Router behind router
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Router behind router
Hi
I have an Edgrouter X with two incoming WAN connections in failover mode for redundancy. The WAN connections come from 2x MR600. I need to access the management console of the Edgerouter X remotely. How do I configure the MR600 so that I can access the Edgerouter management console remotely via the MR600?
Re:Router behind router
You could try to remote access the ER X by setting up a virtual servers on both MR600 for ports 80 and 443.
Here, the Internal IP is the ER X WAN port IP address assigned by the corresponding MR600.
Internal port should be 80 or 443 (or both) according to the remote access configuration of ER X - HTTP/HTTPS protocol.
This could work only if your MR600 Internet IP address is a public IP address:
If this was helpful click once on the arrow pointing upward.
If this solves your issue, click once the star to mark it as a "Recommended Solution".