID] Interval Transfer Bitrate Total Datagrams [ 5] 0.00-1.00 sec 48.6 MBytes 407 Mbits/sec 34890 [ 5] 1.00-2.00 sec 45.1 MBytes 378 Mbits/sec 32410 [ 5] 2.00-3.00 sec 47.0 MBytes 394 Mbits/sec 33720 [ 5] 3.00-4.00 sec 46.2 MBytes 387 Mbits/sec 33170 [ 5] 4.00-5.00 sec 48.5 MBytes 406 Mbits/sec 34810 [ 5] 5.00-6.00 sec 49.8 MBytes 418 Mbits/sec 35780 [ 5] 6.00-7.00 sec 47.5 MBytes 399 Mbits/sec 34150 [ 5] 7.00-8.00 sec 45.7 MBytes 383 Mbits/sec 32820 [ 5] 8.00-9.00 sec 48.3 MBytes 406 Mbits/sec 34690 [ 5] 9.00-10.00 sec 46.9 MBytes 393 Mbits/sec 33660 - - - - - - - - - - - - - - - - - - - - - - - - - [ ID] Interval Transfer Bitrate Jitter Lost/Total Datagrams [ 5] 0.00-10.00 sec 474 MBytes 397 Mbits/sec 0.000 ms 0/340100 (0%) sender [ 5] 0.00-10.06 sec 473 MBytes 394 Mbits/sec 0.044 ms 679/340100 (0.2%) receiver iperf Done. PS C:\> iperf3.exe --client 10.70.70.100 -b 1K Connecting to host 10.70.70.100, port 5201 [ 5] local 10.70.70.103 port 59958 connected to 10.70.70.100 port 5201 [ ID] Interval Transfer Bitrate [ 5] 0.00-1.01 sec 128 KBytes 1.04 Mbits/sec [ 5] 1.01-2.01 sec 0.00 Bytes 0.00 bits/sec [ 5] 2.01-3.01 sec 0.00 Bytes 0.00 bits/sec [ 5] 3.01-4.00 sec 0.00 Bytes 0.00 bits/sec [ 5] 4.00-5.01 sec 0.00 Bytes 0.00 bits/sec [ 5] 5.01-6.01 sec 0.00 Bytes 0.00 bits/sec [ 5] 6.01-7.01 sec 0.00 Bytes 0.00 bits/sec [ 5] 7.01-8.01 sec 0.00 Bytes 0.00 bits/sec [ 5] 8.01-9.01 sec 0.00 Bytes 0.00 bits/sec [ 5] 9.01-10.00 sec 0.00 Bytes 0.00 bits/sec - - - - - - - - - - - - - - - - - - - - - - - - - [ ID] Interval Transfer Bitrate [ 5] 0.00-10.00 sec 128 KBytes 105 Kbits/sec sender [ 5] 0.00-10.04 sec 128 KBytes 104 Kbits/sec receiver iperf Done.
SSID with VLAN TAG (ID: 50), from Wi-Fi client to Wired client:
PS C:\> iperf3.exe --client 192.168.50.101 Connecting to host 192.168.50.101, port 5201 [ 5] local 192.168.50.103 port 59474 connected to 192.168.50.101 port 5201 [ ID] Interval Transfer Bitrate [ 5] 0.00-1.00 sec 21.5 MBytes 180 Mbits/sec [ 5] 1.00-2.00 sec 22.6 MBytes 190 Mbits/sec [ 5] 2.00-3.00 sec 23.1 MBytes 194 Mbits/sec [ 5] 3.00-4.01 sec 18.9 MBytes 158 Mbits/sec [ 5] 4.01-5.00 sec 18.0 MBytes 152 Mbits/sec [ 5] 5.00-6.00 sec 18.2 MBytes 153 Mbits/sec [ 5] 6.00-7.00 sec 19.1 MBytes 160 Mbits/sec [ 5] 7.00-8.00 sec 25.9 MBytes 218 Mbits/sec [ 5] 8.00-9.00 sec 27.9 MBytes 234 Mbits/sec [ 5] 9.00-10.00 sec 27.1 MBytes 227 Mbits/sec - - - - - - - - - - - - - - - - - - - - - - - - - [ ID] Interval Transfer Bitrate [ 5] 0.00-10.00 sec 222 MBytes 186 Mbits/sec sender [ 5] 0.00-10.06 sec 222 MBytes 185 Mbits/sec receiver iperf Done. PS C:\> iperf3.exe --client 192.168.50.101 -u -b 0 Connecting to host 192.168.50.101, port 5201 [ 5] local 192.168.50.103 port 52152 connected to 192.168.50.101 port 5201 [ ID] Interval Transfer Bitrate Total Datagrams [ 5] 0.00-1.00 sec 46.1 MBytes 386 Mbits/sec 33100 [ 5] 1.00-2.00 sec 43.9 MBytes 368 Mbits/sec 31500 [ 5] 2.00-3.00 sec 44.9 MBytes 376 Mbits/sec 32220 [ 5] 3.00-4.00 sec 45.5 MBytes 382 Mbits/sec 32660 [ 5] 4.00-5.00 sec 47.1 MBytes 395 Mbits/sec 33810 [ 5] 5.00-6.00 sec 47.3 MBytes 397 Mbits/sec 33960 [ 5] 6.00-7.00 sec 48.1 MBytes 404 Mbits/sec 34580 [ 5] 7.00-8.00 sec 47.3 MBytes 397 Mbits/sec 33970 [ 5] 8.00-9.00 sec 45.4 MBytes 381 Mbits/sec 32600 [ 5] 9.00-10.00 sec 48.2 MBytes 404 Mbits/sec 34590 - - - - - - - - - - - - - - - - - - - - - - - - - [ ID] Interval Transfer Bitrate Jitter Lost/Total Datagrams [ 5] 0.00-10.00 sec 464 MBytes 389 Mbits/sec 0.000 ms 0/332990 (0%) sender [ 5] 0.00-10.05 sec 255 MBytes 213 Mbits/sec 0.083 ms 149690/332988 (45%) receiver iperf Done. PS C:\> iperf3.exe --client 192.168.50.101 -b 1K Connecting to host 192.168.50.101, port 5201 [ 5] local 192.168.50.103 port 59589 connected to 192.168.50.101 port 5201 [ ID] Interval Transfer Bitrate [ 5] 0.00-1.01 sec 128 KBytes 1.04 Mbits/sec [ 5] 1.01-2.01 sec 0.00 Bytes 0.00 bits/sec [ 5] 2.01-3.01 sec 0.00 Bytes 0.00 bits/sec [ 5] 3.01-4.01 sec 0.00 Bytes 0.00 bits/sec [ 5] 4.01-5.01 sec 0.00 Bytes 0.00 bits/sec [ 5] 5.01-6.00 sec 0.00 Bytes 0.00 bits/sec [ 5] 6.00-7.01 sec 0.00 Bytes 0.00 bits/sec [ 5] 7.01-8.00 sec 0.00 Bytes 0.00 bits/sec [ 5] 8.00-9.01 sec 0.00 Bytes 0.00 bits/sec [ 5] 9.01-10.01 sec 0.00 Bytes 0.00 bits/sec - - - - - - - - - - - - - - - - - - - - - - - - - [ ID] Interval Transfer Bitrate [ 5] 0.00-10.01 sec 128 KBytes 105 Kbits/sec sender [ 5] 0.00-10.05 sec 128 KBytes 104 Kbits/sec receiver iperf Done. SSID with VLAN TAG (ID: 50), from Wi-Fi client to Wired client, on LAG port: PS C:\> iperf3.exe --client 192.168.50.101 Connecting to host 192.168.50.101, port 5201 [ 5] local 192.168.50.103 port 59484 connected to 192.168.50.101 port 5201 [ ID] Interval Transfer Bitrate [ 5] 0.00-1.00 sec 19.5 MBytes 163 Mbits/sec [ 5] 1.00-2.00 sec 22.1 MBytes 185 Mbits/sec [ 5] 2.00-3.00 sec 22.4 MBytes 188 Mbits/sec [ 5] 3.00-4.00 sec 23.4 MBytes 196 Mbits/sec [ 5] 4.00-5.01 sec 22.9 MBytes 191 Mbits/sec [ 5] 5.01-6.00 sec 22.6 MBytes 190 Mbits/sec [ 5] 6.00-7.01 sec 22.4 MBytes 187 Mbits/sec [ 5] 7.01-8.00 sec 23.2 MBytes 195 Mbits/sec [ 5] 8.00-9.00 sec 24.6 MBytes 207 Mbits/sec [ 5] 9.00-10.00 sec 23.0 MBytes 193 Mbits/sec - - - - - - - - - - - - - - - - - - - - - - - - - [ ID] Interval Transfer Bitrate [ 5] 0.00-10.00 sec 226 MBytes 190 Mbits/sec sender [ 5] 0.00-10.07 sec 226 MBytes 188 Mbits/sec receiver iperf Done.
PS C:\> iperf3.exe --client 192.168.50.101 -u -b 0 Connecting to host 192.168.50.101, port 5201 [ 5] local 192.168.50.103 port 62021 connected to 192.168.50.101 port 5201 [ ID] Interval Transfer Bitrate Total Datagrams [ 5] 0.00-1.00 sec 41.9 MBytes 352 Mbits/sec 30120 [ 5] 1.00-2.00 sec 45.4 MBytes 380 Mbits/sec 32640 [ 5] 2.00-3.00 sec 45.9 MBytes 386 Mbits/sec 32940 [ 5] 3.00-4.00 sec 45.1 MBytes 378 Mbits/sec 32360 [ 5] 4.00-5.00 sec 47.0 MBytes 395 Mbits/sec 33790 [ 5] 5.00-6.00 sec 46.2 MBytes 387 Mbits/sec 33160 [ 5] 6.00-7.00 sec 46.1 MBytes 387 Mbits/sec 33090 [ 5] 7.00-8.00 sec 45.3 MBytes 380 Mbits/sec 32560 [ 5] 8.00-9.00 sec 46.5 MBytes 391 Mbits/sec 33420 [ 5] 9.00-10.00 sec 46.5 MBytes 390 Mbits/sec 33370 - - - - - - - - - - - - - - - - - - - - - - - - - [ ID] Interval Transfer Bitrate Jitter Lost/Total Datagrams [ 5] 0.00-10.00 sec 456 MBytes 382 Mbits/sec 0.000 ms 0/327450 (0%) sender [ 5] 0.00-10.06 sec 286 MBytes 239 Mbits/sec 0.048 ms 121893/327448 (37%) receiver iperf Done. PS C:\> iperf3.exe --client 192.168.50.101 -b 1K Connecting to host 192.168.50.101, port 5201 [ 5] local 192.168.50.103 port 59575 connected to 192.168.50.101 port 5201 [ ID] Interval Transfer Bitrate [ 5] 0.00-1.01 sec 128 KBytes 1.04 Mbits/sec [ 5] 1.01-2.01 sec 0.00 Bytes 0.00 bits/sec [ 5] 2.01-3.01 sec 0.00 Bytes 0.00 bits/sec [ 5] 3.01-4.01 sec 0.00 Bytes 0.00 bits/sec [ 5] 4.01-5.00 sec 0.00 Bytes 0.00 bits/sec [ 5] 5.00-6.01 sec 0.00 Bytes 0.00 bits/sec [ 5] 6.01-7.01 sec 0.00 Bytes 0.00 bits/sec [ 5] 7.01-8.00 sec 0.00 Bytes 0.00 bits/sec [ 5] 8.00-9.01 sec 0.00 Bytes 0.00 bits/sec [ 5] 9.01-10.00 sec 0.00 Bytes 0.00 bits/sec - - - - - - - - - - - - - - - - - - - - - - - - - [ ID] Interval Transfer Bitrate [ 5] 0.00-10.00 sec 128 KBytes 105 Kbits/sec sender [ 5] 0.00-10.05 sec 128 KBytes 104 Kbits/sec receiver iperf Done.
0
We appreciate your feedback. Feel free to let us know more. Log in to submit feedback.
0
We appreciate your feedback. Feel free to let us know more. Log in to submit feedback.
#3
Options
- Copy Link
- Report Inappropriate Content
Thread Manage
Announcement Manage
Posts: 15
Helpful: 3
Solutions: 1
Stories: 0
Registered: 2022-07-15
Re:EAP650(Eu) V1 - Lower throughput on tagged VLAN SSIDs
2022-07-22 16:51:48
@Fae Hello
Any update on the possible issues found by R&D? Also discussed here https://community.tp-link.com/en/business/forum/topic/559240
Is there any beta firmware I could test?
Thank you
0
We appreciate your feedback. Feel free to let us know more. Log in to submit feedback.
0
We appreciate your feedback. Feel free to let us know more. Log in to submit feedback.
#4
Options
- Copy Link
- Report Inappropriate Content
Thread Manage
Announcement Manage
Posts: 3604
Helpful: 1360
Solutions: 474
Stories: 0
Registered: 2020-06-30
2022-07-28 07:05:29
Posts: 3604
Helpful: 1360
Solutions: 474
Stories: 0
Registered: 2020-06-30
Re:EAP650(Eu) V1 - Lower throughput on tagged VLAN SSIDs
2022-07-28 07:05:29
Dear @s0x,
s0x wrote
Any update on the possible issues found by R&D? Also discussed here https://community.tp-link.com/en/business/forum/topic/559240
Is there any beta firmware I could test?
Sorry that I haven't been informed of an update on the issue yet. But the R&D team confirmed that they would provide a Beta firmware to fix the issue, I'll let you know once the beta firmware is available. Thank you for your great patience!
>> Omada EAP Firmware Trial Available Here <<
*Try filtering posts on each forum by Label of [Early Access]*
0
We appreciate your feedback. Feel free to let us know more. Log in to submit feedback.
0
We appreciate your feedback. Feel free to let us know more. Log in to submit feedback.
#5
Options
- Copy Link
- Report Inappropriate Content
Thread Manage
Announcement Manage
Posts: 15
Helpful: 3
Solutions: 1
Stories: 0
Registered: 2022-07-15
Re:EAP650(Eu) V1 - Lower throughput on tagged VLAN SSIDs
2022-07-28 13:23:40
0
We appreciate your feedback. Feel free to let us know more. Log in to submit feedback.
0
We appreciate your feedback. Feel free to let us know more. Log in to submit feedback.
#6
Options
- Copy Link
- Report Inappropriate Content
Thread Manage
Announcement Manage
Posts: 15
Helpful: 3
Solutions: 1
Stories: 0
Registered: 2022-07-15
Re:EAP650(Eu) V1 - Lower throughput on tagged VLAN SSIDs
2022-08-03 16:53:29
@Fae Hi
Sorry to bother you so much, any news?
Since reporting the issue I saw that another customer has opened a topic regarding issues with both EAP 670/653.
I also when opening this topic sent a support request via form, but never got any response or information regarding that.
Thank you
0
We appreciate your feedback. Feel free to let us know more. Log in to submit feedback.
0
We appreciate your feedback. Feel free to let us know more. Log in to submit feedback.
#7
Options
- Copy Link
- Report Inappropriate Content
Thread Manage
Announcement Manage
Posts: 3604
Helpful: 1360
Solutions: 474
Stories: 0
Registered: 2020-06-30
2022-08-04 05:57:07 - last edited 2022-08-04 11:58:44
Posts: 3604
Helpful: 1360
Solutions: 474
Stories: 0
Registered: 2020-06-30
Re:EAP650(Eu) V1 - Lower throughput on tagged VLAN SSIDs
2022-08-04 05:57:07 - last edited 2022-08-04 11:58:44
Dear @s0x,
s0x wrote
Sorry to bother you so much, any news?
Thank you for your query. It takes some time to work out a solution to the issue.
I've pushed the R&D team to make a beta firmware, will keep you informed in this original post once the beta firmware is ready.
Edit: @s0x the beta firmware has been provided in the mentioned post, please have a check. Thanks for your cooperation and patience!
>> Omada EAP Firmware Trial Available Here <<
*Try filtering posts on each forum by Label of [Early Access]*
0
We appreciate your feedback. Feel free to let us know more. Log in to submit feedback.
0
We appreciate your feedback. Feel free to let us know more. Log in to submit feedback.
#8
Options
- Copy Link
- Report Inappropriate Content
Thread Manage
Announcement Manage
Posts: 15
Helpful: 3
Solutions: 1
Stories: 0
Registered: 2022-07-15
2022-07-15 17:41:15
Posts: 15
Helpful: 3
Solutions: 1
Stories: 0
Registered: 2022-07-15
Information
Helpful: 0
Views: 1138
Replies: 7
Voters 0
No one has voted for it yet.
Related Articles
Problemas con EAP650
254
0
Report Inappropriate Content
Transfer Module
New message