Login to ONU device
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
I have tried the default address of 192.168.1.1 of ONU device but it doesnt respond
If the Archer C20 is setup for PPPoE, then the ONU must be running in bridge mode.
In this case you can't login to the ONU via the Archer C20. It would be the same with any other router, though.
If you are sure the ONU responds to the IP address 192.168.1.1, then connect a computer directly to the LAN port of the ONU via Ethernet cable and manually configure the computer's Ethernet LAN port like shown in the picture below. (sample picture taken from Microsoft Windows)
Then try again to connect to the ONU via http://192.168.1.1
If the Archer C20 is setup for PPPoE, then the ONU must be running in bridge mode.
In this case you can't login to the ONU via the Archer C20. It would be the same with any other router, though.
If you are sure the ONU responds to the IP address 192.168.1.1, then connect a computer directly to the LAN port of the ONU via Ethernet cable and manually configure the computer's Ethernet LAN port like shown in the picture below. (sample picture taken from Microsoft Windows)
Then try again to connect to the ONU via http://192.168.1.1