Archer MR400 IPSec VPN
Hello,
I've just purchased an Archer MR400 (V4) and need to configure it as a VPN Client. The tplink website showed it is capable to do that, however in the configuration I only find OpenVPN and PPTP VPN. So it seems, in the V4 this feature is gone again. Anyone has an idea? Is there a firmware patch or beta firmware I could try to get IPSec going?
It's as bit strange tplink seems to not support IPSec any more in new system versions...
Any help is appreciated, really need to set this up to connect to my home network.
Thanks,
Mirko
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Hi, could you please double check the hardware version of your MR400 on the bottom label of the product itself? is it V4.0 or V4.20? the web interface usually doesn't show the small version after dot, so I would like to double check it, then send you the correct firmware to try.
And are you trying to create a IPSec site to site VPN?
- Copy Link
- Report Inappropriate Content
Thank you for your answer.
The label at the bottom of the router actually is ver. 4.20.
I need to set up the router as a VPN (IPSec) client. I want to connect from remote to my home network, the MR400 is at the remote site.
Thanks,
Mirko
- Copy Link
- Report Inappropriate Content
Hi, please try to install the following firmware and test if IPSec VPN works:
https://static.tp-link.com/upload/beta/2021/202112/20211230/Archer_MR400(EU)_V4.20_211229.zip
- Copy Link
- Report Inappropriate Content
@Sunshine What model of 4G router should I buy to be create LAN2LAN IPSEC VPN?
Before i used MR400v3 it's working perfectly. Now version 4.0 it's out of this option. I bought MR6400V5.3 but it isn't working for me. Any suggestions?
- Copy Link
- Report Inappropriate Content
Hi, we could troubleshoot the MR6400 V5.3 IPSec VPN issue first to locate the problem, please check the reply here:
https://community.tp-link.com/en/home/forum/topic/582074
- Copy Link
- Report Inappropriate Content
@Sunshine One more time thank you for support. I have question about your products. It's knows that is hard to buy proprer model and also proper hardware version of router which supports S2S VPN IPSEC. I was thinking that good way is checking emulator of product on your website to find out that IPSEC is present in options, but no it's not so easy.
For example MR600 v2 in emulator has VPN IPSEC function - Firmware Version:1.7.0 0.9.1 v0001.0 Build 220516 Rel.51493n Hardware Version:Archer MR600 v2 00000003. So I bought MR600 v2 and got device which Firmware Version:1.5.0 0.9.1 v0001.0 Build 210914 Rel.59719n Hardware Version:Archer MR600 v2 00000002 and there is no IPSEC!
1. I can't find firmware 1.7.0 0.9.1 which is used in emulator. Why?
2. I found that i can upgrade firmware to 1.4.0 0.9.1 v0001.0 Build 211018 Rel.69149n 9(btw it's looks like more downgrade then upgrade) but this is beta version which has water mark "Confidential Only For Test" Is it safe to use it?
3. when the beta version goes to the final version?
4.why it's so tricky? It should be easy to buy proper device but it isn't.
- Copy Link
- Report Inappropriate Content
Hi, Thank you very much for the feedback.
The features displayed on the emulator may depend on local regulations and different firmware versions, so it is for a reference only, for accurate information, please check the specification of the MR600 V2 on the official website, you will see that IPSec VPN is not included:
Regarding your other questions, here are the answers:
1. The 1.7.0 firmware is not available yet, and once it is ready, we will publish it on the official website
2. The beta firmware you mentioned is with IPSec VPN, there is water mark since it is not an officially released version, but you could still use it before official firmware released.
3. The release time is not confirmed yet, please pay attention to our official website
4. As mentioned above, it is recommended to check specification page of the product(remember to select correct version on Overview page first), if some information is not included thus you are still not sure, you could also contact our technical support team to confirm it.
- Copy Link
- Report Inappropriate Content
Do you have MR400 V4.3 beta firmware for ipsec??
- Copy Link
- Report Inappropriate Content
Hi, may I know if your MR400 V4.30 is EU version or APAC version? and what is your current firmware version?
- Copy Link
- Report Inappropriate Content
@Sunshine Hello is router Archer MR400 v4.3 00000002(EU) version embedded software 1.2.0 0.9.1 v0001.0 Build 220518 Rel.59424n
can whether get firmware supporting IPSEC VPN
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 5254
Replies: 47
Voters 0
No one has voted for it yet.