Remote port is not working.

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Remote port is not working.

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Remote port is not working.
Remote port is not working.
2022-08-21 13:00:06
Model: Archer C6  
Hardware Version:
Firmware Version:

Hello,

I have connected TL-WA850RE to my archer C6, I want to access the remotely Extender behind the Archer, I have added the entries as I use for others devices in Virtual Server. But once I want to login entering archer's IP along the port which I add as forwarding.

It shows error i.e (192.168.168.24:8081/error.html).

 

Archer C6 IP       : 192.168.168.24

TL-WA850RE  IP :  192.168.0.101 (LAN DHCP reserved)

 

Kindly assist in the above matter.

 

@terziyski

  0      
  0      
#1
Options
4 Reply
Re:Remote port is not working.
2022-08-21 19:59:06 - last edited 2022-08-22 07:19:51

  @Jdhn 

 

Archer C6 IP       : 192.168.168.24

TL-WA850RE  IP :  192.168.0.101 (LAN DHCP reserved)

 

If the port-forwarding in Archer C6 is like:

 

This might not work.  TL-WA850RE doesn't have any remote management settings.

If this was helpful click once on the arrow pointing upward. If this solves your issue, click once the star to mark it as a "Recommended Solution".
  3  
  3  
#2
Options
Re:Remote port is not working.
2022-08-22 06:18:32

 

Hello  @Jdhn 

When remotely access the local device behind router, make sure you use router's public IP/ wan IP address:

As Case2-step5, try WAN IP address in Advanced-Status-Internet sector

Port forwarding: how to set up virtual server on TP-Link wireless router?

If this does not work, it is recommended to go to whatismyip  website to check if the real public IP there is the same as the router's WAN IP.

If the wan IP is different, it is recommended to reach ISP side and see if they could assign an real IP address for you. 

 

 

  0  
  0  
#3
Options
Re:Remote port is not working.
2022-08-22 06:39:42

  @terziyski 
That's in the same IP range according to LAN IP. 

I have mentioned that I am accessing the extender behind Archer C6, others are working while the extender is showing the error as I mentioned earlier.

  0  
  0  
#4
Options
Re:Remote port is not working.
2022-08-22 06:44:31

  @Jdhn 

 

Archer C6

 

Hardware Version : Archer C6 v3.20

Firmware Version : 1.0.14 Build 20211118 rel.43110(4555)

 

Is there any settings in extender to enable port for remote access?

  0  
  0  
#5
Options